-
SCAM WARNING! See how this scam works in Classifieds.
The Tempest by Mad Heaters & Phatpiggie
- Thread starter oddjobold
- Start date
BushRanger
Hit It & Quit It
Not much to add, thing smacks! 
What an experience this is.
Great vape, the best there is out there maybe.
I always tended to clean the exterior of the heat chamber after heating a dry run with my Dynavap.
Now doing this with the tempest 2 I know there is a melting point of the microfibre, because when I noticed that, I instantly removed the cloth.
The tempest was left with leftover residue from the microfibre cloth, that needed 320-grid paper and one-hour-job to remove it.
Boy, I almost killed my new friend.... since then do they build microfibre meltable?
However what a great experience this vape is... in many ways. Yes really.
Great vape, the best there is out there maybe.
I always tended to clean the exterior of the heat chamber after heating a dry run with my Dynavap.
Now doing this with the tempest 2 I know there is a melting point of the microfibre, because when I noticed that, I instantly removed the cloth.
The tempest was left with leftover residue from the microfibre cloth, that needed 320-grid paper and one-hour-job to remove it.
Boy, I almost killed my new friend.... since then do they build microfibre meltable?
However what a great experience this vape is... in many ways. Yes really.
Couple weeks into Tempest 2 and I gotta say I'm a big fan - eventually managed to open the ball screen (I think I was mentally blocking myself from turning harder) and replaced them with the rubies and I love them! I'm honestly not very good at evaluating differences, I just stick to the same settings forever but they still just felt better to me. Also took me a while to figure out unscrewing the top to change the head airflow, no idea what it was set to by default tbh because after I changed it I realised I wouldn't have been able to tell, but I went with about 40%.
I have to ask about this because I feel a little crazy reading these threads sometimes - I vape at home almost exclusively and with a waterpiece almost exclusively, and I like big hits with big vapour, 1HE, and dark AVB - and I usually heat my T2 to 370C until timeout which is way higher than anyone ever mentions
I did about the same on the T1, if not at a slightly lower temp, but I got a Wand late and used a torch for most of its life so I have no idea how that affects things. No idea if I have a battery issue, waterpiece difference, or I've just been a madman pushing the AVB to near combust every time. Which is true but I thought more people did that (I'm a bit of a casual) 
Still, on the rubies there is almost zero risk of combust at that temperature which is part of why I enjoy it. I heard they were good for microdosing but it's been pretty good for the exact opposite too! Started on the 0.2g setting to see how it was, went down to the 0.15g recently, and I think I'll eventually go to the 0.1g. All hit super hard. Also I love the new wand adapter, kinda crusty attachment method but I can't argue with results, had to clean out the old one a lot but this one just works. I also want to shout out all the new parts, the machining is lovely, did my first clean and it was super easy, and idk if anybody relates to this but just looking at the new CCD while thinking about cleaning the old one gives me dopamine.
I have to ask about this because I feel a little crazy reading these threads sometimes - I vape at home almost exclusively and with a waterpiece almost exclusively, and I like big hits with big vapour, 1HE, and dark AVB - and I usually heat my T2 to 370C until timeout which is way higher than anyone ever mentions
I did about the same on the T1, if not at a slightly lower temp, but I got a Wand late and used a torch for most of its life so I have no idea how that affects things. No idea if I have a battery issue, waterpiece difference, or I've just been a madman pushing the AVB to near combust every time. Which is true but I thought more people did that (I'm a bit of a casual) Still, on the rubies there is almost zero risk of combust at that temperature which is part of why I enjoy it. I heard they were good for microdosing but it's been pretty good for the exact opposite too! Started on the 0.2g setting to see how it was, went down to the 0.15g recently, and I think I'll eventually go to the 0.1g. All hit super hard. Also I love the new wand adapter, kinda crusty attachment method but I can't argue with results, had to clean out the old one a lot but this one just works. I also want to shout out all the new parts, the machining is lovely, did my first clean and it was super easy, and idk if anybody relates to this but just looking at the new CCD while thinking about cleaning the old one gives me dopamine.
Dirigible_Molecule
Retired rebel.
Microfibre cloths are woven micro plastic fibre. Not organic material.
I do not let plastic get near my vapes or food, most plastics shed fibres and particles constantly, our planet is full of it from the fish in the sea to the top of Everest. The dust on any floor, or desk is composed of skin bits, grit and fibres shed from clothing, furniture and bedding. Now predominantly plastic.
I do not like to eat or breath in plastic but it's very hard to avoid now, so the last thing I'll intentionally do is vape it!
I use organic cotton buds and cotton cloth for vape cleaning. I sometimes use ISO wipes if very dirty but always wash out after, as they are man made fibre.
Sorry for the diversion from V2 but for me it's a very important issue, these man made fibres and solid plastics contain some very very nasty chemicals.
kokolokokolokon
Well-Known Member
Time since i shared a video. I dont use the tempest with full bowl usually, nor use the bong never. But everything for the show 
Wand at 290C, 2,5mm SiC balls, full chamber:
I should share a triple flame video too
Wand at 290C, 2,5mm SiC balls, full chamber:
I should share a triple flame video too
sternit
Active Member
is this a bad joke?
