Discontinued Pinnacle Pro
- Thread starter stickstones
- Start date
Sativape
Well-Known Member
@oli,
I use bubble hash with my PNP all the time.
I mix mine with my bud.
I have also rolled up bubble hash in a thin layer of degummed hemp fibre (or organic cotton) and slid it into the bullet.
I have never had luck with my FMJ, and neither have my friends.
Here is my post regarding from the PN OG that might help you:
The Pinnacle by Vaporblunt
I also placed a chunk of my super concentrate inside this screen, squished the screen into a smaller diameter, then dropped it into my bullet.
This screen allows air to pass the bullet in order to vape the product, and it also keeps the PNP chamber and MP/Pong clean.
I need to grab some more of these when I get a chance:
@BarnBoy,
You might want to consider making some edibles until your PNP is back?
I do enjoy edibles, but I find that I get a little bit too lethargic for a lengthy period.
Last edited:
Mr Mellish
Well-Known Member
Thanks, @CarolKing. I read through all that stuff when I did not have a PnP and it was meaningless. I'll have to give it another go.
However, you gave me an idea. A trip to Home Depot for some 5/8" tubing and the #2 setting is much more tolerable. I haven't played around with lengths yet but my initial effort with a 4" piece was much better.
Unfortunately, the pong seems to not stay on as well as the mouthpiece does, so I may have to locate the post(s) about the baby bottle nipple MacGruber.
oli
Well-Known Member
@oli,
I use bubble hash with my PNP all the time.
I mix mine with my bud.
I have also rolled up bubble hash in a thin layer of degummed hemp fibre (or organic cotton) and slid it into the bullet.
I have never had luck with my FMJ, and neither have my friends.
Here is my post regarding from the PN OG that might help you:
The Pinnacle by Vaporblunt
I also placed a chunk of my super concentrate inside this screen, squished the screen into a smaller diameter, then dropped it into my bullet.
This screen allows air to pass the bullet in order to vape the product, and it also keeps the PNP chamber and MP/Pong clean.
I need to grab some more of these when I get a chance:
@BarnBoy,
You might want to consider making some edibles until your PNP is back?
I do enjoy edibles, but I find that I get a little bit too lethargic for a lengthy period.
Thanks for the answer but FMJ ???
Fantastic Marijuana?
Fun Marijuana?
Fuck Marijuana?
oli
Well-Known Member
Cool thanks I could have been searching for ever....
Really starting to like the look of this device, the more I do my research, just had a look at this vid from Vapelife
Massive clouds or what, although I know he likes it hot, too hot for my liking though
CarolKing
Singer of songs and a vapor connoisseur
So BarnBoy, since you bought your Pnp from theyoyokid1 they are fixing your unit? They are willing to fix the crack in the sleeve? It's better to buy from them than VaporBlunt because they actually stand behind what they sell. Is that what I'm hearing?
There are no costs involved?
Good luck and keep us posted.
There are no costs involved?
Good luck and keep us posted.
Last edited:
BarnBoy
Reformed Combustor
All- I will address each question, but only after I know WTF is going to happen and I have my/a unit back in my hands. Sorry, a bit grumpy with out it....
As of now, you all know just as much as I do; REALLY!
Cost so far was $10 to ship the unit to @theyoyokid1 via UPS (he has a business account with them so even cheaper than USPS registered!). I will gladly pay him to expedite the shipping back to me... (Yes, pining for the PNP!)
@Lizard King - I'll leave that TBD by reader...
To be continued...
-BB
As of now, you all know just as much as I do; REALLY!
Cost so far was $10 to ship the unit to @theyoyokid1 via UPS (he has a business account with them so even cheaper than USPS registered!). I will gladly pay him to expedite the shipping back to me... (Yes, pining for the PNP!)
@Lizard King - I'll leave that TBD by reader...
To be continued...
-BB
Vape Dr.
