The Pinnacle by Vaporblunt
- Thread starter TherealVaporblunt
- Start date
UpUpandAway
YWF
Sorry to butt in, but I've found that I can go 4 "sessions" before the Pinnacle dies on me. Each session I let the Pinnacle run until it turned off on its own. I had 2 sessions in the morning and 2 at night.
TheHerbalReview
@TheHerbalReview
Same, very close to the expected time given by VaporBLUNT on the instructions. I've got around 45 min give or take both times...
stickstones
Vapor concierge
take their words for it, as I've never let it run dry. I always try to keep it topped off so it doesn't run out.
Just had my first session with the matrix. i started it out on high to see what it could do and i let it warm up an extra minute. It filled the can quickly but then got overwhelmed. the beginning of each draw was nice and then it would lighten up. the matrix made the hits nice, whereas they are borderline harsh for me without the water on just about any vape. The taste was average, but my experience has been that the matrix removes flavor pretty consistently. i packed the load with an average grind and got lighter duff than when lightly packed. and i hit it til it was done...i beat the autoshutoff. I probably won't do it again, as I am used to running the Cloud and the LSV and a few logs like the HI through the matrix and that's just not fair. this is a portable vape and that's what it excels at. but once again, despite all that, I am plenty ripped from the session, so no complaints in the end!
I need to go update my sig's portable usage now...
Just had my first session with the matrix. i started it out on high to see what it could do and i let it warm up an extra minute. It filled the can quickly but then got overwhelmed. the beginning of each draw was nice and then it would lighten up. the matrix made the hits nice, whereas they are borderline harsh for me without the water on just about any vape. The taste was average, but my experience has been that the matrix removes flavor pretty consistently. i packed the load with an average grind and got lighter duff than when lightly packed. and i hit it til it was done...i beat the autoshutoff. I probably won't do it again, as I am used to running the Cloud and the LSV and a few logs like the HI through the matrix and that's just not fair. this is a portable vape and that's what it excels at. but once again, despite all that, I am plenty ripped from the session, so no complaints in the end!
I need to go update my sig's portable usage now...
Should be more like 50-65 seconds depending on weather
Edward Hyde
Well-Known Member
how can i place an order?your website is merely working...+ cant find anything about the water tool edition...+ i've sent u 2 emails and u havent answered yet..
stickstones
Vapor concierge
have you checked gotvape? i saw the unit but i dont know if they had the WT
TheHerbalReview
@TheHerbalReview
I'll have a full video review/demo up by next friday at youtube.com/TheHerbalReview!
As with all of our products, there isn't anything anywhere near the airpath that isn't rated way beyond the heat it encounters.
Medical Mark
Well-Known Member
Just a little survey everyone that got a water tool liked it right?
Now did anyone find it deformed, or defective in anyway flat on both ends able to standup straight?
I'm just wondering what others water tools showed up like in good shape, blown nice not deformed in any way ?
I was wondering since mine is some what deformed on the bottom and can stand up straight.
I would like to now if anyone else has tis deformity or its just my damn bad luck.
Cheers, medical mark
Now did anyone find it deformed, or defective in anyway flat on both ends able to standup straight?
I'm just wondering what others water tools showed up like in good shape, blown nice not deformed in any way ?
I was wondering since mine is some what deformed on the bottom and can stand up straight.
I would like to now if anyone else has tis deformity or its just my damn bad luck.
Cheers, medical mark
GoGlass
Well-Known Member
Yes TVRB, Post #336, overvaped want to know if we can recharge the Pinnacle with this :
"I have checked the pinnacle power adapter and it has this output: 5v 3A so I think this could be used with the right connector.
http://www.amazon.com/Lightning-Sensation-Thunderbolt-connectors-customized/dp/B009USAJCC/ref=sr_1_1?ie=UTF8&qid=1363422782&sr=8-1&keywords=anker® Astro3E 10000mAh
A question for TRVB or CentiZen...(any other one is warmly welcome)
the pinnacle's charging interface is standard? Do you know the name/identifier/measure of that connector?"
I don't see any answer at this time................
