Herbal Ant
Well-Known Member
Check it out guys, another chance to win an Herbalizer on Facebook! 
http://woobox.com/yu8a8r/7ylsuv
http://woobox.com/yu8a8r/7ylsuv
The Herbalizer
- Thread starter nopartofme
- Start date
lazylathe
Almost there...
I like to either load a small amount in an empty bowl and blow up a bag, works really well for me.
Or i grind some herb up and loosely half fill bowl, add a scoop of hash and mix with the herb. Vape away!
I was looking through my stash and found a pile of hash that i had forgotten about...
And i made some Dry Ice hash a few days ago from my trim, got a nice amount of 73 micron super blonde hash!!! YUM!
Josh's Dad
Father of the Herbalizer.com founder
Hello FC community.
Oops, accidentally posted and just removed an ancient message. If you saw it, forget it. Hmmmm, something must be having an effect on me.
In any event, please continue and keep up the most interesting dialogue in town.
Oops, accidentally posted and just removed an ancient message. If you saw it, forget it. Hmmmm, something must be having an effect on me.
In any event, please continue and keep up the most interesting dialogue in town.
Last edited:
Mister G
Deceptively Old Fart
Thanks Josh's dad and everyone at Team Herbie.
Any info or ETA on availability of the OOS accessory items (whips, aroma pads, etc.)?
nigel
And shepherds we shall be,for Accuracy & Discovery
Uhhh..... Isn't that an OLD post from back before the Herbalizer was available?
EDIT: Original post here: http://fuckcombustion.com/threads/the-herbalizer-shipping-rambling-thread.11960/page-2#post-509876
mmafighterthe25
Well-Known Member
Loving the shit out of my herbie.
Josh's Dad
Father of the Herbalizer.com founder
Geez, I just found out that a faux pas is the best way to get a response. Thanks Nigel.
MikeInMiami
Well-Known Member
On my quest to replace my recently dead SSV, I had the immense fortune of acquiring the first Herbie to reach Miami, thanks to a fellow named Sean stopping by to demo a unit at my local head shop. I couldn't wait to get home and start filling up some bags. The expireince was oddly reminiscent of christmas morning as a child, I was almost too excited to get the box open. The level of quality is unparalleled in my opinion, far nicer then i would have guessed, from packaging to fit and finish of the unit. One bowl of fresh herb was enough to fill the bag three times which put me over the moon in no time. Im left speechless...what can I way that others didn't already touch on? I couldn't be happier with my purchase 
Vapodudule
Well-Known Member
I found few glitches in the matrix of herbalizer :
-it consumes 3 Watts being off, i really ask myself if this 3 watt is employed for SETI program.
-one buzzing noise when off appears on unidentified conditions. disappears when pressed and put upside down. does not appear constantly.
-lack of pressure for blowing bags. Did not identified all the conditions of static pressure drop but the time of bags aren't stable in time at all. it varies. One famous condition of it is when you filled the bowl and killed the airflow with very very fine blended particles clogging the up filter.
Now i grinched, here is some entertainment and photos.
two tubes on the bowl and then
here is a 18mm connection
the complete set up which permits to grab, connect/disconnect and blow bags with a direct look on them. the set up for clearing the whole path is very very convinient since the herbalizer is on the floor for me. the magnetic bondage is a must have for it. The sphere tells me the density.
guess who reclaim with SS mesh balls?
-it consumes 3 Watts being off, i really ask myself if this 3 watt is employed for SETI program.
-one buzzing noise when off appears on unidentified conditions. disappears when pressed and put upside down. does not appear constantly.
-lack of pressure for blowing bags. Did not identified all the conditions of static pressure drop but the time of bags aren't stable in time at all. it varies. One famous condition of it is when you filled the bowl and killed the airflow with very very fine blended particles clogging the up filter.
Now i grinched, here is some entertainment and photos.
two tubes on the bowl and then
here is a 18mm connection
the complete set up which permits to grab, connect/disconnect and blow bags with a direct look on them. the set up for clearing the whole path is very very convinient since the herbalizer is on the floor for me. the magnetic bondage is a must have for it. The sphere tells me the density.
guess who reclaim with SS mesh balls?
Vape-Nation
Well-Known Member
glad I'm not the only one with the buzzing noise, but mine goes away when i put the bowl back in place, so perhaps its a vibration near the magnetic ring.
also, curious how you measured the 3 watts off?
thanks for your info!
Vapodudule
Well-Known Member
With a watt meter.
Been Vapin
Fringe Class
12 hours without Herbie seems to my breaking point. I don't want Herbie. I NEED Herbie.
Keep your Herbie clean.
I was slacking on cleaning Herbie and noticed a decreased taste and performance.
Some of my happiness ballons are on their third new turkey bag. Fills and tastes so much better with a fresh balloon. If your having problems with your current bag, grab a fresh one.
Keep your Herbie clean.
I was slacking on cleaning Herbie and noticed a decreased taste and performance.
Some of my happiness ballons are on their third new turkey bag. Fills and tastes so much better with a fresh balloon. If your having problems with your current bag, grab a fresh one.
