The Pinnacle by Vaporblunt

Chill Dude

Well-Known Member
As with all of our products, there isn't anything anywhere near the airpath that isn't rated way beyond the heat it encounters.

I would still like to know more about the material safety and exact heat ratings of the materials used in the vapor path. Especially the plastic and Teflon materials. I'm sure you along with your engineer and other consultants have done extensive research and testing of the materials used in your products. However, a little more transparency would be much appreciated. After all, safety is the primary concern of most vaporizer users. If you can address this concern, then we can put this issue to rest and move on. Thanks TRVB....
 

BlueCloud

Well-Known Member
Any info on the safety of the product would be great. Also, is the electronics area sealed, maybe with silicone or o-rings? Just wondering how likely a small amount of air could be drawn from that area.
 

Dreamerr

Always in a state of confusion and silliness♀
Wow intentional receipts look different with more detail. I know that is an arbitrary thought but I think stuff like that is interesting.
 
Dreamerr,

al bundy

Vaporist
Do you have to sign for the package if you order through gotvape?
I know the free shipping is UPS.

Edit
Scratch that on my phone it shows a mobile version which different.

Just called them Any order over $150 needs signature.
 
al bundy,

GoGlass

Well-Known Member
Just for information, i live in France.
So 47$ are shipping costs for [USA => France], it's 36€, so ok it's acceptable....for me!

And Yes TVRB, i'am with Chil Dude & BlueCloud to just explain a little bit more the Air path AND the Vapor path (who are two differents things of course......)

And i also want to know when thevaporblunt.com will be updated with Mouthpieces , Pong adapters, and bullets for the Pinnacle....
 

IF II INI C IHI

Aka VapeGod
Just for information, i live in France.
So 47$ are shipping costs for [USA => France], it's 36€, so ok it's acceptable....for me!

And Yes TVRB, i'am with Chil Dude & BlueCloud to just explain a little bit more the Air path AND the Vapor path (who are two differents things of course......)

And i also want to know when thevaporblunt.com will be updated with Mouthpieces , Pong adapters, and bullets for the Pinnacle....

yea waiting on that reply from trvb, I called Gotvape and they said they were still sold out of the bullets and would get back to me via email when they will be getting more. So i'll keep if you guys posted for people that are interested
 
IF II INI C IHI,

Entiba

New Member
I placed my order from GotVape earlier this morning, and apparently my order is now Back Ordered.. Meaning they are obviously out of stock of the Vape.. I was hoping it would ship out today.. Too bad!

Also, Medical Mark, after currency exchange, my final total for The Pinnacle with WT was $315.11 CAD from GV with 20% discount. So, unless the $317 price tag you keep mentioning is in US dollars, then there is only a $2 difference between ordering directly from TRVB and GV with 20% discount. Just my two cents!
 
Entiba,

Medical Mark

Well-Known Member
Well that's good $2.00 saving right on still a saving right and its was Canadian funds but hey there i par with each other the cdn and US dollars so I guess its not that bad then hey.
You'll love this thing for sure.
 
Medical Mark,
  • Like
Reactions: Entiba

Entiba

New Member
Well that's good $2.00 saving right on still a saving right and its was Canadian funds but hey there i par with each other the cdn and US dollars so I guess its not that bad then hey.
You'll love this thing for sure.

I'm super excited for this thing! Can't believe I have to wait for a back order~! :(
&
Yea, I agree saving is still saving!
 
Entiba,
hey everyone. this vape seems like it’s a great portable. these reviews have me excited about it. Does anyone plan on doing a video soon

Alright yo, witness the Pinnacle.



Have you tried sandwiching any other concentrates other than kief? Really interested to know how the high temp setting handles waxes, oils, full melts, and bubble.

Thanks

New to the forum ...great info here. I decided on purchasing a PN largely based on the R&D I've read in this thread, lol. Thanks to all who've forged ahead in this endeavor.
btw...got vape has the wt for 100 but can get 20% off order, so good deal.
anyone know/try if this would be effective mixing concentrates w/ dried flowers in the bullet
Thanks.

In regards to the Solo v PN, I see the PN as a compliment or wingman to the Solo. The short battery life and lack of chargethrough makes the Pinnacle unsuitable for daily driver usage, but it's awesome size makes it great as a portable.

Once I consolidate and shift around some of my extra glass and vapeware, I'll be picking up a Pinnacle and Water tool for my portable vapor usage, and using my Solo as my at home/extended session vaporizer, thanks to it's more flexible attachment system (I plan on getting a female jointed stem for it to pair with my PVHES Male GonG) and passthrough technology.

