stickstones
Vapor concierge
those cookies would probably be attractive at any time other than when discussing goatse.
the unofficial FC bubbler thread
- Thread starter placetime
- Start date
placetime
Well-Known Member
Wow, one single word can really derail a thread, huh? 
I looked through bubbler ideas that people have posted in this thread and others. Below, I've listed some of the bubbler ideas/parameters that I've come across. What do y'all think?
- "good, thick, sturdy" glass -- what is "good"? does it need to be made from german glass or something? ; how thick is "thick"? 2mm? 4mm?
- small/short -- stealth; lower cost; minimal filtration needed; 5-7" tall maybe? taller if the mouthpiece is removable?
- GonG -- 19mm preferable over 14mm, unless it's a Dewaar? female joint preferable over male? is one option less expensive to make than the others?
- inexpensive -- less than $100 (yeah, I know--tough to accomplish--but proven to be possible)
- diffusion -- nothing too fancy to keep costs low; what is the best cheaper functional diffusion system? non-removable downstem? removable downstem? showerhead? disc perc? (i have no idea myself)
- clear glass --- to keep costs down (but leaves the option for the blower to make more $ by adding color for people who want it)
Also, I think I may have found a local place to talk to some blowers….
I looked through bubbler ideas that people have posted in this thread and others. Below, I've listed some of the bubbler ideas/parameters that I've come across. What do y'all think?
- "good, thick, sturdy" glass -- what is "good"? does it need to be made from german glass or something? ; how thick is "thick"? 2mm? 4mm?
- small/short -- stealth; lower cost; minimal filtration needed; 5-7" tall maybe? taller if the mouthpiece is removable?
- GonG -- 19mm preferable over 14mm, unless it's a Dewaar? female joint preferable over male? is one option less expensive to make than the others?
- inexpensive -- less than $100 (yeah, I know--tough to accomplish--but proven to be possible)
- diffusion -- nothing too fancy to keep costs low; what is the best cheaper functional diffusion system? non-removable downstem? removable downstem? showerhead? disc perc? (i have no idea myself)
- clear glass --- to keep costs down (but leaves the option for the blower to make more $ by adding color for people who want it)
Also, I think I may have found a local place to talk to some blowers….
Elluzion
Vapeosaurus Rex
Wow, one single word can really derail a thread, huh?
I looked through bubbler ideas that people have posted in this thread and others. Below, I've listed some of the bubbler ideas/parameters that I've come across. What do y'all think?
- "good, thick, sturdy" glass -- what is "good"? does it need to be made from german glass or something? ; how thick is "thick"? 2mm? 4mm?
- small/short -- stealth; lower cost; minimal filtration needed; 5-7" tall maybe? taller if the mouthpiece is removable?
- GonG -- 19mm preferable over 14mm, unless it's a Dewaar? female joint preferable over male? is one option less expensive to make than the others?
- inexpensive -- less than $100 (yeah, I know--tough to accomplish--but proven to be possible)
- diffusion -- nothing too fancy to keep costs low; what is the best cheaper functional diffusion system? non-removable downstem? removable downstem? showerhead? disc perc? (i have no idea myself)
- clear glass --- to keep costs down (but leaves the option for the blower to make more $ by adding color for people who want it)
Also, I think I may have found a local place to talk to some blowers….
I would honestly talk to some blowers or anyone you know who does glass. I feel like this is the best way to get exactly what you want and of course you will be satisfied with it as well. It is also nice to support a local business and amazing art :
The only issue is that it may be hard to fit the bill but never be afraid to ask about blemished pieces too, I have always had good luck with that
placetime
Well-Known Member
I would honestly talk to some blowers or anyone you know who does glass. I feel like this is the best way to get exactly what you want and of course you will be satisfied with it as well. It is also nice to support a local business and amazing art :
The only issue is that it may be hard to fit the bill but never be afraid to ask about blemished pieces too, I have always had good luck with that
Thanks for the advice. I'm definitely going to do that.
I'd still be interested in hearing what people here have to say about the different aspects of a bubbler for vaporizers. My guess is that when I go talk to some local blowers they won't know much of anything at all about vaporizers or connecting vaporizers to glass. But here, there are lots of people who are knowledgeable about both vaporizers *and* glass.
(I'm not one of them ![:\](/i/s/hmm.gif "Hmm :\")
)
Wow, one single word can really derail a thread, huh?
I looked through bubbler ideas that people have posted in this thread and others. Below, I've listed some of the bubbler ideas/parameters that I've come across. What do y'all think?
- "good, thick, sturdy" glass -- what is "good"? does it need to be made from german glass or something? ; how thick is "thick"? 2mm? 4mm?
You know already what I say about the other points you mention, but I can help with this one in particular:
Good glass = Schott/Duran, EU, Simax, or Corning/Pyrex. Schott being the best and Pyrex the worst.
Thickness starts to feel good at 3mm or more for a 50mm diameter tube. 5mm is gorgeous but hard to work.
Our hydrator mini uses 50mm X 3.5mm Schott and costs $90.
