Suggest me an affordable heavy hitting desktop? (Sticky brick vs competitors)

Finessseee

Finessseee

Well-Known Member
Been looking into the sticky brick, noisy cricket, dougs woodery, dreamwood, etc. which is the best to hook up to multiple 18MM bongs? I’m assuming all I’ll need is one of these and a torch. Any suggestions? Only other option would maybe be the Tinymight.
 
Last edited:
Finessseee,
Timps27

Timps27

Feel like I’m winnin’ when I’m losin’ again
REFC JetDryV is another option, unfortunately currently out of stock :(

refc-labs.com

JetDryV Gen3 Oven Module by REFC Labs

The JetDryV (prn. "Jet-Drive") is a high performance and ultra compact, artisan-crafted and precision-machined wood oven module, designed to crush advanced fluid dynamics into the smallest modular formfactor possible. Each unit is hand-crafted from a singular billet of hand-selected, responsibly...
refc-labs.com refc-labs.com
 
Finessseee

Finessseee

Well-Known Member
Timps27 said:
REFC JetDryV is another option, unfortunately currently out of stock :(

refc-labs.com

JetDryV Gen3 Oven Module by REFC Labs

The JetDryV (prn. "Jet-Drive") is a high performance and ultra compact, artisan-crafted and precision-machined wood oven module, designed to crush advanced fluid dynamics into the smallest modular formfactor possible. Each unit is hand-crafted from a singular billet of hand-selected, responsibly...
refc-labs.com refc-labs.com
Click to expand...

I actually just bought a bong off his website lol. I’m gonna look into this even tho they’re out of stock. Seems solid for the price!
 
Finessseee,
Finessseee

Finessseee

Well-Known Member
Hippie said:
The Oconnel Knotty Topper
The Lamart Piro
And the Elev8R ?
Click to expand...

Gonna check them out now. Elev8r looks like it rips but it also looks like a lot to have out all at once. I also have no clue what Elev8r attachments to buy in the cart options
 
Finessseee,
Timps27

Timps27

Feel like I’m winnin’ when I’m losin’ again
You need a good torch for the Elev8r; but other than that nothing. It takes a bit of experimenting to get “your” Elev8r and torch combo dialed in, but once you do it’s repeatable and hits very hard.
 
Finessseee

Finessseee

Well-Known Member
Timps27 said:
You need a good torch for the Elev8r; but other than that nothing. It takes a bit of experimenting to get “your” Elev8r and torch combo dialed in, but once you do it’s repeatable and hits very hard.
Click to expand...

I feel like if I get the Elev8r I’ll just get a temp dial. I just don’t know the best one to get for the cheapest price lol
 
Finessseee,
Chicken No Name

Chicken No Name

Dazed and confused
It doesn't help your choice but I happened to have 2 of the vapes you mentioned in hand so snapped a picture.
Gotta love artisan vapes

IMG-20220201-155445.jpg
 
Finessseee

Finessseee

Well-Known Member
Timps27 said:
You need a good torch for the Elev8r; but other than that nothing. It takes a bit of experimenting to get “your” Elev8r and torch combo dialed in, but once you do it’s repeatable and hits very hard.
Click to expand...

auber rdk300 or dc micro PID controller?
 
Finessseee,
Timps27

Timps27

Feel like I’m winnin’ when I’m losin’ again
If you are going to get a PID and coil my suggestion is to take some time with PID research as it can (and will IMO) be used for future vapes in your kit.

In general for electronic UI my opinion is that knobs are superior to buttons, YMMV.
 
Hippie

Hippie

Well-Known Member
Ohhh a coil you say :)
If you're thinking about a coil Elev8R setup I recommend you have a look at these 2 as well

DIY Ti DC Elev8r

I had an idea for a titanium DCE sort of concept and since I have no plans on building it I thought I'd share it right away. Parts: 1x Cannabis Hardware 18mm Male Post for ShovelHead Bowl 1x ½" rimmed basket screen 1x ¾" pipe screen formed to fit in the top of the post 1x 16mm e-nail coil 1x...
fuckcombustion.com

The Pinky: an open-source DIY injector style thermal extraction device

another DIY! https://420vapezone.com/pinky-diy-ball-vape/ And her alter ego. The Brain edited for gender !
fuckcombustion.com
I've not got a spare 16mm coil to build the Ti Flowerpot post one yet but I'd expect it to hit harder than the Elev8R if that's what you want
The Pinky does but it's a bit unstable

Or there's the Flowerpot and Qaromas
 
Finessseee

Finessseee

Well-Known Member
Timps27 said:
If you are going to get a PID and coil my suggestion is to take some time with PID research as it can (and will IMO) be used for future vapes in your kit.

