The Advanced Telemetry Module by REFC Labs - The world's first advanced precision & multi-core capable desktop heater controller

[vapen00b]

Hey guys,


would this one work with an enano as well?
if so, what would I need to power a Collyland and the nano? Wouldn’t need to run them at once, but aiming for adapters/accs needed to get in the game with either unit.

Thank you kindly!

@pxl_jockey Great to see you back! I have always been enjoying reading your posts

 

[RedEyeFlightControl]

Hey guys,


would this one work with an enano as well?
if so, what would I need to power a Collyland and the nano? Wouldn’t need to run them at once, but aiming for adapters/accs needed to get in the game with either unit.

Thank you kindly!

@pxl_jockey Great to see you back! I have always been enjoying reading your posts

The E-Nano runs on 120v mains and is unfortunately not compatible with the ATM.

I just listed the adapters needed to use a Collyland product with the ATM - I've only got a few in stock but more on the way.

5.5x2.5mm Adapter

This adapter will correct the one-way interchange between a male 5.5x2.1mm (like those of the ATM and most desktop vapes) and a 5.5x2.5mm Female DC jack (like those on the Collyland products). A female 5.5x.2.5mm jack has a larger 2.5mm post and is not backwards compatible with 2.1mm socket in...

refc-labs.com

Listings for Prebuilt Simplex Modules are here. I'll be dropping a few here and there of various colors so be sure to check back often !

Advanced Telemetry Module - Prebuilt

THIS LISTING IS FOR A COMPLETE PRE-ASSEMBLED AND TESTED MODULE INCLUDING POWER BRICK AND HEATER INTERCONNECT CABLES Looking for the ATM shell kit? Please visit this page. To use your ATM with 5.5x2.5mm Female DC jacks like those on Collyland products, please see this adapter or this right angle...

refc-labs.com

I've had my eye on a nano XL, been wanting to try one.

 

[Shit Snacks]

I just listed the adapters needed to use a Collyland product with the ATM - I've only got a few in stock but more on the way.

5.5x2.5mm Adapter

This adapter will correct the one-way interchange between a male 5.5x2.1mm (like those of the ATM and most desktop vapes) and a 5.5x2.5mm Female DC jack (like those on the Collyland products). A female 5.5x.2.5mm jack has a larger 2.5mm post and is not backwards compatible with 2.1mm socket in...

refc-labs.com

Ah, I see they are already out of stock, can you maybe update the listing so we can pre-order? I mean pay all together, but you can wait to ship until the adapters come in...

Listings for Prebuilt Simplex Modules are here. I'll be dropping a few here and there of various colors so be sure to check back often !

Advanced Telemetry Module - Prebuilt

THIS LISTING IS FOR A COMPLETE PRE-ASSEMBLED AND TESTED MODULE INCLUDING POWER BRICK AND HEATER INTERCONNECT CABLES Looking for the ATM shell kit? Please visit this page. To use your ATM with 5.5x2.5mm Female DC jacks like those on Collyland products, please see this adapter or this right angle...

refc-labs.com

Yeah because I think I want to buy another ATM set up now then, in the blue, so I can have one in each room, since it really is much better than whatever else I have!

Does the full set come with the two right angle adapters as well? Like I have with my purple one, so if not I'd like to add that too with the colly adapter (wait to ship together)

 

[pxl_jockey]

Well that’s just swell @Shit Snacks here I was, just happy my ATM was en route. Blissfully ignorant, I hadn’t even considered how much better it would look on the desk with right angle adapters; get those wires right out of the way. No pun intended I was perfectly content for a moment, desiring nothing more, and then you come along…

They’re not hard to find or expensive but I don’t dare buy a couple now because what if they are included? I‘d have wasted 5 quid and have yet more electrical bits & bobs for the “Unused/Obsolete” box. But when the ATM does arrive and if the adapters aren’t included, I’ll be forced to wait 2-3 days with a less than ideal setup. I’m in the English countryside and nothing happens quickly here. Oh sure, the ATM will work just fine but those straight plugs and exposed cables will be mocking me all the while.

