Phase3 Vaporizers

[Alligator427]

I did my preorder. I hope ZXL will be not cancel
Payement was easy that is a good thing. I have a lot of problem since 3-4 weeks because of an order in Netherland. My bank ask me a lot of questions, block the transfer. I have currently to fight to recover my money. France get worse and worse. Big brother is watching you ....

 

[invertedisdead]

Howdy friends quick lil update -

ZX's should be due in near the end of the month. Can't wait to get these out to everyone waiting! Ceramics and custom coils are in production right now.

ZXL's will 100% be coming; at least this small batch of them. I will be putting the order in soon, they will be coming in later than the ZX's.
I would not lag around too long on grabbing one for anyone who has been waiting for ZXLs to come up for sale again.

ZXXL replacement handles are being produced for testing and if confirmed those will be produced and sent out with all the ZXXLs.
I really apologize for the additional delays but my ceramic MFG does not want to replace these $$$$ parts for me until this new sample is confirmed. That said I appreciate their willingness to cooperate with me as many would just blow this off. Due diligence with ones manufacturers is incredibly important.

PROTOTYPE coil stands are available for preorder right now at a really great price for anyone on the Z Team who wants to help me test these out and make sure the heat dissipation is on point. This current design iteration is new and untested but it's based on earlier iterations that have been.

Just doing a clear anodized finish initially, but colored hot hole stands will roll out if the model proves to be successful.

PROTOTYPE [BETA] Coil Caddy / Stand / Hot Hole

PHASE3 coil stand [BETA EDITION] Form + Function Purpose built to safely secure hot runner coils for "wireless" heated quartz bangers and ball vapes Precision CNC machined from Anodized 6061 Aluminum Sleek, low-profile built in coil mounting point (i ncludes 8MM Set Screw for installation)

www.gophase3.com

At this point I have 500+ vape product designs and am ready to step it up, take more action and dish out way more of the good stuff for you guys, so much love to everyone rocking with me and supporting the vision, here's to finishing up the second half of 2025 with a bang!

 

[Oden]

Howdy friends quick lil update -

ZX's should be due in near the end of the month. Can't wait to get these out to everyone waiting! Ceramics and custom coils are in production right now.

ZXL's will 100% be coming; at least this small batch of them. I will be putting the order in soon, they will be coming in later than the ZX's.
I would not lag around too long on grabbing one for anyone who has been waiting for ZXLs to come up for sale again.

ZXXL replacement handles are being produced for testing and if confirmed those will be produced and sent out with all the ZXXLs.
I really apologize for the additional delays but my ceramic MFG does not want to replace these $$$$ parts for me until this new sample is confirmed. That said I appreciate their willingness to cooperate with me as many would just blow this off. Due diligence with ones manufacturers is incredibly important.

PROTOTYPE coil stands are available for preorder right now at a really great price for anyone on the Z Team who wants to help me test these out and make sure the heat dissipation is on point. This current design iteration is new and untested but it's based on earlier iterations that have been.

Just doing a clear anodized finish initially, but colored hot hole stands will roll out if the model proves to be successful.

PROTOTYPE [BETA] Coil Caddy / Stand / Hot Hole

PHASE3 coil stand [BETA EDITION] Form + Function Purpose built to safely secure hot runner coils for "wireless" heated quartz bangers and ball vapes Precision CNC machined from Anodized 6061 Aluminum Sleek, low-profile built in coil mounting point (i ncludes 8MM Set Screw for installation)

www.gophase3.com

At this point I have 500+ vape product designs and am ready to step it up, take more action and dish out way more of the good stuff for you guys, so much love to everyone rocking with me and supporting the vision, here's to finishing up the second half of 2025 with a bang!

It's honestly epic
I can't wait to see all these projects come to fruition.

 

[XoGnosis]

Howdy friends quick lil update -
...
ZXL's will 100% be coming; at least this small batch of them. I will be putting the order in soon, they will be coming in later than the ZX's.
I would not lag around too long on grabbing one for anyone who has been waiting for ZXLs to come up for sale again.

great news, I am patiently waiting. will you have extra bowls available after these come in? I forget which bowl I opted for, but would like to add the other one also - possible?

PROTOTYPE coil stands are available for preorder right now at a really great price for anyone on the Z Team who wants to help me test these out and make sure the heat dissipation is on point. This current design iteration is new and untested but it's based on earlier iterations that have been.

Just doing a clear anodized finish initially, but colored hot hole stands will roll out if the model proves to be successful.

PROTOTYPE [BETA] Coil Caddy / Stand / Hot Hole

PHASE3 coil stand [BETA EDITION] Form + Function Purpose built to safely secure hot runner coils for "wireless" heated quartz bangers and ball vapes Precision CNC machined from Anodized 6061 Aluminum Sleek, low-profile built in coil mounting point (i ncludes 8MM Set Screw for installation)

www.gophase3.com

I was hoping for phase 3 signature black zirconium - even though I know that's probably very cost prohibitive. I may change my mind about the aluminum when I see pictures vs renders but for now this one is a pass for me.

At this point I have 500+ vape product designs and am ready to step it up, take more action and dish out way more of the good stuff for you guys, so much love to everyone rocking with me and supporting the vision, here's to finishing up the second half of 2025 with a bang!

very much looking forward to what you bring to the space - whether in zirc or other materials.
(my disinterest in the stand is simply because I have several metal or metal and wood stands that are perfectly sufficient already so anything in that category has to be really special to grab my interest - price not withstanding).

 

[invertedisdead]

great news, I am patiently waiting. will you have extra bowls available after these come in? I forget which bowl I opted for, but would like to add the other one also - possible?

There's most likely not going to be a whole lot of extras so I highly recommend grabbing any add-ons soon.

