Open Source Glass Thread

Awesome to hear about the torus. how about one of those klein prototypes like on first page. Those were looking good!

I assume one of those chinese glass blowers has the klein design figured out cause thick ass glass has one and the rest of their rigs look the same as the DHgate sellers
 
Last edited:

John Lewus

Well-Known Member
Good to know. Guess it is time to place those orders I've been holding off on. Figuring everything should start rolling this coming week. Let's hope so anyway!

Why would you wait? I assume that everyone just goes into a queue and it is first in first out. I ordered mine during CNY and did not see any logic in waiting if I knew I wanted it.
 

flotntoke

thoroughly vaped
Why would you wait? I assume that everyone just goes into a queue and it is first in first out. I ordered mine during CNY and did not see any logic in waiting if I knew I wanted it.

Know these bubbs are super cheap, but would rather have money to spend than have it tied up in China if nothing is moving forward. A month or so is long enough wait from purchase to use for me.

Also.. could be wrong - who knows how these guys work out their orders - but doesn't seem the queue works like we're used to in Western World. First in is doesn't necessarily seem to mean first out. I was one of the later orders for the initial FC-187, but got mine a couple weeks before others who said they ordered before me.
 

John Lewus

Well-Known Member
Know these bubbs are super cheap, but would rather have money to spend than have it tied up in China if nothing is moving forward. A month or so is long enough wait from purchase to use for me.

Also.. could be wrong - who knows how these guys work out their orders - but doesn't seem the queue works like we're used to in Western World. First in is doesn't necessarily seem to mean first out. I was one of the later orders for the initial FC-187, but got mine a couple weeks before others who said they ordered before me.

You bring up a good point. I just assumed they worked on these in the order they are getting them. If they don't do that then they should. I'd say leave some negative feedback (4 star maybe instead of 5) but since you got yours sooner that would not make any sense :)
 
John Lewus,
  • Like
Reactions: SSVUN~YAH

flotntoke

thoroughly vaped
You bring up a good point. I just assumed they worked on these in the order they are getting them. If they don't do that then they should. I'd say leave some negative feedback (4 star maybe instead of 5) but since you got yours sooner that would not make any sense :)

I don't sweat the little shit like whether I'm first in or first out. As long as it gets here and isn't broken, I'm good. Even with a crappy perc or whatever. Sometimes stuff is here in less than two weeks, sometimes 6 weeks. It's all part of the Chinese glass experience IMO.

I'd feel a good bit differently if I was paying 10x and more as much on ALT or somewhere like that. Including dupes and gifts, I think I've bought about 10 pieces in the past year and a half or so. In total, they cost only a little more than my Ben Wilson triple donut that I got used! Don't get me wrong.... still love that piece and have been using it a good bit lately, but cheap is good too! Just don't assume or expect things to go like they would if you were spending a good bit more. To do so seems to lead to headaches and frustration as much as anything else. On occasion, you can have your cake and eat it too - but that's pretty rare.
 

negan

Well-Known Member
@gigaurora what kind of delay did you have between "Despatch from Sorting Center" (CHENGDU) and either any tracking after that or just when it was delivered? I'm east coast, so I'm guessing it will take longer for me than WC peeps. I ordered on the 4th though :(
 

grdwaste

Glass Psycho
@gigaurora what kind of delay did you have between "Despatch from Sorting Center" (CHENGDU) and either any tracking after that or just when it was delivered? I'm east coast, so I'm guessing it will take longer for me than WC peeps. I ordered on the 4th though :(
It varies from person to person and each order. I had one of my packages stuck in Chicago for 2 weeks because for whatever reason they just kept resorting it. I think its just luck on if your package has problems or if it's a smooth sailing
 

TheBlazingBeast

Well-Known Member
I ordered pieces from CCG and steven's 710 on feb 10th, and got all my glass in last week... i almost feel bad.

keyword: almost ;)
cf7Pnhf.jpg

:rofl:.. rofls aside - let us know what ya got & how you like em once you've given your pieces their virgin hits. All the rest of us can do is anxiously or not so anxiously await:spliff:
 

PoopMachine

Well-Known Member
@gigaurora what kind of delay did you have between "Despatch from Sorting Center" (CHENGDU) and either any tracking after that or just when it was delivered? I'm east coast, so I'm guessing it will take longer for me than WC peeps. I ordered on the 4th though :(

I ordered before you did and mine hasnt updated either. I dont know how much longer Im going to wait before I contact the seller. While Im pretty sure the stuff will show up, Ive had this happen before and the package never arrive.
 
