The J-hook thread!

[2tiki]

I've been using a super cheap (very thin glass) J-hook that a friend had bought from alliexpress, and eventually gave to me. It works fine, but since it's been my main glass style I like to use these days, I was thinking I should get one that doesn't seem as fragile, and just keep this one as a back up in case I break the new one.
I can't drop much money on one, so I assume I need to find something that is maybe just one or 2 steps up in quality than the one I already have. I definitely want one that is totally clear so I can see the vapor build up in it as I draw. Any suggestions of where I should buy one from, and if you have any specific models in mind, feel free to let me know that too.

Hoping to find something (maybe on sale?) for less than $50 including shipping (I'm on the west coast of USA). I am open to either 14mm or 18mm connector since I have glass bowls of each size to use with it.

 

[Texus]

Not sure the sort of J-hook you want is available for that cheap. But maybe look at Oregon Glass Blower. Great quality stuff.

MT hood OREGON

I USE ONLY THE HIGHEST QUALITY AMERICAN AND GERMAN MANUFACTURED GROUND GLASS FITTINGS.

oregonglassblower.com

 

[Shit Snacks]

I've been using a super cheap (very thin glass) J-hook that a friend had bought from alliexpress, and eventually gave to me. It works fine, but since it's been my main glass style I like to use these days, I was thinking I should get one that doesn't seem as fragile, and just keep this one as a back up in case I break the new one.
I can't drop much money on one, so I assume I need to find something that is maybe just one or 2 steps up in quality than the one I already have. I definitely want one that is totally clear so I can see the vapor build up in it as I draw. Any suggestions of where I should buy one from, and if you have any specific models in mind, feel free to let me know that too.

Hoping to find something (maybe on sale?) for less than $50 including shipping (I'm on the west coast of USA). I am open to either 14mm or 18mm connector since I have glass bowls of each size to use with it.

I would suggest skimming backwards to see you some options? If you want another cheap hook from China, you can get one that is more functional, and better quality... Many different hooks and more from artisans

 

[2tiki]

Not sure the sort of J-hook you want is available for that cheap. But maybe look at Oregon Glass Blower. Great quality stuff.

MT hood OREGON

I USE ONLY THE HIGHEST QUALITY AMERICAN AND GERMAN MANUFACTURED GROUND GLASS FITTINGS.

oregonglassblower.com

Thanks for the suggestion, Texus. I took a look. This one has VERY thick glass, and while not exactly the style I was thinking of getting, could possibly work, but I'd need to get it on sale to be in my budget. It's definitely higher quality than what I would expect to be able to get for the price I need to pay. https://oregonglassblower.com/shop/ols/products/14mm-glass-mouthpiece-with-cooling-spikes-female

This is also different style than I was thinking, but could possibly work, but I'm not sure if there would be enough space for the log vape to fit on the bowl since the stem goes straight up and is very close to the bowl/connector. But at least it's not as much money as the other one. https://oregonglassblower.com/shop/...ss-j-hook-mouthpiece-flat-end-8-14m-gls-j-hk3

I would suggest skimming backwards to see you some options? If you want another cheap hook from China, you can get one that is more functional, and better quality... Many different hooks and more from artisans

I did that but kept finding dead links or ones to very nice, but out of my price range J-hooks, so I posted to ask about it. I was probably looking too far back. I'll skim some pages that are newer, and hopefully find some working links. I am willing to buy "china glass", as long as it's better quality than the one I already have. Although I guess I could just buy another similar one and that way I still have a back up for not much money. I'm just hoping to find something that's decent, not super low quality. It doesn't need to be artisan quality.

I'm also wondering if maybe a very small bong, used dry would serve the same function of giving me visual feedback on the vapor production so I don't over cook the herb while drawing on the log vape.

 

[Shit Snacks]

Thanks for the suggestion, Texus. I took a look. This one has VERY thick glass, and while not exactly the style I was thinking of getting, could possibly work, but I'd need to get it on sale to be in my budget. It's definitely higher quality than what I would expect to be able to get for the price I need to pay. https://oregonglassblower.com/shop/ols/products/14mm-glass-mouthpiece-with-cooling-spikes-female

This is also different style than I was thinking, but could possibly work, but I'm not sure if there would be enough space for the log vape to fit on the bowl since the stem goes straight up and is very close to the bowl/connector. But at least it's not as much money as the other one. https://oregonglassblower.com/shop/...ss-j-hook-mouthpiece-flat-end-8-14m-gls-j-hk3

They are extremely high quality, and that's what I was talking about, more functional with the right angles, and there is the Chinese version like that... You can't compete with OGB for quality, but much more pricey and could require more patience depending on the order and timing etc... He customizes anything however

I did that but kept finding dead links or ones to very nice, but out of my price range J-hooks, so I posted to ask about it. I was probably looking too far back. I'll skim some pages that are newer, and hopefully find some working links. I am willing to buy "china glass", as long as it's better quality than the one I already have. Although I guess I could just buy another similar one and that way I still have a back up for not much money. I'm just hoping to find something that's decent, not super low quality. It doesn't need to be artisan quality.

Did you skim backwards from here or did you start at the beginning? Always getting backwards... Presuming what you have is a basic China hook so it wouldn't be tough to beat, and there are a lot of different dry glass aside from hooks like hammers too

I'm also wondering if maybe a very small bong, used dry would serve the same function of giving me visual feedback on the vapor production so I don't over cook the herb while drawing on the log vape.

