OKcomputer
Kid A
I know next to nothing about glass. Can this AI Showerhead Vapor Rig be used with herb, or is it JUST for concentrates? If it works with both, how do you think it will perform with the HI using an all-glass turbo tube?
Question about AI Showerhead Vapor Rig
- Thread starter OKcomputer
- Start date
OKcomputer
Kid A
Thanks for the quick reply Stu. Anyone happen to know of a similarly-priced, stylish-looking bubbler that will work with vapor?
treecityrnd
Active Member
I've got a female-female 18mm adapt that would work with that piece. I picked it up at a LHS a long time ago to make some alterations with my 7th Floor setup. PM sent.
WatTyler
Revolting Peasant
I've also been looking at bubblers for a while now. I think you're after American glass really? It's not a fashionable brand around here, but I can say that the Black Leaf Saxo Bubbler on Grasscity works pretty well as a budget option ($100), and IMO should challenge some opinions on budget glass. I recently bought one without having particularly high expectations, but I'm pleasantly surprised.
I'm much happier with the overall quality of this piece than I am a USA made piece of the same price which I bought at the same time, though admittedly it's not the most 'elegant' of mouthpiece tubes stuck on. It's much more volume than this piece you're looking at though, and possibly even slightly more than the other piece you were referring to in the classifieds. They do other models in the range, but obviously I can't speak for how well they work. I wanted to get a video of the bubbles stacking high like they could, but I cleaned it and changed the water and it doesn't stack as high as the manky old water did lol lord knows how many days old it was. I'll get another when this water goes old haha video here. I also posted these before in the customised thread- this video and this video
It's pretty good value anyway at around $100. If you wanted to save a couple of dollars and wait a few more weeks they'll probably have 20-30% off in their April sale.
I'm much happier with the overall quality of this piece than I am a USA made piece of the same price which I bought at the same time, though admittedly it's not the most 'elegant' of mouthpiece tubes stuck on. It's much more volume than this piece you're looking at though, and possibly even slightly more than the other piece you were referring to in the classifieds. They do other models in the range, but obviously I can't speak for how well they work. I wanted to get a video of the bubbles stacking high like they could, but I cleaned it and changed the water and it doesn't stack as high as the manky old water did lol lord knows how many days old it was. I'll get another when this water goes old haha video here. I also posted these before in the customised thread- this video and this video
It's pretty good value anyway at around $100. If you wanted to save a couple of dollars and wait a few more weeks they'll probably have 20-30% off in their April sale.
Chance2Vape
VapulatrixonifierDlx
OKcomputer said:
Here's a similar one made by VaporBrothers specifically for vapor.
http://www.vaporwarehouse.com/hydrator-clear-vaporbrothers.html
Looks very similar to the one you originally posted too.
Chance2Vape
VapulatrixonifierDlx
Stu said:That one would work just fine IMO..... if it weren't for the fact that it requires a VB and whip (sold separately) to work properly.Chance2Vape said:
Touche'
Hey STU what type of glass is that in your pic?? cost? (if you don't mind my askin')
Frederick McGuire
Aggressively Loungey
From looking at Stu's sig, I'd guess it's a Ben Wilson inline.Chance2Vape said:Stu said:That one would work just fine IMO..... if it weren't for the fact that it requires a VB and whip (sold separately) to work properly.Chance2Vape said:
Touche'
Here's one on ALT that looks similar for $250 + shipping
http://www.aqualabtechnologies.com/...lson-clear-mini-triple-donut-inline-tube.html
Chance2Vape
VapulatrixonifierDlx
Frederick McGuire said:From looking at Stu's sig, I'd guess it's a Ben Wilson inline.Chance2Vape said:Stu said:That one would work just fine IMO..... if it weren't for the fact that it requires a VB and whip (sold separately) to work properly.
Touche'
Here's one on ALT that looks similar for $250 + shipping
http://www.aqualabtechnologies.com/...lson-clear-mini-triple-donut-inline-tube.html
Thanks! Sweet piece!
How do you like the way it hits w/Vapor Stu? Would you recommend it say for a Solo, HA and future HI owner as a primary HydroVape/VapeBonging piece?
The BW inline is perfect for use with desktop whip units that can be connected via silicone tubing and 18mm adapter. I use my EQ and Vapolution exclusively through my inline bong. Very little volume promotes quick, thick vapor that you can see coming your way like a wall and makes it easy to determine how big of a hit you want.
For vaporizers that connect directly to the bong (Vapocane, Solo, HA, HI, Gnome, log vapes, etc...) I prefer to use my bubbler as the BW inline's bowl sits too close for comfort to the top of the tube. It's just a little awkward and I find that a bubbler works much better for me with those types of vapes.
YMMV
For vaporizers that connect directly to the bong (Vapocane, Solo, HA, HI, Gnome, log vapes, etc...) I prefer to use my bubbler as the BW inline's bowl sits too close for comfort to the top of the tube. It's just a little awkward and I find that a bubbler works much better for me with those types of vapes.
YMMV
Chance2Vape
VapulatrixonifierDlx
Stu said:The BW inline is perfect for use with desktop whip units that can be connected via silicone tubing and 18mm adapter. I use my EQ and Vapolution exclusively through my inline bong. Very little volume promotes quick, thick vapor that you can see coming your way like a wall and makes it easy to determine how big of a hit you want.
For vaporizers that connect directly to the bong (Vapocane, Solo, HA, HI, Gnome, log vapes, etc...) I prefer to use my bubbler as the BW inline's bowl sits too close for comfort to the top of the tube. It's just a little awkward and I find that a bubbler works much better for me with those types of vapes.
YMMV
Thanks for the great info Stu, I really love the look of it and have never had the pleasure of trying one, sounds like it'd make a great secondary piece for me! It or one similar from another maker perhaps.