PoopMachine,
  • Like
Reactions: SSVUN~YAH

BHOmber

Well-Known Member
Is there an idea of when Steven's stereo matrix is going to be available? I LOVE the clean look of the pre-order model he has posted.

EDIT: Also have an FC-710 supposedly being shipped out tomorrow! I accidentally chose EMS instead of ePacket when ordering and told Steven I had to cancel the first to change it. He said to make sure to do it quickly because his factory was shipping very soon, which I'm guessing will be the first Monday after CNY. Can't wait to get this thing!
 
Last edited:

darkrom

Great Scott!
Where can I get these mini pillars, and how much? Is it the fc-711?

Who sells them? I've wanted a real Möbius matrix since I saw it. Got that. The only glass left on my bucket list is a peyote pillar, and I think the size of that one is better than the $$$$$$$ soverinty glass.
 

John Lewus

Well-Known Member
Is there an idea of when Steven's stereo matrix is going to be available? I LOVE the clean look of the pre-order model he has posted.

EDIT: Also have an FC-710 supposedly being shipped out tomorrow! I accidentally chose EMS instead of ePacket when ordering and told Steven I had to cancel the first to change it. He said to make sure to do it quickly because his factory was shipping very soon, which I'm guessing will be the first Monday after CNY. Can't wait to get this thing!

Watts wrong with EMS? I just chose whatever the default was. I hope I did not mess something up.
 
John Lewus,

gigaurora

Well-Known Member
@gigaurora what kind of delay did you have between "Despatch from Sorting Center" (CHENGDU) and either any tracking after that or just when it was delivered? I'm east coast, so I'm guessing it will take longer for me than WC peeps. I ordered on the 4th though :(

LM ( package one, steven).
ordered: 14/02
Shipped by seller: 14/02
Left Chengdu 15/02
Left china 18/02
arrived in canada 22/02
arrived at my place 25/02

LM ( package 2, CCG)

ordered: 7/02
Shipped by seller: 9/02
Left Chengdu 9/02
Left china 11/02
arrived in canada 15/02
arrived at my place 23/02

LM ( Package 3, CCG)
ordered: 7/02
Shipped by seller: 7/02
Left Chengdu 7/02
Left china 10/02
arrived in canada 13/02
arrived at my place 18/02

:rofl:.. rofls aside - let us know what ya got & how you like em once you've given your pieces their virgin hits. All the rest of us can do is anxiously or not so anxiously await:spliff:


Glass:

FC-710 :http://www.dhgate.com/product/2015-...r/216674730.html#myaccount_orderdetail-1-null

This review is pretty unnecessary since it's been reviewed and raved to death, but all raving is much deserved. I've yet to find a piece with as little drag and flavour loss to the perfect amount of diffusion like this piece. and that little click of the ball is very soothing, like a mother's heartbeat.
Summary:
Thickness: enough not to worry about it, seems 5m around.
joint: perfect, no issue
drag: like none. Mouth piece has a wide tube, the simply pathing of the "perc" means its pretty much like breathing.
flavour: least flavour loss i've ever had.

Incycler: http://www.dhgate.com/product/two-u...r/212271486.html#myaccount_orderdetail-2-null

I'm actually really fucking impressed with this piece. It's function is perfect. The bottom perc has full 360 spread. The inner vortex is really tight, vortexing within a second of starting to drag. For it's price, a really cool party piece that gets the ooo's and awww's, but cheap enough that you don't mind the risk of breaking it with people around.