I've received multiple requests in the last few days about adding the extra bowl so no worries there.

A few original ZXL supporters asked about just ordering the new bowls, I just need to make a product page for that.

I was hoping for phase 3 signature black zirconium - even though I know that's probably very cost prohibitive. I may change my mind about the aluminum when I see pictures vs renders but for now this one is a pass for me.

Yeah zirconia in this diameter range is extremely expensive.
Even just going from a ZX to a ZXXL is a real jump in material cost.

Especially since PHASE3 ceramics are all precision ground with diamond tooling, not molded ceramics (as other companies are now offering)

very much looking forward to what you bring to the space - whether in zirc or other materials.
(my disinterest in the stand is simply because I have several metal or metal and wood stands that are perfectly sufficient already so anything in that category has to be really special to grab my interest - price not withstanding).

It's all good friend, truthfully whether anyone buys or not these are all necessary exercises in putting my work out there.

II usually get these designs right where I want them and... just move on to something else. So I'm trying to break that habit.

I thought this was a slick take with the mounting hardware built right into the shroud, especially compared to a lot of the DIY stuff I've seen, but so far this one is not going anywhere

I might have to start posting the really cool stuff

 

[Sultana lungs]

Pre-ordered the ZXL not sure why cause the ZX is my end game especially with the new bowl. I’m thinking I’m just supporting but feeling good about it.All the best to the Z tribe

 

[PurpleHaze1911]

There's most likely not going to be a whole lot of extras so I highly recommend grabbing any add-ons soon.

I've received multiple requests in the last few days about adding the extra bowl so no worries there.

A few original ZXL supporters asked about just ordering the new bowls, I just need to make a product page for that.



Yeah zirconia in this diameter range is extremely expensive.
Even just going from a ZX to a ZXXL is a real jump in material cost.

Especially since PHASE3 ceramics are all precision ground with diamond tooling, not molded ceramics (as other companies are now offering)




It's all good friend, truthfully whether anyone buys or not these are all necessary exercises in putting my work out there.

II usually get these designs right where I want them and... just move on to something else. So I'm trying to break that habit.

I thought this was a slick take with the mounting hardware built right into the shroud, especially compared to a lot of the DIY stuff I've seen, but so far this one is not going anywhere

I might have to start posting the really cool stuff

Please share the real cool stuff I’d love to see some of the possibilities

 

[Ernielicous]

Please share the real cool stuff I’d love to see some of the possibilities

Yeah we should have like a multiple choice quiz on which ideas to fund first

 

[greenganja]

ZXXL replacement handles are being produced for testing and if confirmed those will be produced and sent out with all the ZXXLs.
I really apologize for the additional delays but my ceramic MFG does not want to replace these $$$$ parts for me until this new sample is confirmed. That said I appreciate their willingness to cooperate with me as many would just blow this off. Due diligence with ones manufacturers is incredibly important.

So if test handles are just now getting around to being produced. Does this mean we are looking at next year on the ship date, since we are already into mid June? And when you say it's the handles is it the actual ceramic handle or the wood part that go's over the handle I'm confused.

 

[PurpleHaze1911]

So if test handles are just now getting around to being produced. Does this mean we are looking at next year on the ship date, since we are already into mid June? And when you say it's the handles is it the actual ceramic handle or the wood part that go's over the handle I'm confused.

And key word being if confirmed. So in the event they’re produced and not confirmed will it be back to the drawing boards. Still no estimated or potential timeline. Could very well be into next year.

 

[invertedisdead]

So if test handles are just now getting around to being produced. Does this mean we are looking at next year on the ship date, since we are already into mid June? And when you say it's the handles is it the actual ceramic handle or the wood part that go's over the handle I'm confused.

The ceramic handles are being replaced and they should ship at the same time as the upcoming ZXLs.

The samples should be here with the ZX's.

The company wants to make sure there's no issues before replacing thousands of dollars worth of parts which seems reasonable enough to me though I know we all want them to be done yesterday.

Pre-ordered the ZXL not sure why cause the ZX is my end game especially with the new bowl. I’m thinking I’m just supporting but feeling good about it.All the best to the Z tribe

Cheers my dude, appreciate everyone holding down the Z Tribe big time!!!

And key word being if confirmed. So in the event they’re produced and not confirmed will it be back to the drawing boards. Still no estimated or potential timeline. Could very well be into next year.

I'm working as fast as I can on it but I'm just the vape guy, I don't have the diamond CNC machine.

The most recent timeline suggestions has not changed that much.
I was expecting the replacements would all be here with the ZX's, but my manufacturer wants to send some samples first before producing the entire batch in an expensive material. The finished parts should be in at the same time as the ZXLs; hopefully sooner.

Nobody wants to see these ZXXLs finished more than I do

 

[Pukka]

Everybody needs to remember that "All good things come to those who wait ..."

 

[Sultana lungs]

Everybody needs to remember that "All good things come to those who wait ..."

Luckily, with our wait it’s better than good

 

[Alligator427]

Just a question : the payement is done at the shipping ? The 320$ are not remove from my bank account until now, that is strange.
With the shit that made my bank for my last bank transfer to a foreign country ....

 

[Pukka]

Just a question : the payement is done at the shipping ? The 320$ are not remove from my bank account until now, that is strange.
With the shit that made my bank for my last bank transfer to a foreign country ....

AFAIK the cash goes out at time of purchase not at shipping.

 

[Alligator427]

AFAIK the cash goes out at time of purchase not at shipping.

At the pre-order or when the order is confirmed ?
Do we received an e-mail from paypal or only from phase3 ?

 

[Pukka]

At the pre-order or when the order is confirmed ?
Do we received an e-mail from paypal or only from phase3 ?

Well, Ryan better have gotten paid when I ordered, PayPal Credit's charging me as of that date ...