BlueCloud
Well-Known Member
Do you know where the Teflon is?
Edit: I found it. Would be great to see some pictures of the inside though.
stickstones
Vapor concierge
the pong has always come with the WT's going back to the VB2. My WT stands tall and proud!
We're not going to get interior pics of this thing unless someone rips theirs apart. These engineers are pretty tight-lipped.
trvb...I'm old school from when we used to rip a vape to shreds about its interior parts. Two years ago this thread would be screaming for more info on the internals of this unit. I think after the teflon discussions around the HerbalAir and the plastic discussions around the Iolite, we've gotten unnecessarily more lax around here. The reality is that most materials used in these vapes are rated for cooking and food consumption, because no one but us vaporists are concerned with what it might do to the hot air that passes over it. I would feel more comfortable seeing the MSDS sheets on the teflon and plastic used in the unit. I can't see any reason for your engineers not to provide this.
Don't get me wrong...I'm not saying I think the materials used in this vape are dangerous...just that I don't know. But these questions about materials have been lingering unanswered since the release of the VB2, and I find the silence on the issue a little unsettling. Providing the MSDS sheets will put an end to this discussion for good.
We're not going to get interior pics of this thing unless someone rips theirs apart. These engineers are pretty tight-lipped.
trvb...I'm old school from when we used to rip a vape to shreds about its interior parts. Two years ago this thread would be screaming for more info on the internals of this unit. I think after the teflon discussions around the HerbalAir and the plastic discussions around the Iolite, we've gotten unnecessarily more lax around here. The reality is that most materials used in these vapes are rated for cooking and food consumption, because no one but us vaporists are concerned with what it might do to the hot air that passes over it. I would feel more comfortable seeing the MSDS sheets on the teflon and plastic used in the unit. I can't see any reason for your engineers not to provide this.
Don't get me wrong...I'm not saying I think the materials used in this vape are dangerous...just that I don't know. But these questions about materials have been lingering unanswered since the release of the VB2, and I find the silence on the issue a little unsettling. Providing the MSDS sheets will put an end to this discussion for good.
UpUpandAway
YWF
My wt is flat on the bottom and can stand on its own.
Medical Mark
Well-Known Member
Anyone else want to comment on there water tool and the quality and finish.
iamn3ko
Well-Known Member
I think it's just your bad luck Mark, 2 weeks for the Cera, faulty wt.
I think you need to stop breaking mirrors or walking under ladders or something, time to turn that luck around.
I asked in the Cera jibberish thread but this might be better.
Does anyone have any input on how the Pinnacle compares to the Cera LL as far as vapor production? I'm thinking I might have to get one of these if the CLL continues the way it is.
how can i place an order?your website is merely working...+ cant find anything about the water tool edition...+ i've sent u 2 emails and u havent answered yet..
I don't have any emails from you. Call our phone number if you'd like and pace your order that way.
GoGlass
Well-Known Member
My brain is apparently not able to process this sentence ....... Pics please !!!
And thanks Mark for sharing your initials thoughts about the PN !
How do you compare it with the Solo (draw, taste) ?
New to the forum
...great info here. I decided on purchasing a PN largely based on the R&D I've read in this thread, lol. Thanks to all who've forged ahead in this endeavor.
btw...got vape has the wt for 100 but can get 20% off order, so good deal.
anyone know/try if this would be effective mixing concentrates w/ dried flowers in the bullet
Thanks.
...great info here. I decided on purchasing a PN largely based on the R&D I've read in this thread, lol. Thanks to all who've forged ahead in this endeavor.btw...got vape has the wt for 100 but can get 20% off order, so good deal.
anyone know/try if this would be effective mixing concentrates w/ dried flowers in the bullet
Thanks.
Seriously, that GV deal is insane. I am actually going to call him to see if he did that by mistake because he isn't making any money. The water tool is $130 retail, so $80 is crazy. If I were you guys I would buy those up ASAP if you are interested.New to the forum
btw...got vape has the wt for 100 but can get 20% off order, so good deal.
anyone know/try if this would be effective mixing concentrates w/ dried flowers in the bullet
Thanks.