In general for electronic UI my opinion is that knobs are superior to buttons, YMMV.
Click to expand...
Timps27 said:
If you are going to get a PID and coil my suggestion is to take some time with PID research as it can (and will IMO) be used for future vapes in your kit.

In general for electronic UI my opinion is that knobs are superior to buttons, YMMV.
Click to expand...

Gotcha! I think I’m gonna do my homework first, but what’s the best between glass / stainless & ruby / boro? How do I know which combo to buy.
 
Finessseee,
Chicken No Name

Chicken No Name

Dazed and confused
Dont have elev8r. Had to draw the line somewhere.
Have the flowerpot b1.
Whilst the tinymight is a pocket desktop, it won't keep up with a coil based system for flavour or power imo.
If you don't need portability I would look at the big hitters....
 
Cheebsy

Cheebsy

Microbe minion
Finessseee said:
Hmm what about the TinyMight compared to the DC-Elev8r?
Click to expand...
For many many months these 2 were my DDs except my elev8r is torch driven, not the DC version (don't even get me started on the name because the coil runs on AC lol!). The elev8r can extract 3 times the amount of flower in the same number of hits, Tastes fucking incredible, and slaps hard. Grab a torch version, it's super cheap, and get a coil later if you love it.

Now I hardly touch either since getting my inVersion, it's honestly the only vape I need and I never mind the short wait for it to heat up, even though it's a lot more than 12 seconds 😉🤣 what a blissful experience
 
Finessseee

Finessseee

Well-Known Member
Cheebsy said:
For many many months these 2 were my DDs except my elev8r is torch driven, not the DC version (don't even get me started on the name because the coil runs on AC lol!). The elev8r can extract 3 times the amount of flower in the same number of hits, Tastes fucking incredible, and slaps hard. Grab a torch version, it's super cheap, and get a coil later if you love it.

Now I hardly touch either since getting my inVersion, it's honestly the only vape I need and I never mind the short wait for it to heat up, even though it's a lot more than 12 seconds 😉🤣 what a blissful experience
Click to expand...

Could you link me the inversion?
 
Finessseee,
Vaporware

Vaporware

Well-Known Member
Finessseee said:
Could you link me the inversion?
Click to expand...

Phase3 Vaporizers

Figured I'd start this thread to facilitate discussion on a little something I've been working on. Many thanks to those who have already been following me along with this project, I really appreciate all the kind-hearted support, FC has always been an incredible place that many of us call home...
fuckcombustion.com

If you look way back in the FlowerPot thread, @invertedisdead was talking about a glass or quartz FP and about filling it with balls long before this whole wave of ball vapes came out, and his is still the one I’m most excited to try.

You can’t buy one today, but after a lot of hurdles it looks like they should be more available soon. Definitely high on my list, and I’m confident they’ll be better than FlowerPots apart from being more breakable and not having the ecosystem of accessories CH makes. :)

Edit: I would caution you again though, anything with a coil that you leave heated up and accessible to cats is a risk in your case.

If you can babysit it while it’s on that’s great, but if I don’t want you to come in and find a shattered quartz housing with balls burned into the floor everywhere and maybe a bad burn on a cat from knocking it over…they might notice and steer clear, but if they run into it while it’s on, knock it over or knock something flammable onto it…it could be bad.
 
Last edited:
Cannabiker

Cannabiker

Well-Known Member
Finessseee said:
Gotcha! I think I’m gonna do my homework first, but what’s the best between glass / stainless & ruby / boro? How do I know which combo to buy.
Click to expand...
I just ordered one last night, with the DC PID, and it's scheduled for a Friday delivery. I went with the stainless because it's supposed to be less restrictive without any real taste penalty, and I went with rubies, partly because they're supposed to have a better heating profile, but really because they look cool and they get darker as they get hotter for a visual indicator. I also got the basic, 19mm glass stand on Troy's recommendation.

Keep in mind this is my first DCE, I've never even seen one in person, so my choices are just based on what I've read or seen online in dozens of pages of FC discussion, lengthy Discord debates, and hours of reviews. I may be a little obsessive, but I think people here understand.
 
You must log in or register to reply here.
Top Bottom