Discontinued Omicron Vaporizer for oils

[vishus650]

has anyone has anyproblems with the v2? its working flawless for me. and i had horrible luck with the v1.x

this company is far ahead of the game. keep pushing yall!!

 

[happy]

ok guys, so im back from my little getaway.

Vegas baby, i finally smoked without worrying about any issues.

Had with me a Persei unit and had a blast, had lots of wine, along with double barrel fun at the tables, anxiety gone, relaxed, and feeling great.

I even scared a guy with a ecig who thought he was being all slick about covert use.

Well its work time somewhere so gotta get to it.

I live in the valley i want to come by and exchange my v1 plus cash for a v2. How can i do that

 

[hatfieldsmama]

has anyone has anyproblems with the v2? its working flawless for me. and i had horrible luck with the v1.x

this company is far ahead of the game. keep pushing yall!!

what problems did you have with v1?

 

[Nugget49er]

Interesting observation. Normally, I'd never see that since I tend to replace with what was there. Since you leave 150 mg or so behind when it's 'empty' some mixes in with the next load, although you'd think by the seventh gram that would be long gone. The wick, however, might have been spared something early in life (like overheating under the coil??) perhaps that lasts.

Be fun to have some dry burn drill (as yet not defined by THC), followed by a mandatory half gram of PG to get the cart 'broken in' for the load to be tried. I could do that for guys too busy......

OF

OF - Do you find better results by loading .5 g of cons at a time, to reduce the chance of clogs and leakage??
Did you see my first picture post? I think most people on this site have a vaporizer and an unused potpourri bowl. I can't believe how cluttered my bench looks.
Thanks for all the great posts.

PS Don't buy the Gentelmans Brand M601 it DOESN'T Fit the Omicron cart. Will adviser on electronic-cigzs M601 adapter when I receive it.

 

[happy]

what problems did you have with v1?

I have both, v2 works better

 

[Silvercloud538]

I have both, v2 works better

HINT : since you also hav v.1 ,when v.2 clogs thick ,'"infrequently"' ,the hi-amped v.1 is hot enuf

to get things going again (cumulous ,lol) ~ Hope this helps ya ~

 

[OF]

OF - Do you find better results by loading .5 g of cons at a time, to reduce the chance of clogs and leakage??
Did you see my first picture post? I think most people on this site have a vaporizer and an unused potpourri bowl. I can't believe how cluttered my bench looks.
Thanks for all the great posts.

PS Don't buy the Gentelmans Brand M601 it DOESN'T Fit the Omicron cart. Will adviser on electronic-cigzs M601 adapter when I receive it.

I only do that with PG. Stuff's expensive and leaks easy. Others I'll load a full gram when I'm sure it's down low. I screwed up once and dumped another gram of wax into the wrong cart, I ended up with 1.6 grams near as I could tell and nothing but grief until it was under a gram again. Not sure why it wanted to plug so bad but it could have been because it was one part oil and two parts another wax?

Saw the photo, didn't faze me a bit. You haven't seen my the desk here have you? Hit the showers now, kid, you're out of your league......

Thanks for the tip, but I already bought 3 from the other fellow (GB had some BS about having to use Google to buy it, and I'm thinking maybe they're sticking their nose in lots of places to make lists to sell to advertisers and all......I'm not sure I want my name associated with those sorts of purchases, are you?. I blew it off and went to the other guys and it seems got lucky). Anyway, you'll like them, well made and they work well. At least so far.

OF

 

[bombaysippin]

can anyone help me out? the omicron seems to not be working.... been using it for 3 months no problems but now not getting anything with i slowly enhale holding the button down. the cartridge I just filled last week and used it for 3 days since no problems... the battery fully charged.... what might be the problem is the battery is not getting the power to the cartridge because I don't feel the cartridge heating up. any solutions?

 

[kertong]

@bombaysippin: what happens to the blue light? anything? does it light and stay on? does it blink? or does it light up gradually, then fade back away when you release it? If the cart is down and tightened, and the blue light lights up gradually and fades away gradually when you press the button, then I'd say you have a bad cart. If the blue light blinks as soon as you press it, yes, you're out of charge and your charger is probably broken/not charging the batt properly. If the blue light just stays on solidly for about 5 seconds then abruptly shuts off, it's a short somewhere in the battery unit, or the central disc in the battery where the cart makes contact, is somehow touching the sides of the battery and grounding itself out, etc.

 

[Silvercloud538]

can anyone help me out? the omicron seems to not be working.... been using it for 3 months no problems but now not getting anything with i slowly enhale holding the button down. the cartridge I just filled last week and used it for 3 days since no problems... the battery fully charged.... what might be the problem is the battery is not getting the power to the cartridge because I don't feel the cartridge heating up. any solutions?

