Richaye
New Member
definitely not the button top, has to be the flat top. I don't know anything about the i2 charger, I picked up the D2 which was a few more dollars and has the voltage meter which is pretty handy
Can you link it?
Thanks
definitely not the button top, has to be the flat top. I don't know anything about the i2 charger, I picked up the D2 which was a few more dollars and has the voltage meter which is pretty handy
https://www.imrbatteries.com/nitecore-d2-digital-battery-charger/Can you link it?
Thanks
Hello, I was really happy with my Davinci IQ but after a while there come several Problems. First some parts fall apart like the magnet in the toplid. Or the metallcase around the flavour chamber which is simply glued on. The pearl from the silicon. But could still use the vaporizer. Now it is not possible to switch the device on. after install the battery it just vibrates and doesn't stop to vibrate until I remove the battery. Need a new RMA#
Sorry if my english isn't proper. I am a german customer
schreib ne email, mit Bilder, an customerservice@davincivaporizer.com oder geh zu deinem Händler, bei dem du den IQ gekauft hast.
in english: write an email,pictures included, to customerservice@davincivaporizer.com or go to your retailer where you purchased your IQ
Hello, I was really happy with my Davinci IQ but after a while there come several Problems. First some parts fall apart like the magnet in the toplid. Or the metallcase around the flavour chamber which is simply glued on. The pearl from the silicon. But could still use the vaporizer. Now it is not possible to switch the device on. after install the battery it just vibrates and doesn't stop to vibrate until I remove the battery. Need a new RMA#
Sorry if my english isn't proper. I am a german customer
but the fc responsible guy has to forward it to the CS, so why not directly!??You can PM @Davinci_vaporizer in this forum
but the fc responsible guy has to forward it to the CS, so why not directly!??
do both. Start with CS and submit your request and Davinci will give you a support request number. After that you can submit your pm to @Davinci_vaporizer with your case number along with the details of your problem. @Davinci_vaporizer can facilitate the speed of your service but its best to have the problems documented first with the CS route.but the fc responsible guy has to forward it to the CS, so why not directly!??
Exactly what I meant. Cheers for pointing out the error of my wayProbably cause you are looking at previously connected items. We are talking on the scan list.
Example, you buy a bluetooth headset and hit scan it will not be there. You put said headset in pair mode and it will appear. Once connected it will always show in connected items until you delete the connection.
The IQ and the Crafty use temporary connections so once disconnected or the app is closed the connection is terminated. The only difference is, as I already posted way after the quoted section, Davinci says you have to remove the battery to stop broadcasting bluetooth. The crafty turns off its bluetooth signal after 5 minutes and will not show up in a scan till you put it in pairing mode(tap power button).
This is not a giant issue as I just take battery out of IQ all the time now, since I know it is just wasting battery life in there, but a better design would have been to only have bluetooth on while the device is on or by putting it in a pairing mode.
i don't even use my iq any more nothing wrong with it i just been using my volcano a lot more curious has anybody found themselves using the device less and less over time ?
Modnote: Post edited to comply with forum rules
Wow, @KidKush91 and @BigJr48 , you guys are a serious buzz kill! Thanks for confirming my decision not to order one (that, and the fact that no one can discount it...).
was always wondering why you're on this forum 24/7 but dont use the vapeI'm a flavor chaser and my cravings couldn't be met, thankfully I had my Arizer Air to sustain the monkey on my back and just yesterday I received my Mystic Blue Solo 2 which made all my dreams come true....
No worries man , customer service may not be so great unless they have fixed that issue. I have not come around here in a bit bc after my 1st Rma and getting a new Iq replacement sent , it has been working great. I happen to really like mine and you can see in my Sig i have many vapes. Taste is great , swap-able batteries always a plus , it is easy to use , looks nice , feels nice and is the perfect size along with being a heavy hitter. I would not let the haters deter you from a purchase , everyone has there own opinions and while i was ready to give up the 1st time trying to send mine in i stuck it out and waited and i am glad i gave the device a 2nd chance bc i use it a few times a week and i am always happy with the outcome. As for coupons , i am sure you can find something , try puffitup , they usually always have some sort of coupon code.Wow, @KidKush91 and @BigJr48 , you guys are a serious buzz kill! Thanks for confirming my decision not to order one (that, and the fact that no one can discount it...).
@exime: How is your status regarding the RMA ? I got in contact with Davinci Support because my unit gets very hot and they told me that everything is ok. I also stated that I tried some things (different grind/material, different usage (smart/temp), with/out flavour chamber...) but they didn't help me as excpected. The material is evenly brown and without the flavour chamber the surface feels good to me.
I've no real clue if it's normal or not. For comparison I own a Storm Pen and a Pax2 and they don't even get that hot - it's clear that they are different devices.
Next thing I will try is switch to a LG HG2 and a Samsung Q30 - but the support said that this is proofen to be useless.
*sorry for any mistakes as I'm not a native speaker*
@exime: How is your status regarding the RMA ? I got in contact with Davinci Support because my unit gets very hot and they told me that everything is ok. I also stated that I tried some things (different grind/material, different usage (smart/temp), with/out flavour chamber...) but they didn't help me as excpected. The material is evenly brown and without the flavour chamber the surface feels good to me.
I've no real clue if it's normal or not. For comparison I own a Storm Pen and a Pax2 and they don't even get that hot - it's clear that they are different devices.
Next thing I will try is switch to a LG HG2 and a Samsung Q30 - but the support said that this is proofen to be useless.
*sorry for any mistakes as I'm not a native speaker*