Revolverre Glass store is OPEN !!!

[Ash]

I'd love a glass diffuser cup for the PD.

 

[AGBeer]

I'd love a glass diffuser cup for the PD.

I dont think that would work too well as glass doesnt conduct the heat enough or consistently enough to make it an effective diffuser cup.

 

[illadelph]

im glad to be a part of the evolution of clear dome glass. as soon as i get some more moneys ill be sure to get more pieces.

 

[BUZZHEAD]

hey cd, i really want one of those bubblers for my new pd. That looks great, keep up the great work.

 

[SkeletonLips]

Will the PD stems fit my WDZ? They look awesome! And that bubbler stem is off the chain, man.

 

[FEAR420]

Yes,PD Stems WILL fit the WDZ. They will not fit the MZ

 

[Clear_Dome]

Hey I just want to thanks you all , the stuff go fast and that's encouraging a lot ! I should ship the stuff today or tomorow , and list more stuff !

 

[FEAR420]

I bagged my inline this morning!! NOW HURRY UP & SHIP IT!!!!!

 

[Hanibal Lectin]

a Sherlock shaped stem with flat mouthpiece would be sweet!

 

[Yukon Cornelius]

Those glass PD stems were a great idea. I'm gonna have to look into one eventually.

This might sound a little farfetched but could you make an all glass PD stem? I realize the bowl is tiny as hell, but I don't really know anything about glassblowing, so it might be possible. Not sure how the metal on glass would go, or if you could even make a glass screen small enough to make it functional.

Keep up the good work! You might wanna look into making some bell curves as well. They're definitely in right now.

 

[Clear_Dome]

Hi yukon cornelius ,
I have tried to make some full glass pd stem but it just dont work as well as the orginial stem , it is not as efficient so I was feeling bad to sell all glass stem for more $ than the original stem if it was not working as good . Trust me , the glass/stainless steel combo is the best and work really well , even better the stock stem if you ask me (I can wait to get feedback of my stem) . also all my stems will go with a screen pack so you will be able to change the screen when it is dirty (THANKS TOM )

I will list some bended stems and some headier stem with reversal on it today so keep your eyes open ! those are really killer .

Just a lil update on the Extreme accesories , as Rockwise seem to lowball my stuff and dont seem to understand that there is some different quality in glass , I will probably wont sell my stuff via his internet site , so you should see some tight elbows , short bowls , mouthpieces , and water pipe connectors really soon on my etsy .

Also for the peoples who already bought some stuff , I will ship it 2d and will email all of you just to confirm !

Thanks a lot

Alex

 

[FEAR420]

Also for the peoples who already bought some stuff , I will ship it 2d and will email all of you just to confirm !

Thanks a lot

Alex

YAY!!!!! My babies are comin' home to daddy!!!!!

 

[hereatlast]

Hi yukon cornelius ,

Just a lil update on the Extreme accesories , as Rockwise seem to lowball my stuff and dont seem to understand that there is some different quality in glass , I will probably wont sell my stuff via his internet site , so you should see some tight elbows , short bowls , mouthpieces , and water pipe connectors really soon on my etsy .

Thanks a lot

Alex

Thats too bad but as long as they're available somewhere! I can't wait to get a new elbow, just broke another and I'd love a thicker, more personal piece of glass.

CD, will the elbow pieces be compatible with the stock cyclone bowls or are you making new 'cyclone' bowls for the Extreme as well? Either way, the Extreme is a great unit and I think this may be the most logical upgrade for a lot of users...

 

[EitherOr]

Very cool, those stems look interesting, cant wait to see some User reports and feedback!

I dont think it has been asked... CD Is there a reason your stems are longer than the 'standard' stem size? Standard being whatever length the regular PD stems are. Personally, with the glass stem being longer I am wondering about breakage or wear and tear on the glass/steel joint area.

I just wondered if a shorter stem was possible, or if it just has to be the longer length for successful and consistent production.

 

[SpiralArchitect]

Looking pretty dope CD.
I saw all the items before they sold out.

Nice work, you are really progressing!

 

[minnesnowta]

Heady glass pd stems. I hope I catch when you throw them up. I may have to snag one. Execially if there's any purple on any of em. I wanna see some more inlines on there too I still am in need!!