Well-Known Member
All- I will address each question, but only after I know WTF is going to happen and I have my/a unit back in my hands. Sorry, a bit grumpy with out it....
As of now, you all know just as much as I do; REALLY!
Cost so far was $10 to ship the unit to @theyoyokid1 via UPS (he has a business account with them so even cheaper than USPS registered!). I will gladly pay him to expedite the shipping back to me... (Yes, pining for the PNP!)
@Lizard King - I'll leave that TBD by reader...
To be continued...
-BB
BB! did you see theyoyokid1 joined FC yesterday! Hes a super guy on Ebay, glad he's on FC now!
Vape Dr.
Well-Known Member
Lol, You probably knew before I did!
He is a great guy.
I'm glad he joined FC I'm sure we'll see a whole bunch of new mods for the PnP between the 2 of you!
El Exigente
New Member
@El Exigente,
Have you every considered investing in a bubbler?
I have a couple of bubblers that I only use with mini ice cubes only. No water.
It helps cools the vapor down, and does not take away from the vapor flavor as I find the water does.
I find that go through less material now.
I use these mini ice cube trays:
I have not used a Bubbler, which one do you recommend? And the ice cube trays have already been ordered from Big River.
Vape Dr.
Well-Known Member
@El Exigente, do you have a link from where you purchased the mini ice cube trays?I have not used a Bubbler, which one do you recommend? And the ice cube trays have already been ordered from Big River.
I picked one up from a church rummage sale a year or so back and can't find them anywhere! They are super convenient!.
Thanks!
Last edited:
El Exigente
New Member
Wow that's quite an elaborate outfit you have there.
So, it's OK to turn the PnP upside down? That's good to know.
Sativape
Well-Known Member
I have not used a Bubbler, which one do you recommend? And the ice cube trays have already been ordered from Big River.
@El Exigente,
You'll need to get a bubbler with enough space between the down stem and the bubbler wall, and also a wide mouth to allow the ice to go into the bubbler.
Here's my set up.
I got a dirt cheap bubbler for $30 from my friend.
Please note that the PNP glass gong pongs are 14mm.
BarnBoy
Reformed Combustor
All – I got word from @theyoyokid1 that to cover his costs (shipping, parts & labor) he would like to have these types of repairs cost $20. I’m not sure if this covers non-USA customers and /or non-customers alike. But the guy is actually taking them apart and replacing the collars or “tops” as he calls them. You will get your same unit back! And $20 is nothing if you actually try to consider labor in something like this. So please do not welcome the boy to the forum with your complaints. Well Yoyokid got my unit today, fixed it and has it all packaged and ready for the USPS tomorrow w/ tracking number. I could get this by Saturday if the planets align…
And as an extra bonus because of the rumors of him having the Engineering PGonG I tossed in a PonG for exchange, just in case. So when I get my rebuilt beauty back, I will be sucking on one of these…
Love and vapors to all!
-BB
PS @Vape Dr. - I think @Sativape had those mini-ice-cube trays...
I think they are called cocktail ice cubes... (saw them at Bed, Bath and Beyond)
EDIT @Mr Mellish - Look at the photo above as to how Sativape used a glove thumb to secure his PonG...
And as an extra bonus because of the rumors of him having the Engineering PGonG I tossed in a PonG for exchange, just in case. So when I get my rebuilt beauty back, I will be sucking on one of these…
Love and vapors to all!
-BB
PS @Vape Dr. - I think @Sativape had those mini-ice-cube trays...
I think they are called cocktail ice cubes... (saw them at Bed, Bath and Beyond)
EDIT @Mr Mellish - Look at the photo above as to how Sativape used a glove thumb to secure his PonG...