Me imagines ,you hav no 2nd cart to test heat transfer ,sooo ,chances are ya hav a dead cart ~ try

another cart ,or volt meter ~ last resort ,online delta9vapes has online realtime support ,or live call during

normal biz hrs ~ in meantime ,ya can make out a support ticket to back everything w/ text ~

Hope this helps ya ~ that is all

 

[bombaysippin]

@bombaysippin: what happens to the blue light? anything? does it light and stay on? does it blink? or does it light up gradually, then fade back away when you release it? If the cart is down and tightened, and the blue light lights up gradually and fades away gradually when you press the button, then I'd say you have a bad cart. If the blue light blinks as soon as you press it, yes, you're out of charge and your charger is probably broken/not charging the batt properly. If the blue light just stays on solidly for about 5 seconds then abruptly shuts off, it's a short somewhere in the battery unit, or the central disc in the battery where the cart makes contact, is somehow touching the sides of the battery and grounding itself out, etc.

when I press the blue button down and hold until the 6 seconds it's solid blue 1-6 like normal then blinks when it gets into the 7 second range like normal. I do have another cartridge but nothing is in that cartridge. The battery is fully charged for sure.

 

[kertong]

ah yeah sounds like you have a bad cart. try putting the empty cart on the batt and holding the button down, and look down the middle hole at the top of the cart. You should see an orange heating element. Don't hold it too long, it's bad to heat that element without any oil around it, but doing it just long enough to check that the heat comes on and the element glows, is ok. This would rule out the batt being bad, and would pretty much confirm that you have a dead cart imo..

 

[bombaysippin]

Me imagines ,you hav no 2nd cart to test heat transfer ,sooo ,chances are ya hav a dead cart ~ try

another cart ,or volt meter ~ last resort ,online delta9vapes has online realtime support ,or live call during

normal biz hrs ~ in meantime ,ya can make out a support ticket to back everything w/ text ~

Hope this helps ya ~ that is all

I do have a 2nd cartridge... why would this cartridge be dead, I just started using it a few days ago lol. I've been priming the current cartridge now it feels warm but not hot... how warm is it supposed to feel? Still not getting any vapor though... I'm thinking this cold weather and the place I have been storing the vaporizer caused the oil inside the cartridge to get hard due to the cold tempratures... do I heat the cartridge with a lighter and see if that softens the oil?

 

[bombaysippin]

ah yeah sounds like you have a bad cart. try putting the empty cart on the batt and holding the button down, and look down the middle hole at the top of the cart. You should see an orange heating element. Don't hold it too long, it's bad to heat that element without any oil around it, but doing it just long enough to check that the heat comes on and the element glows, is ok. This would rule out the batt being bad, and would pretty much confirm that you have a dead cart imo..

ok will try this but why would my cartridge be "dead" after 3 days? makes no sense lol.

 

[bombaysippin]

for what its worth last week I went to use the vaporizer and held the button wasnt getting vapor so I unscrewed the cart and then rescrewed it then magically it worked? wtf?

 

[bombaysippin]

ok so i tried the other empty cart and saw the orange what is the likely issue? the oil inside the cartridge I think is hardened due to the cold temprature it was stored at I believe this is probably the issue? How do I melt the oil again in a safe way for my cart? lighter up and down it?

 

[THC SCIENTIFIC]

ok so i tried the other empty cart and saw the orange what is the likely issue? the oil inside the cartridge I think is hardened due to the cold temprature it was stored at I believe this is probably the issue? How do I melt the oil again in a safe way for my cart? lighter up and down it?

Just take a lighter and slowly heat the top of the cartridge. this should melt all of it down.

 

[bombaysippin]

Just take a lighter and slowly heat the top of the cartridge. this should melt all of it down.

thank you boss will try this... have pretty good faith it will work.

 

[THC SCIENTIFIC]

if you see the glow in the middle air tube, then that means your cartridge is good, just need to heat the oil down.

 

[JoeKickass]

Sounds like you guys need to take a trip up to the bay area... I regularly see high cbd low thc oil and waxes made specifically for pain relief patients. Check out this one from SPARC:

While browsing their menu I also found this killer deal for us THC lovers:

Well turns out the blue dream melt is really just very strong bubble hash, but the cbd oil is great! I also recommend smelling the chocolope wax if you visit

 

[hatfieldsmama]

is it possible for a cartridge to have 1 working part and one non-working part? like i wouldnt be able to tell if my cartridge was 1/2 dead

 

[Mflbparox]

i was making QWISO and like right when it got sticky and wasnt liquidy anymore i scraped it up should i have waited longer could their be alcohol in my DARK coulored oil that is harmful? (it was dark cause its the second time i ran a quick wash with this bud like 3 grams)

 

[Robaba89]

i was making QWISO and like right when it got sticky and wasnt liquidy anymore i scraped it up should i have waited longer could their be alcohol in my DARK coulored oil that is harmful? (it was dark cause its the second time i ran a quick wash with this bud like 3 grams)

You need to purge or there will be alcohol in your product. You will taste it and you probably will feel it.

 

[asaghost]

My Omicron from SPARC does a good job, and the CBD Venom oil helps me with walking. I might upgrade to the V2 next month, but my oil cart needs to dry out first.

 

[bombaysippin]

if you see the glow in the middle air tube, then that means your cartridge is good, just need to heat the oil down.

what do you mean by this? see a orange glow even with a filled cartridge?