"I’m very sorry, but the EU warehouse is no longer in operation and I won’t be able to get hold of your T2.
I’ve sent a refund, you should be able to order another full Ti from VDN in Germany around the end of the month. Sorry for the inconvenience once again. "
i never asked for a refund. i pre-ordered a full ti pre-order tempest v2. paid for it in time .. and thats it? thats not how i imagined this at all. i am so pissed right now ...
"I’m very sorry, but the EU warehouse is no longer in operation and I won’t be able to get hold of your T2.
I’ve sent a refund, you should be able to order another full Ti from VDN in Germany around the end of the month. Sorry for the inconvenience once again. "
i never asked for a refund. i pre-ordered a full ti pre-order tempest v2. paid for it in time .. and thats it? thats not how i imagined this at all. i am so pissed right now ...
ChasinTerps
New Member
Wow thats bad. Did you get this via email?
sternit
Active Member
yes, together with an "your ordr has been cancelled" email. this is hard to digest. others get promised more shit for having to wait that long, i get an "f you, have fun trying again".
BushRanger
Hit It & Quit It
sternit
Active Member
thank you brenyo for figuring something out! those 2 mails just hit me in the wrong spot after all the anticipation and the long wait. glad you found a soultion that wont make me feel devastated. i gladly wait some more if i know i get my ti tempest!
ChasinTerps
New Member
Good to hear mate. Also good to hear that mh keeps up their a+ customer service
Mine will arrive tomorrow in case i can trust the tracking
So excited
EU warehouse no longer in operation? Uhh. Will EU customers still be able to get the v1 upgrade kit etc.?
ChasinTerps
New Member
Does so. know why its not in operation anymore?
HaggisHunter
Well-Known Member
For those looking at polishing their tempests etc, I know @Brenyo has already posted a video and details of what sandpaper/polishing cream, but if anyone wants a simpler way, look for 'cape cod polishing cloths' - all you do is takes one out the pack, rub it for as long as you like and it'll get rid of micro scratches and marks from wear and tear. I've used them for years and they're awesome.
Over the last few days I've been refinishing a lot of my titanium parts, I've removed a lot of old anodising with these cloths, the metalwork looked great after working on them, and the refreshed anodising job looks really clean so they do give a really good finish to the metal.
The cloths also smell nice.
Over the last few days I've been refinishing a lot of my titanium parts, I've removed a lot of old anodising with these cloths, the metalwork looked great after working on them, and the refreshed anodising job looks really clean so they do give a really good finish to the metal.
The cloths also smell nice.
Fearless Disaster
Well-Known Member
I am interested in this too. I was just chatting with a us maker in the community whose european partner has gone out of business because of the tariff uncertainty and the inability to quote accurate prices. I am wondering if this is something similar. In any case it seems like something unfortunate has happened and besides the jonesing ents in this thread I hope that not too many people are suffering because of this.
ChasinTerps
New Member
The silver polishing sticks from amazon work fine for all of my devices (ss & ti). For me its more convenient than operating with a polish paste. Its just the rougher side to get rid of the scratches (and oxidation, finger-fat burn marks) followed by the smoother side for the shining
And its just 10 bucks for 20 pcs
Oh, that is super interesting. I still have some of exactly these polishing cloths! Do you need to clean the head with iso after using them?
Can you also use them on Dyna caps? And they don't damage the material?
HaggisHunter
Well-Known Member
I've used those sticks before, yeah they're ok, but they can make a mess of things.The silver polishing sticks from amazon work fine for all of my devices (ss & ti). For me its more convenient than operating with a polish paste. Its just the rougher side to get rid of the scratches (and oxidation, finger-fat burn marks) followed by the smoother side for the shining
And its just 10 bucks for 20 pcs
The main reason for suggesting the cloths is because you literally can't go wrong with them, it's just a soft cloth with some liquid soaked in it, no aggressive pastes or polishes etc, nothing hard, all you do it rub and it'll come up a nice level finish without much effort, give it a clean and your good to go.
@MegaChip use them on anything metal, so yeah fine on Dynavaps etc, if you want to polish the cap with one, just plug the bottom so none of the liquid can sneak up into the discs.
I stripped mine to bits after before using the cloths on it so it could be cleaned properly, yeah give them a good clean afterwards.
jefferson9
Well-Known Member
Is the silicone dynavap wand insert okay to use with the v1 tempest?
Found a few comments here of people saying it works fine and some reddit threads of conflicting info.
Also any sellers of the v1 madheaters insert in the US?
Found a few comments here of people saying it works fine and some reddit threads of conflicting info.
Also any sellers of the v1 madheaters insert in the US?
ChasinTerps
New Member
Ok i see. Can speak just for me and the ones i use (these from the simrell live streams) led to visually (and technically) flawless devices (fusion 2.0, tempest og, convector).
Of course I made sure all air holes were closed and after the treatment I made a proper iso soak to clean from any metal particles before usage.
Thats just my experience
the dynavap wand adapter worked for me on the v2, but I did switch back to using the v2 madheaters adapter for now as I'm still dialing in exactly what height I want to use and the dynavap adapter moves around a bit easier than I like for consistency while I'm still testing what I like to use the best.