BTW, can anyone touch on the Pinnacle's ability to take concentrates?

I just tried some Blue Dream with a nice glob of CO2 Honey Oil; highly recommended.

The flavor was awesome and I got thoroughly medicated. I wanna pick up some hash soon; I have no doubt that the PN will kill it. I'm not sure it would get hot enough to vape solid waxes like shatter.

Despite the battery life and lack of pass-through, I've been using the PN daily on my way to and from work, as well as in bed before bedtime. Depending on your needs, I think the PN makes a great daily driver.

UpUpandAway, where did you get that case for your Pinnacle+WT? How do you like it compared to the Pax (for on-the-go use)?

csw beat me to it and he is correct; it's an omicron case. I think it's a generic case that different companies brand with their own logo; most e-cig stores will carry them under the eGo brand. You can also go to D9.

http://www.delta9vapes.com/products.php?product=Omicron-Carry-Case

The PN kills the Pax, imo. Before the PN, the Pax was my go-to portable/stealth flower vape. With the Pax I like the fact that I can load a lot (usually 0.5g) and the size and design are awesome. However, the PN outshines the Pax because, due to it being primarily convection, the load isn't constantly cooking and lasts much longer. While the PN does produce some odor, the Pax is much more noticeable.I think the screen and narrow air path in the mp of the PN help to contain some vapor. As sticks said, if it's off then I feel completely comfortable carrying it in my pocket.

So far, I haven't run into any problems with usage of the PN. The Pax, otoh, well... the mp sticking got suuuuper annoying.

Both are extremely portable and stealthy, but I like the size and shape of the PN better. It's longer than the Pax, but also skinnier, and I like how it fits in my hand.

I was about to order than found out it wont charge and vape at the same time

I was hoping for this feature as well, but I don't consider it a deal breaker. The portability, stealth, efficiency, and wt more than make up for the lack of pass-through capability.

If you ever tried the INH that would be more of the same category to me.

The feature of the inh that I like most is its pass-through, even in the car. However, I never liked the flavor profiles I got from the inh. The PN slays the inh in that regard. The first 3 hits I get from the PN are pretty damn tasty. Imo, the 1st hit I get from the inh is no bueno.

I usually started on 5 when I used the inh, and I already found the vapor to be uncomfortably hot at that point. The low setting on the PN is very manageable for me and I feel is much more effective than what I get even from level 6 on the inh. High on the PN will make me cough towards the end of the session, but that's where the wt takes over.

I also feel like the PN feels more significant in the hand than the inh; I always felt that the inh was too lightweight (at least for me).

I came here to ask about the vapor heat without the wt as well.
Also wondering how this device is to take a few puffs, turn it off and start again later. Sometimes I just want to hit it and quit it instead of a session.

I can affirm sticks' experiences regarding this aspect of the PN. I use the PN on low on my way to work until the auto-shutoff, at which point I'm sufficiently medicated. On the way home I can continue to hit it on high until the auto-shutoff, at which time the abv is an even medium/dark brown. In other words, you can hit it and quit it without worry of losing vapor.

Does it have a huge smell in your pocket abv and fresh loaded as others do? Does it have a cap on top to hold the smell in somewhat?

I don't think odor is an issue. When you initially turn it o, it does smell, but not to the degree of the pax. There's no cap, but I think the narrow airpath of the mp helps to hold vapor, and hence the smell, from getting loose.

Well we all get vas from hanging out here. I don't use my solo out in fact only did one time. I use the INH which you don't have so can't compare. I wanted a cera for the cleaning but without a latching switch and the switch placement it would be a pain. Since this is primary convection I am assuming, wrong maybe, that the temp can be controlled with breath even though there are two settings. Please correct me if I am wrong. I wanted the ascent and more then likely will get it again for cleaning but it won't be out for a bit... I actually rotate between my solo and INH almost daily cause it is easier for me to use then the ssv in bed...

Yes, I've found that temp can be controlled by draw speed. Sometimes I use a "micro-hit" technique similar to what's used with the mflb; the intervals between hits helps space out any harshness.

Regarding usage in bed, the PN can easily be used while lying on your back. If you are able to sit upright in bed, then you can use the wt, making it an awesome vape to use in bed.

@FINCH.. How long does it take for you to go for another back to back session with the steel bullet? I know it gets pretty hot so how long do you wait til you can handle it? Reason asking is because I usually go for back to back sessions or reload right away with my XP.