It’s a Kobayashi Maru scenario that I would have never needed to anguish over, had you not dropped that little knowledge bomb. Now I’m dealing with insomnia and probably gonna have to vape more just to cope with the added stress/anxiety of uncertainty over what to do. I lay the blame directly upon your doorstep, sir. Good day.

 

[4everpushingaboulder]

It’s a Kobayashi Maru scenario that I would have never needed to anguish over, had you not dropped that little knowledge bomb. Now I’m dealing with insomnia and probably gonna have to vape more just to cope with the added stress/anxiety of uncertainty over what to do. I lay the blame directly upon your doorstep, sir. Good day.

Well Kirk would just hack the @RedEyeFlightControl ordering system and add the required parts into the order…..

 

[RedEyeFlightControl]

Right angle and 5.5x2.5mm adapters are not included with the standard simplex package or kits. I have a bunch of stock inbound so I can offer them as a nice-to-have. I haven't listed the right angle adapters yet but they'll be up soon.

 

[Shit Snacks]

Right angle and 5.5x2.5mm adapters are not included with the standard simplex package or kits. I have a bunch of stock inbound so I can offer them as a nice-to-have. I haven't listed the right angle adapters yet but they'll be up soon.

Awesome man! Will you make it so we can add the incoming VB adapters to the order now as well? So I can place my order for those, the right angles, with the ATM order to pay now all together for shipping together when they're all in stock?? Thanks again!

 

[RedEyeFlightControl]

Awesome man! Will you make it so we can add the incoming VB adapters to the order now as well? So I can place my order for those, the right angles, with the ATM order to pay now all together for shipping together when they're all in stock?? Thanks again!

I'll have them added to stock as soon as I have them in hand (should be this afternoon). You'll be able to purchase individually. I can also add them to an existing order and you'll just receive an invoice for the difference. Either way, I can help out. If you want them added to a current order, shoot me a DM with your order # and the quantity and I'll add them for you.

Edit - 90 degree adapters are now in stock here -

90 Degree Elbow Adapter

Add a perfect 90 degree bend to your interconnects. Perfect for cable management or simply dressing things up. Priced each. These adapters feature a male 5.5x2.5mm tip.

refc-labs.com

 

[Shit Snacks]

Damn I don't know why I procrastinated so long not realizing when the blue went out of stock lol oh well I'll get another chance... Lucky I still have my purple atm of course!

 

[RedEyeFlightControl]

Damn I don't know why I procrastinated so long not realizing when the blue went out of stock lol oh well I'll get another chance... Lucky I still have my purple atm of course!

If you were referring to the blue prebuilt, it will get restocked this weekend, customer requested a black shell so I'm printing that now and building another. I'd be happy to let you know when I re-list that one. (This one is new filament which is a slightly brighter blue).

 

[Ramahs]

There are prebuilt units?

 

[Shit Snacks]

If you were referring to the blue prebuilt, it will get restocked this weekend, customer requested a black shell so I'm printing that now and building another. I'd be happy to let you know when I re-list that one. (This one is new filament which is a slightly brighter blue).

Oh okay then! Figured you would have more soon, but not this soon lol Thank you again!! I'm not so sure how I will feel about a slightly brighter blue, I came around on this blue because I realized it wasn't too bright haha

 

[RedEyeFlightControl]

There are prebuilt units?

I just started offering pre-built setups that include an assembled simplex, 24v 6a PSU, and at a heater interconnect. All you add is the heater (woodscents, HLT, vapbong, herbo, etc)

Those can be found here - https://refc-labs.com/products/advanced-telemetry-module-prebuilt

Oh okay then! Figured you would have more soon, but not this soon lol Thank you again!! I'm not so sure how I will feel about a slightly brighter blue, I came around on this blue because I realized it wasn't too bright haha

I can totally hook you up with one of the few remaining darker blue units. Not a problem whatsoever. If that's your jam I'll make it happen.

 

[Shit Snacks]

I can totally hook you up with one of the few remaining darker blue units. Not a problem whatsoever. If that's your jam I'll make it happen.