Of course, there's a variety of different options for water pieces, that are specifically good dry for cooling, but also anything can work dry in some fashion, you would have to try more to know what you would like as there are many I would not bother with dry myself due to the perc or volume etc.

 

[nicknobody]

@2tiki how about something like this? Look under “utility glass” he has a bunch of options. The all clear ones are sorta thin although nice. The heady ones are thicker. Hurry before they are gone and you need to wait for another drop…

VP08 18/14mm Vapor Pipe

Not a vaporizer!! This is a 18mm Vapor Pipe with additional 14mm reducer. Ready to pair with your favorite 14 or 18mm vape or fitting This Vapor Pipe is comprised of 2 pieces. An 18mm female main body section. And a 14mm reducer Comes as shown, approximately 7 inches long Hand made in Oregon

theroguewaxworks.com

 

[2tiki]

@2tiki how about something like this? Look under “utility glass” he has a bunch of options. The all clear ones are sorta thin although nice. The heady ones are thicker. Hurry before they are gone and you need to wait for another drop…

VP08 18/14mm Vapor Pipe

Not a vaporizer!! This is a 18mm Vapor Pipe with additional 14mm reducer. Ready to pair with your favorite 14 or 18mm vape or fitting This Vapor Pipe is comprised of 2 pieces. An 18mm female main body section. And a 14mm reducer Comes as shown, approximately 7 inches long Hand made in Oregon

theroguewaxworks.com

I am looking for something that won't obscure the vapor inside it that much. I need to watch the vapor for temp modulation with the log I'm using.

I saw this post from a few pages ago, and I think that especially using it dry would probably give me a lot of visual feedback, and I love the look of it. I am trying to figure out if they ever go on sale so I can keep under budget. But if I'm going to spend more than $50 with shipping, it will have to be something I am this into the look of.

Deco Bubbler

Step into a new era of refinement with the Deco Bubbler—a striking fusion of vintage design and modern function. Inspired by the bold symmetry of Art Deco glassware, this bubbler transforms your ritual into a moment of effortless sophistication. With its fluted glass texture and sculptural form...

nwtnhome.com

 

[hashmasta kut]

I can make you something in your price range for you if you want.

 

[2tiki]

I can make you something in your price range for you if you want.

Oh? Thanks!
Do you have any links to an example similar to what you are thinking?

 

[Fearless Disaster]

Oh? Thanks!
Do you have any links to an example similar to what you are thinking?

there are a bunch in the last few pages, but i imagine they can make something to your specs. HMK is excellent to work with, here is their instagram:

Login • Instagram

Welcome back to Instagram. Sign in to check out what your friends, family & interests have been capturing & sharing around the world.

www.instagram.com

 

[hashmasta kut]

there are a bunch in the last few pages, but i imagine they can make something to your specs. HMK is excellent to work with, here is their instagram:

Login • Instagram

Welcome back to Instagram. Sign in to check out what your friends, family & interests have been capturing & sharing around the world.

www.instagram.com

Ya I can do similar shape to my usual and will consider other ideas as well

 

[2tiki]

Ya I can do similar shape to my usual and will consider other ideas as well

Those are gorgeous! The blue sparkly one is especially beautiful. https://www.instagram.com/p/DI9jrz7TvQN/

I'll send you a PM so we can discuss the details.

Thanks!

 

[Shit Snacks]

I'll send you a PM so we can discuss the details.

Yeah I thought it was clear, offering to make you whatever you had in mind, a lot of the glass artists in this community are good like that and they charge reasonable price, clear can be quite reasonable! And the quality typically much better as well of course

 

[2tiki]

Yeah I thought it was clear, offering to make you whatever you had in mind, a lot of the glass artists in this community are good like that and they charge reasonable price, clear can be quite reasonable! And the quality typically much better as well of course

I know absolutely nothing about getting custom glass made. It makes sense now what he meant, but obviously I didn't get that right away. I assumed it would be out of my budget to even get a non-custom one from an artist, and I have no idea who the quality glass makers are. This is good news! Except after looking at all this beautiful glass art, I'm starting to see how people get (J) hooked on collecting glass. LOL

Except for a bong I won at a dispensary, and the crappy J-hook that a friend gave me, I've always just used accessories that came with whatever vape I owned at the time. This is all new territory for me. LOOK WHAT FC HAS DONE TO ME!!!! LOL

First FC gave me VAS, now I think it's giving me GAS. LOL

 

[Flotsam]

Couple fresh pieces, a rare taller one, pretty rad

Jacob Carson on Instagram: "Tallboy on the right, recent one on the left for scale"

38 likes, 8 comments - _hmkglass_ on May 17, 2025: "Tallboy on the right, recent one on the left for scale".

www.instagram.com

So these are really nice especially w the feet. My only question is whether they take a 14 mm wpa or is the bowl only suitable for smoking?

 

[coolbreeze]

So these are really nice especially w the feet. My only question is whether they take a 14 mm wpa or is the bowl only suitable for smoking?

It's a 14mm female joint (he also makes 10mm ones) so no bowl.

 

[hashmasta kut]

14mm joint is what is in there. also a three hole diffuser, works well wet or dry.