Discontinued Pinnacle Pro

S

Smokey Da Bear

Active Member
sacredtruths said:
Looks like the PONG for the pinnacle pro is available for sale on vapor blunts website ;)
Click to expand...
Do you mean the new glass one? I can't seen to find it on there site but I did seen a concentrate glass mouth pice for the vaporblunt 2.0. Since I need to buy a new mouth/pong adapter and I live in NJ and I'm ordering from vapornation.com It would be nice if vapornation would send thevaporblunt.com the plastic pices for replacement for the glass ones since both companies are like next to each other in California it just sucks ordering then receiving it in a week to resend it back to cali for a few more weeks. It would save vapornation shipping cost since it's free shipping. Sorry for the confusion but I have $30 in credit to spend at vapornation.com instead of just doing it directly threw thevaporblunt.com
 
Smokey Da Bear,
MileHighLife

MileHighLife

Blower of glass, grower of grass
VAPEHUNTER said:
Hey @MileHighLife, I finally got around to picking up the "fast tech Quidian power bank" and it gives me the option to set the Volts. I remember reading that the PnP needs slightly more than 5.0 Volts when using while charging. Do you set your Volts to 5.0 or 5.5? Thanks in advance.
Click to expand...
I set it to 5.0 volts.
 
Ratm22

Ratm22

Cloud Transcender
VAPEHUNTER said:
Hey @MileHighLife, I finally got around to picking up the "fast tech Quidian power bank" and it gives me the option to set the Volts. I remember reading that the PnP needs slightly more than 5.0 Volts when using while charging. Do you set your Volts to 5.0 or 5.5? Thanks in advance.
Click to expand...
My old computer ATX power supply comes in at 5.1v and the pinnacle seems to like it. It will even heat up while plugged in.
 
M

Mutemath

Active Member
photo1_zpsfee21c9c.jpg

Not safe to use it anymore right?
 
M

Mutemath

Active Member
Smokey Da Bear said:
I would say NOT...what temp do u use? Either way it wouldn't even matter because that should of not happen if u on lv.5 SMH danm I can't wait for the new glass one
Click to expand...
Mainly at 2 but never past 3, I ordered a new PonG so it'll hold me over when I send this one and the MP for the glass replacement. Wanted to use the WT tonight but I guess I can't :/
Edit- Is an iso soak gonna clean it well enough to ship it?
 
Mutemath,
S

Smokey Da Bear

Active Member
Mutemath said:
Mainly at 2 but never past 3, I ordered a new PonG so it'll hold me over when I send this one and the MP for the glass replacement. Wanted to use the WT tonight but I guess I can't :/
Edit- Is an iso soak gonna clean it well enough to ship it?
Click to expand...
Is not good for plastic since it tends to dry plastic out after time but to me there's nothing better then iso so I use it with a Q-tip and then I hurry up and rinse with water but I let the bullet and screens sit in a bowl with iso and salt works wonders lol then again with a Q-tip for the inside of the PNP then dry it with the other side of the Q-tip then I turn it on to 3 and let the iso smell burn out. Don't want my flowers smelling like iso lol
 
Quetzalcoatl

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Smokey Da Bear said:
Is not good for plastic since it tends to dry plastic out after time but to me there's nothing better then iso so I use it with a Q-tip and then I hurry up and rinse with water but I let the bullet and screens sit in a bowl with iso and salt works wonders lol then again with a Q-tip for the inside of the PNP then dry it with the other side of the Q-tip then I turn it on to 3 and let the iso smell burn out. Don't want my flowers smelling like iso lol
Click to expand...
I like drawing up some hot water in the sink and filling a ziplock with a bit of ISO, throw what I want to clean in there and close the bag (with air so the stuff can shake around inside easily) and let it float in the hot water for a bit. The plastic is thin enough to let the ISO warm up from the hot water and it really helps speed up how fast the resin breaks down into the alcohol. Then I can just dump it and wash my stuff up.
 