This depends on where you want to do a back-to-back load. At home, I just dump the spent bullet onto the table (it's hot as fuck) and pop in a freshly loaded one. If I'm out and about, I have a small container that I can dump the hot bullet into.

how easy is it to clean the inside of the pinnacle?

The only part of the PN that needs "cleaning" is the chamber where the bullet sits; all you need to do is brush out any specks of abv. However, I have some dark spots on the white heating element that sits at the bottom of the chamber where the bullet goes. I haven't noticed any change in performance, but I'm sure some people will want to clean this part.

Trvb, do you have a recommended way to clean the heating element?
 

Dreamerr

Always in a state of confusion and silliness♀
up and away that is an excellent post that answered so many questions for all of us I am sure but certainly for me. Mine will be here tomorrow the only day I am leaving the house lol. I should be home before UPS cause they come late.

Do we need to do burn ins? If so how with this vape?
 

TheHerbalReview

@TheHerbalReview
up and away that is an excellent post that answered so many questions for all of us I am sure but certainly for me. Mine will be here tomorrow the only day I am leaving the house lol. I should be home before UPS cause they come late.

Do we need to do burn ins? If so how with this vape?

NO! That's one thing that's great about the Pinnacle. They do all the heating core testing themselves and that includes the burn-in process. So, no nasty-ass chemicals burning off giving you cancer.
 

TherealVaporblunt

Well-Known Member
Manufacturer
yea waiting on that reply from trvb, I called Gotvape and they said they were still sold out of the bullets and would get back to me via email when they will be getting more. So i'll keep if you guys posted for people that are interested

1. Bullets were being packaged which caused the delay. I will have them this week, hopefully tomorrow

2. $3.99 is not the price, the person you spoke to must have been misinformed. They come in packs of two. I can't quote prices for GV but expect to pay more, just FYI.

Thanks UU&A for that detailed post. Sorry about any confusion surrounding the Pinnacle, we have the bumps pretty much worked out. Launching a new product and doing 3 trade shows in 4 weeks was a little more difficult than i expected.I will work on getting the safety info some of you requested. Other than that things are really going well. I still haven't found a person who used the pinnacle that doesn't like/love it. I look forward to hearing more reviews.
 

SiDankies

Well-Known Member
1. Bullets were being packaged which caused the delay. I will have them this week, hopefully tomorrow

2. $3.99 is not the price, the person you spoke to must have been misinformed. They come in packs of two. I can't quote prices for GV but expect to pay more, just FYI.

Thanks UU&A for that detailed post. Sorry about any confusion surrounding the Pinnacle, we have the bumps pretty much worked out. Launching a new product and doing 3 trade shows in 4 weeks was a little more difficult than i expected.I will work on getting the safety info some of you requested. Other than that things are really going well. I still haven't found a person who used the pinnacle that doesn't like/love it. I look forward to hearing more reviews.

Any word on if the pro will ever release?
 
SiDankies,

VAPORIZER22

Well-Known Member
The Pro is still at the drawing board in a way. We are trying to cram all the extras into the same housing and that is proving problematic. To be completely honest there is a chance the pro will not ever come out. The technology might have to be housed in a slightly larger body, which makes it dangerously similar to VB 2.0. I have yet to use a pinnacle pro I am happy with, so I have kind of shut down on answering questions because they are all speculation.

As for the pinnacle, I am stoked to hear all of your feedback!! I am working on some cool accessories currently, but I am going to learn my lesson from prematurely announcing the pro and wait until they are finalized before I give details. Thanks again

EDIT: no, the pinnacle does not work while charging.
 

HazyDaze

Active Member
I would still like to know more about the material safety and exact heat ratings of the materials used in the vapor path. Especially the plastic and Teflon materials. I'm sure you along with your engineer and other consultants have done extensive research and testing of the materials used in your products. However, a little more transparency would be much appreciated. After all, safety is the primary concern of most vaporizer users. If you can address this concern, then we can put this issue to rest and move on. Thanks TRVB....

If this issue were to be resolved, I would order one within a minute....
 

Crohnie

Crohn's Warrior
I placed my order from GotVape earlier this morning, and apparently my order is now Back Ordered.. Meaning they are obviously out of stock of the Vape.. I was hoping it would ship out today.. Too bad!


Anybody know if the Pinnacle is on back order....or is it available? It doesn't say anything about it on Gotvape
 
Crohnie,

al bundy

Vaporist
^^^^ when I called them yesterday they said it was in stock and it showed in stock online. Just call them.
 
al bundy,
  • Like
Reactions: Crohnie
Top Bottom