Been Vapin
Fringe Class
No there isn't. I'll throw one together. 4:20
lazylathe
Almost there...
nigel
And shepherds we shall be,for Accuracy & Discovery
A review is out:
http://gizmodo.com/herbalizer-vaporizer-review-high-times-at-a-higher-pri-1577704204
And like most reviewers, he only took a cursory look at the Herbie. I understand reviewers have a lot going on, but very few I've seen actually take the time to learn a device. Shame really.
http://gizmodo.com/herbalizer-vaporizer-review-high-times-at-a-higher-pri-1577704204
And like most reviewers, he only took a cursory look at the Herbie. I understand reviewers have a lot going on, but very few I've seen actually take the time to learn a device. Shame really.
Last edited:
Been Vapin
Fringe Class
What you'll need:
ISO
Sharp knife, Scissors, or Razer Blade
Something to wipe with
New Oven/Turkey/Volcano/Etc. Bag
Take your stock bag.
Pull hard on the bag, pulling out the bag system. You can see how the outer ring is on backwards. My fault.
Pull off the outer ring. It looks sloppy because I had to disassemble this valve to figure out how to reassemble the other ones.
Pull off this orange ring and put to the side.
I wipe everything down very well with ISO except the orange ring. Be careful not to break the inner valve thing or rip your silicone mouthpiece. If this happens its no big deal.
Take your bag and pinch it/bunch it up evenly in the middle. Make sure the top is somewhat even.
Slip over the orange ring. Make sure all of the bag makes it through the ring.
Blouse or pull over the top of the bag a half inch to an inch over the ring. Make sure the bag is above the ring and evenly dispersed.
Reinsert inner valve piece. Note how even the size of the blouse is. The bottom is even, just a bad pic.
Cut excess bag off. Make the bag flush with the top of the inner valve piece. Be careful not to cut the orange ring. If you do cut the ring then you simply make a new one using a a piece of turkey bag.
Decent cut. Make sure all of your bag is tucked in. Try to position orange ring near top.
Another view.
Slide on outer valve holder.
Enjoy a fresh bag, and put your other freshies back in the box.
If your finished product leaks then take it apart and make sure the bag is completely above the orange ring. I had to take apart the valve in the pics and readjust.
Don't get frustrated if you are having trouble or problems with this method. Remember the bags aren't desgined to be replaceable, or are they?
ISO
Sharp knife, Scissors, or Razer Blade
Something to wipe with
New Oven/Turkey/Volcano/Etc. Bag
Take your stock bag.
Pull hard on the bag, pulling out the bag system. You can see how the outer ring is on backwards. My fault.
Pull off the outer ring. It looks sloppy because I had to disassemble this valve to figure out how to reassemble the other ones.
Pull off this orange ring and put to the side.
I wipe everything down very well with ISO except the orange ring. Be careful not to break the inner valve thing or rip your silicone mouthpiece. If this happens its no big deal.
Take your bag and pinch it/bunch it up evenly in the middle. Make sure the top is somewhat even.
Slip over the orange ring. Make sure all of the bag makes it through the ring.
Blouse or pull over the top of the bag a half inch to an inch over the ring. Make sure the bag is above the ring and evenly dispersed.
Reinsert inner valve piece. Note how even the size of the blouse is. The bottom is even, just a bad pic.
Cut excess bag off. Make the bag flush with the top of the inner valve piece. Be careful not to cut the orange ring. If you do cut the ring then you simply make a new one using a a piece of turkey bag.
Decent cut. Make sure all of your bag is tucked in. Try to position orange ring near top.
Another view.
Slide on outer valve holder.
Enjoy a fresh bag, and put your other freshies back in the box.
If your finished product leaks then take it apart and make sure the bag is completely above the orange ring. I had to take apart the valve in the pics and readjust.
Don't get frustrated if you are having trouble or problems with this method. Remember the bags aren't desgined to be replaceable, or are they?
Last edited:
letter never sent
reckoner
Very poor review IMO. He spent more time complaining about the lid than actually discussing the features of the device.
Madcap79
Jack of all trades, master of none.
Makes the hits cooler and smoother. Hello there.
I feel the most highly regarded reviews can be relied upon from our own experienced expert FC members. There is no greater resource! JMO
Madcap79
Jack of all trades, master of none.
I know it's been said a bunch but I love vaping in the lower half of the scale in the daytime and hit it on the high end at bedtime. Great little machine. I usually take everything I've vapid throughout the day (through different vapes) and dump it in the bowl and blow a bag at the highest temp. Good evening all. 
Way to go!!!I know it's been said a bunch but I love vaping in the lower half of the scale in the daytime and hit it on the high end at bedtime. Great little machine. I usually take everything I've vapid throughout the day (through different vapes) and dump it in the bowl and blow a bag at the highest temp. Good evening all.
Makes the hits cooler and smoother. Hello there.
Hi there,
I have my herbie hooked up to the toro 13 to 7 red dome. I'm not sure if it's what I think yet. It is really smooth, I feel like I should be getting more visible vapor. Is potency being lost?