Burnttoast22

Burnttoast22

Eats your cake in front of you
4lBYm66.jpg


It says input from 100v up to 240v could I just use a two to three pin adapter to the mains without blowing it up instead of plugging it into my UK-US stepdown transformer
 
Mr Mellish

Mr Mellish

Well-Known Member
Hi all,

Dumb question from Mr Mellish time again. Finally got my PnP back from the friend who has had it almost since I got it...think I tried it 3x before I handed it off.

Today I took the heretofore unknown step of looking at the manual. It shows the temperature for each setting, which seems useful.

Comparing the temps to the data here:
http://www.braatah.com/vaporizer-temperature-chart/

It seems that the lowest temp is well above the temps for THC. How volatile are these compounds? Will the THC be wrapped up in the other goodies obtained at 370 or is it already beginning to dissipate by the time it hits 370?
 
Mr Mellish,
S

spicylambshanks

New Member
Mr Mellish said:
Hi all,

Dumb question from Mr Mellish time again. Finally got my PnP back from the friend who has had it almost since I got it...think I tried it 3x before I handed it off.

Today I took the heretofore unknown step of looking at the manual. It shows the temperature for each setting, which seems useful.

Comparing the temps to the data here:
http://www.braatah.com/vaporizer-temperature-chart/

It seems that the lowest temp is well above the temps for THC. How volatile are these compounds? Will the THC be wrapped up in the other goodies obtained at 370 or is it already beginning to dissipate by the time it hits 370?
Click to expand...

If you heat your herb to a temperature higher than that listed for each compound, you will benefit from the properties listed for those temperatures and below. So, if you set your temperature at level 1 (370F), you will experience the effects of everything except CBC from that link.
 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
As of today VB hasn't included the mouthpiece on the website. I hope they include it soon. I've already gotten the gong that needs the nipple that's cut out at the top for stability, thank you BarnBoy for that. I don't want to send another mouthpiece or gong in and get another one of the same glass gongs that are so unstable.

I notice VB hasn't been posting on this thread lately. I think these companies set themselves up for failure, when they promise too much and cannot fulfill that promise when they post on sites like FC. Some promote their products and when everything doesn't go as planned may feel uncomfortable appearing on the thread. Possibly once a fix is implemented and they have sold another 1000 units with fewer flaws will feel comfortable posting again, or maybe not.

It's so important for these companies to have good after care when selling these health related products such as vaporizers. :leaf::peace:
 
Last edited:
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
SiDankies said:
Really wish the PNP had a faster heat up time.. the thing kills me some times when im trying to vape with friends and it takes 5 mins just to get to temp 2
Click to expand...
Sounds like a battery problem or the heater possibly? The unit doesn't normally take that long to heat up.
 
Last edited:
rshetts

rshetts

Well-Known Member
Mine takes 2-3 minutes to heat up to level 2 . If its really taking 5 theres likely something wrong
 
rshetts,
U

UnderMist

Technically its vapor but UnderVape sounded weird
Reading through, still haven't figured this out. So is there an official gong out yet? Or have people not received them?

That 3D printed shroud is awesome. Never would have imagined someone with a 3D printer coming along and making something like that for the PnP.

My PnP has been in cold storage (fancy way of saying its been sitting in the closet lol) for a few months since I have been avoiding vaping in general and the battery was fully charged when I left it there. Does anyone think there would be an issue with the battery?
 
UnderMist,
  • Like
Reactions: $unnyblaq
lookhigh

lookhigh

FC member
There are replacement GONGs available but its best to wait for the engineer glass lined one.
Battery should be fine once it was fully charged.
 
lookhigh,
herbivore21

herbivore21

Well-Known Member
Jesus Christ! Look at that broken PNP! Did this happen through normal usage, or did you put leave the top of your pnp resting on the stove @Lizard King ? Out of interest, how long had you owned the PNP before the main housing at the top started breaking like that?

Glad to have gotten off the PNP train well before anything that terrible happened to mine!
 
You must log in or register to reply here.
Top Bottom