Discontinued Omicron Vaporizer for oils

druminfected

druminfected

Well-Known Member
THC SCIENTIFIC said:
Ok so back on topic.


Black matte Omicron ready to pre order in a few minutes.

also Polished Chromes will be available in two weeks for pre order.


Waiting on Confirmation for 7.4v option for the Omicron V2's. Ya 7.4v option we said it. Once again Engineers are looking into it.
Click to expand...


Wow, both Polished Chrome looks great and whoa 7.4 option? you did say it! That would be one helluva option!

FYI on the Delta9Vapes site on the front page you have a slideshow of omicron products, but still showing a picture of the old omicron version. maybe you might want to change that, and maybe even add a persei picture as well! Just my :2c: :)
 
druminfected,
OF

OF

Well-Known Member
druminfected said:
OF said:
druminfected said:
Anyone that gets some of this tube, I'm down to pay a buck or so via paypal, for a piece of tube (length of a magic flight tube) and light enough to just slap a stamp or 2 on for shipping. I'm not a local so don't have this store and can't get around that easy. I'm sure other members would want in on this too!

That or anywhere I could order this online on the cheap would be great as well.
Click to expand...

I've been involved in such 'group buys' before, and while I understand the desire and idea and all my experience is it's a real PITA to address and ship all those little 'low cost' packages. To make it even worse, I don't support PayPal so that option is out.

But, I'll tell you what. If one of you wants to volunteer to distribute the tube, I'll go buy another stick or two next time I'm out that way, cut it into say six inch pieces (?). I will mail the lot to you free of charge if you'll agree to distribute it at modest price to Members who want it? We can co-ordinate the details like length so it'll be easy to ship out in say padded envelopes, hopefully in long enough pieces so guys can cut them shorter as they wish (getting at least two stems in the process). It cuts easily with a hacksaw (or as I recall Vitolo used a kitchen steak knife) and smooths up nicely with file, sandpaper or in Vitolo's case a finger nail file as I recall?

Any volunteers?

OF
Click to expand...

Remember we talked about this, but no one replied that they wanted any tubes? Well, I'm still down to do this if you are still offering. :) I tried out a 3'' MFLB stem mod on the omicron, and I almost think this should be included with the omicron! :o You truly do have to almost sip on the cartridge to get the hits you want, but it does show you how to do it, and is definitely "training wheels" as a fellow member stated.

I think it's a valuable and must needed tool for beginners, heck even for pros that think they know how to hit it, this tool can help anyone! Only con about this is the 3'' stem isn't long enough IMO. If it was a bit longer, you could really see how the vapor is working and would love to get a longer stem.

If OF is willing to do this, then I will ship out stems to people requesting it on a first come first serve. I would cut them 6 to 7 inches. If you don't feel like doing this still no worries at all. :)
Click to expand...

I'm game to give it a try. Figure it out and either say as much here or send me some email and I'll get some tube and see where it goes.....

OF
 
havealight101

havealight101

Norski
druminfected said:
OF said:
druminfected said:
Anyone that gets some of this tube, I'm down to pay a buck or so via paypal, for a piece of tube (length of a magic flight tube) and light enough to just slap a stamp or 2 on for shipping. I'm not a local so don't have this store and can't get around that easy. I'm sure other members would want in on this too!

That or anywhere I could order this online on the cheap would be great as well.
Click to expand...

I've been involved in such 'group buys' before, and while I understand the desire and idea and all my experience is it's a real PITA to address and ship all those little 'low cost' packages. To make it even worse, I don't support PayPal so that option is out.

But, I'll tell you what. If one of you wants to volunteer to distribute the tube, I'll go buy another stick or two next time I'm out that way, cut it into say six inch pieces (?). I will mail the lot to you free of charge if you'll agree to distribute it at modest price to Members who want it? We can co-ordinate the details like length so it'll be easy to ship out in say padded envelopes, hopefully in long enough pieces so guys can cut them shorter as they wish (getting at least two stems in the process). It cuts easily with a hacksaw (or as I recall Vitolo used a kitchen steak knife) and smooths up nicely with file, sandpaper or in Vitolo's case a finger nail file as I recall?

Any volunteers?

OF
Click to expand...

Remember we talked about this, but no one replied that they wanted any tubes? Well, I'm still down to do this if you are still offering. :) I tried out a 3'' MFLB stem mod on the omicron, and I almost think this should be included with the omicron! :o You truly do have to almost sip on the cartridge to get the hits you want, but it does show you how to do it, and is definitely "training wheels" as a fellow member stated.

