Discontinued Tvape Vaporizer

[RUDE BOY]

@jonan69 the TVape and the MFLB complement each other pretty well I think. The LB is a trusty little vape for when I'm vaping solo or trying to conserve a little. It served as my main vape for a long while.
Amazing with the power adaptor.

The long tVape has become one of my favorite goto vapes especially if I'm gonna be sharing with two or more people. The huge herb chamber really makes this a great crowd pleaser (ok, I'm old so three or four people are a crowd) Not the tastiest vapor but through a pinnacle style Water tool it never fails to blow everyone away. Cleaning is a breeze. As long as you can keep track of the mouthpiece as it pops off and bounces away, maintenance is near non existent. I really like it and think its a great addition to any vape collection(because we all know everyone collects vaporizers) also IMHO would serve someone well as their only vaporizing tool if they only do a session or two a day. PEACE ALL.

 

[jonan69]

I plug mine in on the third fill and use it as a pass through. Then let it finish charging and I'm good for at least 2 more fills. I'm really starting to like this and have gone back to flowers. Concentrates are good but a lot of risk with people selling under purged or dirty product

 

[_ooga_]

Thanks for the reply. Yes, I have held the button down, and I do understand the heating process. I still get the same results. I have tried a few other portable vapes and I don't think any of them give me truly satisfying rips. Now this is not a slam on the TVape because I think this is a very good unit and it's as good as any others I've tried. My problem is that I normally use an arizer q with a bag. I try not to compare them as they are completely different types of vaporizers but you know how that goes. I wanted the portable vape for travelling as the q is too bulky and the TVape fits that requirement nicely. Thanks for the tip on the coconut oil. I read that somewhere else and forgot about it.

I've been messing with my tvape for the past 3 months and had similar results when I first brought the unit home. I have it pretty much down now and get a nice session out of the tvape with a good number of nice thick rips. Here is a short video of me using the tvape with about a .2 of S.S. haze. At first warmup the hits are nice but its not till you get the oven a little warmer that it starts to really give out nice vapor clouds.

 

[4daLo]

Sorry for resurrecting an old threat but, I just got a T Vape, and I got problems. Whenever I heat the T vape with material already in it, by the time it heats up (green light) it's smelly and almost combusted. Then when i pull on it it comes out in a smokey/vapey/burnt popcorn tasting cloud. It's gross. However when I pack it up AFTER I heat it up, it works perfect, and vapes fine/good taste etc. But this pretty much defeats the purpose of it being portable due to the fact that I can't pack it up then go. Is there anything I can do about this or is my heating element just too hot for this to ever work properly?

 

[RUDE BOY]

I would say yours runs hot. Mine and the few I've used don't vape at all until you lay on the power a bit.
mine Hardly produces vapor after the initial heat up. I don't think there would be a fix besides getting a new chamber from T Vape.

 

[MyLife_Your_ENT]

Sorry I hate to bring up an old thread, but it says I have insufficient privileges to post a new thread. Just got the T-Vape yesterday and for the life of me can't figure out how to get it to work. This is my first experience with any vape so I'm very new to this. I read through a lot of this thread and tried most the tips that I could find that everyone gave. I'm looking to use loose flowers, but worse comes worst I'll roll one, but really wanna get it to work with loose. I saw the tips on how much to put in, how to pack it, where to put it in the oven, but nothing is working. I tried to grind it as fine as possible, but it's not like crazy fine where it's dust. I tried to put my flowers in a dark place with a light over it for a few hours to dry it out, but I don't think that helped. Is the main key to have dry flowers? Is that most likely my problem? My flowers will turn brown, but not too dark of a brown. Have only seen vapor come out twice and that was my roommate trying it. We tried letting it sit for awhile at the starting temp and even maxing it out another time we tried, all the same results. I rolled one and put it in and after it didn't work I took it out and I could tell the wrap was warm consistently top to bottom. I just don't know what's going on. It's made for rolled leafs and tried that and I still can't get vapor. Seems to be functioning fine, I must just be missing something. Is they key really just having dry herbs? Can anyone help me with this?

 

[NinjaMindTriks]

Sorry I hate to bring up an old thread, but it says I have insufficient privileges to post a new thread. Just got the T-Vape yesterday and for the life of me can't figure out how to get it to work. This is my first experience with any vape so I'm very new to this. I read through a lot of this thread and tried most the tips that I could find that everyone gave. I'm looking to use loose flowers, but worse comes worst I'll roll one, but really wanna get it to work with loose. I saw the tips on how much to put in, how to pack it, where to put it in the oven, but nothing is working. I tried to grind it as fine as possible, but it's not like crazy fine where it's dust. I tried to put my flowers in a dark place with a light over it for a few hours to dry it out, but I don't think that helped. Is the main key to have dry flowers? Is that most likely my problem? My flowers will turn brown, but not too dark of a brown. Have only seen vapor come out twice and that was my roommate trying it. We tried letting it sit for awhile at the starting temp and even maxing it out another time we tried, all the same results. I rolled one and put it in and after it didn't work I took it out and I could tell the wrap was warm consistently top to bottom. I just don't know what's going on. It's made for rolled leafs and tried that and I still can't get vapor. Seems to be functioning fine, I must just be missing something. Is they key really just having dry herbs? Can anyone help me with this?

This is the correct thread for the question, no worries about starting a new thread. I am sure someone in the forum will be along shortly to give you some tips . Hopefully you will get it straightened out. I've never had any experience with this vape.

 

[MyLife_Your_ENT]

This is the correct thread for the question, no worries about starting a new thread. I am sure someone in the forum will be along shortly to give you some tips . Hopefully you will get it straightened out. I've never had any experience with this vape.