You are the absolute best! If I could see the two compared to each other, that would actually help me decide best, of course

 

[4everpushingaboulder]

You are the absolute best! If I could see the two compared to each other, that would actually help me decide best, of course

I’m sure the camera will distort the true shade.

I know @RedEyeFlightControl would love to pay you a personal visit with multiple samples to choose from? Be a shame if it clashed with all your vapes.

 

[Shit Snacks]

I’m sure the camera will distort the true shade.

I know @RedEyeFlightControl would love to pay you a personal visit with multiple samples to choose from? Be a shame if it clashed with all your vapes.

Haha I know, but if both of them are photo ed together, it would be both of them in the same shade lighting of the camera, so that would help me decide... I'm not even sure what may clash or not, I just know what I like, sometimes, when I see it!

 

[RedEyeFlightControl]

You are the absolute best! If I could see the two compared to each other, that would actually help me decide best, of course

https://imgur.com/a/ga6AqUf

I also moved to a new printing tech for the newer filament which eliminated the rough edge on the right side bevel (no more support). You can see one was printed at 45degrees.

If you're around the Rochester NY area, I can indeed pay you a visit

 

[Shit Snacks]

https://imgur.com/a/ga6AqUf

I also moved to a new printing tech for the newer filament which eliminated the rough edge on the right side bevel (no more support). You can see one was printed at 45degrees.

If you're around the Rochester NY area, I can indeed pay you a visit

Well I'll be damned, I actually love that lighter blue!! That's the one I shall snag (yes it will match some vapes lol) so I was able to decide from across the country after all!

 

[Grass Yes]

Well I'll be damned, I actually love that lighter blue!! That's the one I shall snag (yes it will match some vapes lol) so I was able to decide from across the country after all!

I have the dark blue and I love it, but boy howdy does that light blue print look crisp.

 

[pxl_jockey]

Well y’all, my ATM has landed but I haven’t been by pick it up yet, I have to get an MRI today and will hopefully get it then. The right angle adapters came in today so I am ready for set up & take off. Thanks, Red for everything!

 

[Shit Snacks]

No rush @RedEyeFlightControl I just wanted to follow up here since you said you would have the light blue listed last weekend I think? I'm not going to miss out so I've been anxiously waiting and checking though like I said not actually in any rush!

 

[pxl_jockey]

Okay ya’ll, it’s here! Tiny and beautiful but I’m so stupid I can’t figure out how to change the voltage out. Ive gone into the menu but with no documentation, I don’t want to fuck this up. I also don’t want to send 24.73V through my heaters. I feel so stupid since it seems to be plug & play for everyone else. Too frustrated to deal with it on a Saturday night.

 

[Shit Snacks]

Okay ya’ll, it’s here! Tiny and beautiful but I’m so stupid I can’t figure out how to change the voltage out. Ive gone into the menu but with no documentation, I don’t want to fuck this up. I also don’t want to send 24.73V through my heaters. I feel so stupid since it seems to be plug & play for everyone else. Too frustrated to deal with it on a Saturday night.

Yo! When it's on just press the set button, you will see it at the top highlighted, then push the dial knob (it is also a button which took me a while to realize) to move to the first value in the voltage reading. You push it again to move to the next value behind the decimal if you want. Turning the knob sets it instantly in real time, so when you find the setting you want just leave it... Does that make sense?? Red has a video here too

 

[RedEyeFlightControl]

This guide should get you going - just follow along

For a basic running voltage change, hit set, then click the knob in once. Once the volts are highlighted you can turn the knob. Each knob click changes the decimal places. Second knob click adjusts .1v increments and third adjusts by .01v increments. Next clicks move you to the current settings. Leave this at 5.1A. Once you have your desired voltage setting, you can hit set as needed to return home.

 

[pxl_jockey]

Yeah, I figured all that out and top number reads SET: 9.50 but the big green digits say 24.75 and plugging in a cold herbo Ti drops it to 19.xx and then it starts climbing and the herbo injector starts smelling and I yank it out. I feel better about my problem solving skills since I figured out how to set it correctly but I don’t know what I’m still doing wrong