Last edited:
Sativape
Well-Known Member
All – I got word from @theyoyokid1 that to cover his costs (shipping, parts & labor) he would like to have these types of repairs cost $20. I’m not sure if this covers non-USA customers and /or non-customers alike. But the guy is actually taking them apart and replacing the collars or “tops” as he calls them. You will get your same unit back! And $20 is nothing if you actually try to consider labor in something like this. So please do not welcome the boy to the forum with your complaints. Well Yoyokid got my unit today, fixed it and has it all packaged and ready for the USPS tomorrow w/ tracking number. I could get this by Saturday if the planets align…
And as an extra bonus because of the rumors of him having the Engineering PGonG I tossed in a PonG for exchange, just in case. So when I get my rebuilt beauty back, I will be sucking on one of these…
Love and vapors to all!
-BB
PS @Vape Dr. - I think @Sativape had those mini-ice-cube trays...
I think they are called cocktail ice cubes... (saw them at Bed, Bath and Beyond)
EDIT @Mr Mellish - Look at the photo above as to how Sativape used a glove thumb to secure his PonG...
@BarnBoy
Once again buddy.... thanks for sharing!
Nice pic! BB is the man!
I'm very curious to see if the new "top" will have a design change or replaced with an identical piece that will be prone to cracks again... hmmm.
Mr Mellish
Well-Known Member
BarnBoy
Reformed Combustor
FWIIW - The photo is from @theyoyokid1. I will post more once in my hands... (but thanks!)
Sativape and his glove thumb was the true inspiration for the BB-Nipple with the TRVB or Epic GonG...
More to come...
Reminder, the contest will be closing this Friday at midnight (Saturday morning). Don't forget to cast your votes!!!!
-BB
Krizzle
Hi Very high
@TromaRon Thanks dude!
Wooot! Just ordered one of the PonG's on ebay from @theyoyokid1
should have it next week, he's really quick even with international stuff.
Wooot! Just ordered one of the PonG's on ebay from @theyoyokid1
should have it next week, he's really quick even with international stuff.
Burnttoast22
Eats your cake in front of you
This is all really great stuff people, the new glass pong looks amazing and we are finally able to get repairs for the faulty units. Outstanding!
For those that don't want/have the WT here's my take on an extended glass mouthpiece.
Method.
Purchase 8cm long 8mm OD glass tube from ebay. (costs about a fiver)
Cut Pong neck in half
Remove gauze/screen
Sand or drill out whats left of the pong so that the glass tube fits SNUGLY.
fit gauze over end of glass and push glass into the pong from the top end. If it's too tight sand out some more plastic from the inside
once it's in there you can use a little bit of superglue on the outside of the glass to fix it in place.
Lastly get some sugru and carefully wrap it around the outside of the pong where the glass attaches for a nice neat finish.
Done.
I can now do a full bullet at 3 without the watertool and it's lovely and cool, slightly better flavour as well over the standard pong.
For those that don't want/have the WT here's my take on an extended glass mouthpiece.
Method.
Purchase 8cm long 8mm OD glass tube from ebay. (costs about a fiver)
Cut Pong neck in half
Remove gauze/screen
Sand or drill out whats left of the pong so that the glass tube fits SNUGLY.
fit gauze over end of glass and push glass into the pong from the top end. If it's too tight sand out some more plastic from the inside
once it's in there you can use a little bit of superglue on the outside of the glass to fix it in place.
Lastly get some sugru and carefully wrap it around the outside of the pong where the glass attaches for a nice neat finish.
Done.
I can now do a full bullet at 3 without the watertool and it's lovely and cool, slightly better flavour as well over the standard pong.
Last edited:
sacredtruths
Member
Hey the glass lined pong looks neat!
MuushuPork
Well-Known Member
So since I never sent my old PonG in can I do so now and get the new GonG?
EDIT: Nevermind, I just bouaght from yoyokid. Never dealt with him before but $20 is worth it not to deal with TRVB. Will keep posted on its functionality.
EDIT: Nevermind, I just bouaght from yoyokid. Never dealt with him before but $20 is worth it not to deal with TRVB. Will keep posted on its functionality.
Last edited: