The Herbalizer

grokit

well-worn member
Awesome information here. Would you be able to point me in the right direction to acquiring these bushing/o-rings?

While the sizes aren't labeled individually, I can tell you that they are both in this kit:
71XtO3k%2BzYL._SL1500_.jpg

http://www.amazon.com/gp/product/B0037UPC94/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
 

mysterion

The Vaporizer Avenger
Has anyone else had their magnet on the bottom of their bowl dislodge? I have had it happen to me twice now. All I do to pull it off is grab the bowl and pull towards me.... comes off pretty easy.... but the magnet glue is weak I guess?

Just wanted to chat about it with you guys before I let sheila and the team know.
 
mysterion,

mysterion

The Vaporizer Avenger
Chatting with them 1st might be in order... and save time.
I don't imagine there is any glue used in the bowl assembly.
I am sure they are ready to help you.


Will Do. The first one that went had an orange glue on the back. The most recent one looks like it had a type ofjb-weld type looking stuff. obviously it's not jb weld....just what it looks like.

Side note for you Vitolo...

How do you like the effects of herbie through glass when compared to your epic nano or other similar types?

Mysterion
 
mysterion,

white russian

Well-Known Member
The best date i can find as per the herbalizer homepage, is an international release scheduled in 2015, can anyone shed a more concrete date on this, as my interest is severely piqued at the moment with this?
 
white russian,

Vitolo

Vaporist
How do you like the effects of herbie through glass when compared to your epic nano or other similar types?
It is a difficult task to try to make a fair comparison between Herbie and other vapes.
When you say through glass, I will assume you mean through pure glass path and not through water.
The small glass device I made to use with Herbie had a purpose. That was to prevent me from having a tube to clean, as the extra hot sessions can produce a fair amount of condensate. I actually prefer the comfort of sitting back and using a whip.
The Nano (and similar vapes) are difficult to compare to this as they do smaller loads that are consumed faster. With E-Nano for example, I do not really care if I am using the glass or wooden stems. With the Zaps I used wood/glass/nylon stems.. All good for me... and I actually prefered the nylon stems.. for the ease of cleaning. Smaller loads used at once, so naturally one can become more medicated using larger amounts of meds, as Herbalizer can hold.
The effects is what you specifically asked about here... not taste... or convenience.. so I will answer directly. I like the effects that I get when I use Herbie. They are the same for me whether I use glass, whip or bag.
The effects depend not on my vapor path, but rather on the temperature I choose. I can choose a temerature that allows me to with precision, dial in how I would like to feel.
There is a great deal of versatility to Herbie. If you are a glass fancier, than naturally you will love using glass with the unit.

Edit:
OK.. I did a number of hits, and can answer your question better.
When using the Nano, the hits with glass are great.
When using the Herbalizer at higher temps with just glass the hits are great also, but
perhaps twice the punch, because I can fit twice the meds into the Herbalizer, and still finish it in just a few hits.
Nothing shabby about either of the vapes. Obviously there is a large difference in technology utilized.
 
Last edited:

mysterion

The Vaporizer Avenger
It is a difficult task to try to make a fair comparison between Herbie and other vapes.
When you say through glass, I will assume you mean through pure glass path and not through water.
The small glass device I made to use with Herbie had a purpose. That was to prevent me from having a tube to clean, as the extra hot sessions can produce a fair amount of condensate. I actually prefer the comfort of sitting back and using a whip.
The Nano (and similar vapes) are difficult to compare to this as they do smaller loads that are consumed faster. With E-Nano for example, I do not really care if I am using the glass or wooden stems. With the Zaps I used wood/glass/nylon stems.. All good for me... and I actually prefered the nylon stems.. for the ease of cleaning. Smaller loads used at once, so naturally one can become more medicated using larger amounts of meds, as Herbalizer can hold.
The effects is what you specifically asked about here... not taste... or convenience.. so I will answer directly. I like the effects that I get when I use Herbie. They are the same for me whether I use glass, whip or bag.
The effects depend not on my vapor path, but rather on the temperature I choose. I can choose a temerature that allows me to with precision, dial in how I would like to feel.
There is a great deal of versatility to Herbie. If you are a glass fancier, than naturally you will love using glass with the unit.