Thank you. I appreciate that. I know some forums are very against bringing up old threads lol.

 

[paytonpenn]

I hate asking this but have you attempted to press the button for 20-25 seconds until flashes then inhale? Around the 3rd-5th flash you will notice thicker vapor. I notice the real vapor comes when the taste is gone (the good taste that is), how many flashes have you gone through for a single bowl?

 

[MyLife_Your_ENT]

I hate asking this but have you attempted to press the button for 20-25 seconds until flashes then inhale? Around the 3rd-5th flash you will notice thicker vapor. I notice the real vapor comes when the taste is gone (the good taste that is), how many flashes have you gone through for a single bowl?

Thanks for the the reply. Well when I said I looked for all the tips and tricks on this thread, I unfortunately lied to you, everyone, and myself lol. After posting this I reread through this forum and realized how just having it on and green isn't actually keeping it warm. It's a push to inhale, which is very much opposite of what the instructions portray. We tried maxing out the temp, but never knew there would be a flash after 20 or so seconds. Will it stop raising temp if u continue to hold it down after the flash? That could have been a problem. I'm currently out of herb so I can't try it right now, but with the new 20-25 second flash and hold to vape info, I might have a chance with this thing next session lol. Thanks for the reply. And unlike u thought, that wasn't a stupid question at all. I appreciate the advice.

 

[paytonpenn]

Will it stop raising temp if u continue to hold it down after the flash?

I believe so, I never have seen it combust but have vaped through a bowl until it was just black.

 

[MyLife_Your_ENT]

I believe so, I never have seen it combust but have vaped through a bowl until it was just black.

Hmm. Well which I had done material to try my new techniques! Lol.

 

[JakeisGreat1172]

Glad I found this thread I just ordered a t-vape long tube and I'm pretty darn excited for it! Not sure if this was mentioned or not but is there a possibility to use oil with it? I couldn't find a direct answer for the life of me. Much obliged!

 

[deadheadbill]

Only way I have found to use oil in it was to take a cotton pad, soak in alcohol, then use that pad to soak up oil. Let dry and put in tvape.

 

[JakeisGreat1172]

Only way I have found to use oil in it was to take a cotton pad, soak in alcohol, then use that pad to soak up oil. Let dry and put in tvape.

Very useful to know! I may try this if can ever get my hands on some hash oil. I'm suppose to get mine today, totally stoked!

 

[MyLife_Your_ENT]

Very useful to know! I may try this if can ever get my hands on some hash oil. I'm suppose to get mine today, totally stoked!

Only way I have found to use oil in it was to take a cotton pad, soak in alcohol, then use that pad to soak up oil. Let dry and put in tvape.

Can I ask the reasoning to soaking it in alcohol first? And do u soak in alcohol and dry then drench in oil and dry? Or drench in alcohol and oil then dry?

 

[deadheadbill]

So as the alcohol evaps, it pulls the oil into the fibers and you get more even distrubution. Also, it's just easier.

Wet cotton soaks up dry(ish) oil.

 

[JakeisGreat1172]

Another thing, would there be a workaround for dabs? Also, how do you guys feel about attempting to vape dmt with this particular vape. I would assume it would stay a deemster's vape what do you guys think?

 

[paytonpenn]

I would recommend a vape that has more temp control, does the alcohol smell or taste go away, I've tried that and said and replaced it with cotton with no alcohol.

EDIT:
Also how long should I wait for it to evap?

 

[bingers4all]

So I have been doing a lot of research and I am probably getting either the tVape or the vaporx xrt as those are pretty much the only two portable vaporizers that can be considered vape pens, and are for dry herb. I haven't been able to find too many reviews on the vaporx xrt. Has anybody heard or had any experience with it? It uses a vertical heating core inside the dry chamber so I don't know if it will combust the herbs being that there is no direct contact with a coil like the atmos. Any thoughts?

 

[RUDE BOY]

I've never seen one before now. ......................... @bingers4all Welcome to FC.

Edit; saw a few videos just showing the unit no videos showing anyone hitting one. Looks like it uses rebranded Chinese ecig parts. Don't think I would pay good money for this.

 

[mmenzie]

http://fuckcombustion.com/threads/vaporx-xrt.6975/

 

[paytonpenn]

@bingers4all I know my T-Vape works very well as a vaporizer in genenal, I would definitely prefer the amount of hits and flexibility it has over what the XRT seems to have. I know its IMPOSSIBLE, IMPOSSIBLE, for me to combust with my T-Vape. Everyone that has used it only has positive things to say, I just tell them to treat it like a bag vape and wait it they didn't get enough vapor on their first hit. 20 seconds later they end up coughing, smiling, and saying thanks.

But you can get a long T-Vape for 120 dollars

Edit:
I've been looking at it like this, the tvape has been out for 6 months and actually has a community and many usage videos, the xrt has been known of for over a year the manufacturer has yet to come here. While a spokesman for the tvape hasnt visited since August but at least they answered questions initially.

 

[deadheadbill]

I would recommend a vape that has more temp control, does the alcohol smell or taste go away, I've tried that and said and replaced it with cotton with no alcohol.

EDIT:
Also how long should I wait for it to evap?

Sorry payton, I missed this. I never taste alcohol. Just use organic cotton pads and be sure to let the alcohol evap completely. If you think about it qwiso is just hash oil with the iso evapped.

I keep one to clean up all my "spills" etc then when it get good and hash soaked vape it up.

 

[deadheadbill]

So I sold my extra Tvape to a member on here. It was working fine when I shipped it. But now when he plugs it in he say's it flashes orange instead of turning red or green? I did a google search and could find nothing.

Anybody here have a similar experience or ever heard of this?



EDIT: Nvm. Problem solved.