Edit: they're up now. I swooped on one of the heady stems before I posted. The one I got looks siiiiick. Can't wait to see it in person. Finaly gonna have some clear dome glass now

 

[Clear_Dome]

Hi yukon cornelius ,

Just a lil update on the Extreme accesories , as Rockwise seem to lowball my stuff and dont seem to understand that there is some different quality in glass , I will probably wont sell my stuff via his internet site , so you should see some tight elbows , short bowls , mouthpieces , and water pipe connectors really soon on my etsy .

Thanks a lot

Alex

Thats too bad but as long as they're available somewhere! I can't wait to get a new elbow, just broke another and I'd love a thicker, more personal piece of glass.

CD, will the elbow pieces be compatible with the stock cyclone bowls or are you making new 'cyclone' bowls for the Extreme as well? Either way, the Extreme is a great unit and I think this may be the most logical upgrade for a lot of users...

Yep my Elbow fit the stock cyclone bowl for sure , for now I have only one list ''the heady one'' I will list more next week , the gong are finaly around (I think the box is at toronto right now) so I will list some less esxpensive one soon

Very cool, those stems look interesting, cant wait to see some User reports and feedback!

I dont think it has been asked... CD Is there a reason your stems are longer than the 'standard' stem size? Standard being whatever length the regular PD stems are. Personally, with the glass stem being longer I am wondering about breakage or wear and tear on the glass/steel joint area.

I just wondered if a shorter stem was possible, or if it just has to be the longer length for successful and consistent production.

Humm I can make some short one on request , I love them longer cause a it gave the time to the vapor to cool down so no need to use any plastic hose (like some did on the stock stem) , I realy love mine that size ! also borosilicate is pretty tuff and the tubing I use for the stem is 2.5mm thick I thick so that's pretty thick for a small tube like that

Heady glass pd stems. I hope I catch when you throw them up. I may have to snag one. Execially if there's any purple on any of em. I wanna see some more inlines on there too I still am in need!!

Edit: they're up now. I swooped on one of the heady stems before I posted. The one I got looks siiiiick. Can't wait to see it in person. Finaly gonna have some clear dome glass now

is it you that grab the red with and orange reversal one ? dude you'll love it for sure , the 2 reversal stem are really nice ! you wont be desapointed !! as for the inline bub I have an other almsot ready that just need to get a gong on it , and I will make more next week to always have a couple of them on my etsy list

 

[momofthegoons]

Wow CD, your work is really getting good. Just looked at the new stuff you listed and was very impressed. I have a funny feeling that I could be buying more accessories for my PD that I wont get until summer some time. I'll be so geeked by the time it comes that I'll be like a kid at Christmas with all my cool accessories. I just love the new bent stems and the one with the reversal made me think I should have waited to order. Oh well, just have to buy more!

Where's mom? Oh, she's in the vape cave.

 

[FEAR420]

Snagged that funky purple Heady Elbow....It was just SCREAMING,BUY ME JUSTIN BUY ME!!

 

[Lo]

Nice Justin!! Can't wait to hear your report on it

I snagged a couple PD stems but now the fancy ones are beckoning me!! I did say the next things I'd start collecting needed to have some glass LOL! I am sure I'll end up with more CD glass.

Hey Clear, any plans for SSV upcoming by chance? I have only a plain mouthpiece for my new SSV

 

[FEAR420]

Nice Justin!! Can't wait to hear your report on it

I snagged a couple PD stems but now the fancy ones are beckoning me!! I did say the next things I'd start collecting needed to have some glass LOL! I am sure I'll end up with more CD glass.

Hey Clear, any plans for SSV upcoming by chance? I have only a plain mouthpiece for my new SSV

Oh expect quite a few reviews in the next coming weeks.Ive changed my review technique to a minimum of 2 weeks ownership & usage,with a roll-up/overall at the end

As far as I know,he said he would do SSV knobs & such

 

[Konrad_Zuse]

Hey man just wanted to say I checked out your ETSY and I loved the e accessories you made. Too bad it was sold today, but I'm very excited to see some more . I'll hopefully be grabbing an E set sometime. You do custom requests too right? All the best, and congrats on coming this far.

Much love,

~FC Konrad

 

[lwien]

Wow, CD. Your stuff keeps getting better and better. Love the new PD stems.

 

[sour]

Clear Dome keep up the good work man! Very exciting stuff!

 

[minnesnowta]

Yeah CD that was me that got that heady stem. As soon as you said that I had to grab one. And that's what I wanted to hear about the inlines. I'm gonna be lookin for a bubbler soon.

Have you ever tried gridding an inline yet?