Edit:
OK.. I did a number of hits, and can answer your question better.
When using the Nano, the hits with glass are great.
When using the Herbalizer at higher temps with just glass the hits are great also, but
perhaps twice the punch, because I can fit twice the meds into the Herbalizer, and still finish it in just a few hits.
Nothing shabby about either of the vapes. Obviously there is a large difference in technology utilized.



Apologies! I did mean through a glass water piece. I tried a 8" ufo sidecar bubbler attached the herbie... effects are quite good.... But I was wondering if the same can be achieved from the e-nano as well..... @ 200$$. I'm looking for the punch in the face, happy times, followed by a nice movie watching time!

I guess I'm researching this as well in order to help a few others i know too. So I'm trying to get all info I can. I really do like the temp control, versatility, and function of herbie..... but can the nano milk a bubbler and clear a .1-.25 ish load and smack you in the face?

I forgot to mention as well..... This convection vape uses a small airpatch through that upper screen. When drawing through a bubbler, it tends to block the air path with little bits of herb..... Does your nano or evo have these concerns?
 
Last edited by a moderator:

Vitolo

Vaporist
Apologies! I did mean through a glass water piece. I tried a 8" ufo sidecar bubbler attached the herbie..but can the nano milk a bubbler and clear a .1-.25 ish load and smack you in the face?
I get your drift now.
Not trying to be avoidant to hold out on information, but out of respect for the forum and the manufacturer that is represented in this thread.
This thread may not be inhabited by all that many Nano owners, so your question would be best posed in E-Nano's thread, where all there will be able to answer.
...a small airpatch through that upper screen. When drawing through a bubbler, it tends to block the air path with little bits of herb.............
... have these concerns?
Especially when I try to use bubblers, most vaporizers I have used have these concerns.
Not being a big fan of water filtration, while at the same time being very tolerant bits of herb/abv in my mouth, I vape dry, with shortened airpath when I can.
 

ataxian

PALE BLUE DOT
While the sizes aren't labeled individually, I can tell you that they are both in this kit:
71XtO3k%2BzYL._SL1500_.jpg

http://www.amazon.com/gp/product/B0037UPC94/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
What is the temperature rating?
Well that took a long time!! LOL!!!
Waiting for your thoughts and review!

I just read the pages on this tread.
Definitely my next vaporizer!
I love the ones I have for different reasons however I could put this on my coffee table and tell visitors this is a medical device!

I could call it the "MEDICATER"!
 
Last edited:

Madcap79

Jack of all trades, master of none.
So now that I have a Herbie headed my way, what's the best way of connecting it to a tube or bubbler? I apologize if this has been discussed ad nauseam. Thanks in advance.

Quick question, is the 'spout' coming off the Herbie bowl approx. the same size as the bowl of a E-Nano water adapter? Just trying to get some ideas together.
 
Madcap79,

Mister G

Deceptively Old Fart
So now that I have a Herbie headed my way, what's the best way of connecting it to a tube or bubbler? I apologize if this has been discussed ad nauseam. Thanks in advance.

Quick question, is the 'spout' coming off the Herbie bowl approx. the same size as the bowl of a E-Nano water adapter? Just trying to get some ideas together.

I'm going to bet you can take the mouthpiece off the stock whip and it will fit some adapter you probably already have. If you got the balloon/whip attachment for the infinity, that might help, or about 8-10 pages back, I posted a cheapo adapter I got on eBay that works, sorry I'd go find the link but bedtime calls.
 

Mister G

Deceptively Old Fart
I don't know if anyone's ever done this with their Herbalizer, well, I'm sure someone has, nothing is original anymore...anyways, the other day I was grinding some fresh herbs where the stems weren't quite dried stiff so it comes out of the grinder bendy and fibrous (and a little powder coated :brow:).

I looked down at them and then looked at my Herbie. Hmm. I stuffed these stems into my mag bowl and fired her up at 445. The flavor was...not so bad! and I got about 2/3 the number of puffs I get from regular flowers, I was quite surprised to say the least. Came out the other side brittle and brown. Going to have to try that again. :evil:

You must pardon me, I must have the vapours.

electronic-cigarette-vapor.jpg
 
Last edited:
Top Bottom