Summary:
Thickness: thinner then the 710, but not thin enough to be an issue. enough to survive mild tips, and get it to the level where if the impact will break this bong, it'd probably break anything other then a thick 7 or 9m.
joint: perfect, no issue
drag: much more drag then you'd like. The pathing tubes have a narrow diameter, plus it being an in cycler, gets some serious drag. Not enough that you'd be mad, but when comparing it to the 710 its hard not to notice
flavour: some flavour loss, but not completely
diffusion: phenomenal diffusion. This is one of the pieces where ( i run an EVO) you set up an elb and basically just keep hitting until no more vapour comes out it hits so smooth. like breathing mountain air.

A+ on both pieces, seriously should be added to all dhgate addict wish lists.
 

BHOmber

Well-Known Member
Watts wrong with EMS? I just chose whatever the default was. I hope I did not mess something up.

I've just read that ePacket is the best shipping option out of China now. I don't think EMS will cause too much of a difference. I just ordered my previous pieces with ePacket and wanted to stick with it.
 

John Lewus

Well-Known Member
I've just read that ePacket is the best shipping option out of China now. I don't think EMS will cause too much of a difference. I just ordered my previous pieces with ePacket and wanted to stick with it.

Looks like mine went out epacket. I guess I got lucky since I was not paying any attention.
 
John Lewus,
  • Like
Reactions: SSVUN~YAH

PoopMachine

Well-Known Member
Looks like mine went out epacket. I guess I got lucky since I was not paying any attention.

I specifically ordered mine with EMS shipping and they shipped it ePacket anyway.

I got a reply from Steven this morning about my piece that hasnt updated in a month. He claims the NY snowstorms is whats slowed down his stuff. My only problem with that is my Dcycler that was ordered two weeks after his came through New York without any kind of delay at all. I dont really understand why his stuff seems to be taking so long to update. Ive never had a piece take this long and actually show up.

Sorry to ramble.. after being burned by Kathy, I start to get nervous when it appears nothing is happening.
 

DieHard

Accessory supplier
Accessory Maker
I specifically ordered mine with EMS shipping and they shipped it ePacket anyway.

I got a reply from Steven this morning about my piece that hasnt updated in a month. He claims the NY snowstorms is whats slowed down his stuff. My only problem with that is my Dcycler that was ordered two weeks after his came through New York without any kind of delay at all. I dont really understand why his stuff seems to be taking so long to update. Ive never had a piece take this long and actually show up.

Sorry to ramble.. after being burned by Kathy, I start to get nervous when it appears nothing is happening.
I ordered on 2/14, tracking showed nothing until this morning. Today it shows up stateside. Probably another 2 days and mine should arrive. I am holding out hope for you poop.
 

alex h

Well-Known Member
Made two orders from CCG and Steven on 2/2/15 and nothing has updated since it was dispatched from China on 2/7/15. Should i be a little worried?
 

PoopMachine

Well-Known Member
I ordered on 2/14, tracking showed nothing until this morning. Today it shows up stateside. Probably another 2 days and mine should arrive. I am holding out hope for you poop.

I ordered 14 days before you did and mine still hasnt moved. Maybe tomorrow... I dont mind waiting but once it pops in the US, it usually takes 10 more days to get to me. This is going to put me at right at 5-6 weeks. Ive NEVER had this kind of delay dealing with anything from China.
 

blankrider

Well-Known Member
Hey guys Steven has a new Torus prototype done and has almost worked out all the kinks.
He has improved the perc but this one they forgot the holes at the top of the funnel. All he needs to do is add the holes and it should be good. Everyone cross your fingers that the next one is on point.

Edit: also I'm feeling bad for you @PoopMachine and really hope that your glass shows up soon and safe. Perhaps ask Steven for a discount on future orders to make up for your lengthy wait
 

blankrider

Well-Known Member
@NickDlow I am waiting for a second ufo prototype to be produced. The first one was made with a 65mm can which is the same as the 187 can. I told him for the second one to increase the can size to 75mm and also make a longer neck.
OTsfBsu.jpg

biFRQBy.jpg


I provided my best description and pictures for him to make the hookah hose attachment so hopefully he understands and is able to make it as well
 
Top Bottom