I don't have much time but I'd love to make an FC bubbler pretty much the same as our hydrator except for a fixed showerhead downstem and FC logo. Would need some interest though and an OK from FC.
WatTyler
Revolting Peasant
I'd be interested
I think they'd sell, and be well promoted by members here.
placetime
Well-Known Member
Thanks for the input VB!
It's clear that you have put a lot of thought into your bubblers (seems like, in a sense, we're sorta duplicating your efforts here in this thread 
) .I agree with WatTyler that something like that would sell. Do you think there would be much of a price increase to do a showerhead of some kind?
I'll find out. thank YOU
SoulCaptivesAreFree
Hazemaniac
i would be interested in a FC bubbler as well
i think they would move fast
i think they would move fast
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
IMO that little addition, gridding those slits, would improve airflow and diffusion a lot , am I wrong??I'll find out. thank YOU
Yes they would help make the bubbles smaller and send them out in different directions. The glassblowers I work with tend to bug out when I ask for things that make their life harder or make the part crack during production. But it seems really simple so I'll suggest it
As for the price of a bubbler... basically, if it's made in a small batch just for FC, it will cost more than a production piece, but my guy estimated somewhere at or just below $100 for this:
A bubbler just like the VB Hydrator Mini, except minus the sandblasted artwork (just would be bare glass), modified with a showerhead on the downstem.
To put a fancy FC logo on it I'd need some help from someone to buy the decals. Few hundred bucks for a minimum order.
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
I like the idea of bare glass. Count with me.Yes they would help make the bubbles smaller and send them out in different directions. The glassblowers I work with tend to bug out when I ask for things that make their life harder or make the part crack during production. But it seems really simple so I'll suggest it
As for the price of a bubbler... basically, if it's made in a small batch just for FC, it will cost more than a production piece, but my guy estimated somewhere at or just below $100 for this:
A bubbler just like the VB Hydrator Mini, except minus the sandblasted artwork (just would be bare glass), modified with a showerhead on the downstem.
To put a fancy FC logo on it I'd need some help from someone to buy the decals. Few hundred bucks for a minimum order.
But you know what will earn a lot of cool vibes here, IMO, for those like us on the search for the ultimate - $100 group,
a little nothing sandblasted , very small.
Like the first 100 maybe,
"FC-2012 by VB's"
That little gesture will make you the first
"unofficialy CHQ FC Bubbler" honoree
Big reputation IMO, well earned.
BTW, I can send by mail $2 if that will let me have my logo
BigDaddyVapor
@BigDogJunction
Yes they would help make the bubbles smaller and send them out in different directions. The glassblowers I work with tend to bug out when I ask for things that make their life harder or make the part crack during production. But it seems really simple so I'll suggest it
As for the price of a bubbler... basically, if it's made in a small batch just for FC, it will cost more than a production piece, but my guy estimated somewhere at or just below $100 for this:
A bubbler just like the VB Hydrator Mini, except minus the sandblasted artwork (just would be bare glass), modified with a showerhead on the downstem.
To put a fancy FC logo on it I'd need some help from someone to buy the decals. Few hundred bucks for a minimum order.
HOLY @#$%! We're THAT close!? VB, you are the man! Can't wait to see what's in store.
placetime
Well-Known Member
Yes they would help make the bubbles smaller and send them out in different directions. The glassblowers I work with tend to bug out when I ask for things that make their life harder or make the part crack during production. But it seems really simple so I'll suggest it
As for the price of a bubbler... basically, if it's made in a small batch just for FC, it will cost more than a production piece, but my guy estimated somewhere at or just below $100 for this:
A bubbler just like the VB Hydrator Mini, except minus the sandblasted artwork (just would be bare glass), modified with a showerhead on the downstem.
To put a fancy FC logo on it I'd need some help from someone to buy the decals. Few hundred bucks for a minimum order.
I'd probably be in for one with FC on it (especially if it actually said "Fuck Combustion"
)@VB--any story with that new avatar? is that a custom VB box?
placetime
Well-Known Member
What a hilarious idea. And what a great way to twist vtac's arm to get him to agree that this is a good idea and that VB should make some bubblers that say "Fuck Combustion".Yeah.... the "Fuck Combustion" would be nice. Normally I hate logos, but I'd make an exception.
Hell, I'll even pitch in to buy the first one off the line for vtac. If we get 10 people, it'll only cost us $10 each. Who's with me?
Thanks, NewVape. That's 2 of us so far. Placetime? You in, too?
Who else wants to be a part of FC history?
OhTheAgony
here for the chicks
I like the idea of giving Vtac a token of appreciation for all the work he does here. You can count me in if it's for one with a FC/FuckCombustion logo. I think he should have a say in how it (the logo) looks like if he decides to agrees with the idea though.
Thanks, OTA. I am hoping that vtac will approve once he gets buttered up with a dotanted bub.
tharealmclovin
Well-Known Member
I would definitely be in for a FUCK COMBUSTION bubbler in that price range.
tharealmclovin
Well-Known Member
Needs some more diffusion. I like the showerhead idea