I think it's a valuable and must needed tool for beginners, heck even for pros that think they know how to hit it, this tool can help anyone! Only con about this is the 3'' stem isn't long enough IMO. If it was a bit longer, you could really see how the vapor is working and would love to get a longer stem.

If OF is willing to do this, then I will ship out stems to people requesting it on a first come first serve. I would cut them 6 to 7 inches. If you don't feel like doing this still no worries at all. :)
Click to expand...

I've been using an eyeglass dropper. I think OF(?) brought it up last week. I think it works very well(not stealthy), and its nice that its glass. I used a slight bit of olive oil to help feed it in the old mouthpieces, so that I wouldn't shove it through my hand.
 
havealight101,
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
tharealmclovin said:
Any chance of a 1.5 ohm cart coming with version 2?
Click to expand...

We are keeping the 2.4 ohm version in the units. the 1.5 ohm are for people who really know what they are doing.
 
THC SCIENTIFIC,
druminfected

druminfected

Well-Known Member
OF said:
druminfected said:
OF said:
I've been involved in such 'group buys' before, and while I understand the desire and idea and all my experience is it's a real PITA to address and ship all those little 'low cost' packages. To make it even worse, I don't support PayPal so that option is out.

But, I'll tell you what. If one of you wants to volunteer to distribute the tube, I'll go buy another stick or two next time I'm out that way, cut it into say six inch pieces (?). I will mail the lot to you free of charge if you'll agree to distribute it at modest price to Members who want it? We can co-ordinate the details like length so it'll be easy to ship out in say padded envelopes, hopefully in long enough pieces so guys can cut them shorter as they wish (getting at least two stems in the process). It cuts easily with a hacksaw (or as I recall Vitolo used a kitchen steak knife) and smooths up nicely with file, sandpaper or in Vitolo's case a finger nail file as I recall?

Any volunteers?

OF
Click to expand...

Remember we talked about this, but no one replied that they wanted any tubes? Well, I'm still down to do this if you are still offering. :) I tried out a 3'' MFLB stem mod on the omicron, and I almost think this should be included with the omicron! :o You truly do have to almost sip on the cartridge to get the hits you want, but it does show you how to do it, and is definitely "training wheels" as a fellow member stated.

I think it's a valuable and must needed tool for beginners, heck even for pros that think they know how to hit it, this tool can help anyone! Only con about this is the 3'' stem isn't long enough IMO. If it was a bit longer, you could really see how the vapor is working and would love to get a longer stem.

If OF is willing to do this, then I will ship out stems to people requesting it on a first come first serve. I would cut them 6 to 7 inches. If you don't feel like doing this still no worries at all. :)
Click to expand...

I'm game to give it a try. Figure it out and either say as much here or send me some email and I'll get some tube and see where it goes.....

OF
Click to expand...

Sure thing OF. I can mail out tubes to people if they would like one. Since OF is nice enough to send it to me free of charge, I would like to pay it forward and send them out to people that need/want them. I think I can get the shipping down to less than a buck too. We shall see, I would have to weigh the postage, but think it's manageable.
 
druminfected,
Jeppy

Jeppy

Pure Vaporist
Is the Omicron V2 case a big selling point? I just went on Delta site to look at the new version and there are 3 pictures of the case and 1 of the actual device as it sits inside of the case. Any videos yet?
 
Jeppy,
OF

OF

Well-Known Member
druminfected said:
Sure thing OF. I can mail out tubes to people if they would like one. Since OF is nice enough to send it to me free of charge, I would like to pay it forward and send them out to people that need/want them. I think I can get the shipping down to less than a buck too. We shall see, I would have to weigh the postage, but think it's manageable.
Click to expand...

Cool, like I said let me know what you decide WRT length(s) you want to use and an address to send them to. I'll plan to pick up a stick or two of tube next time I'm out that way.

OF
 
OF,
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Jeppy said:
Is the Omicron V2 case a big selling point? I just went on Delta site to look at the new version and there are 3 pictures of the case and 1 of the actual device as it sits inside of the case. Any videos yet?
Click to expand...


We will update the images soon, and also post up a video.
 
chucho

chucho

Well-Known Member
Any way to buy a packet of Extract Cartridges 2.4ohm for 3.7v not having to pay 35 dolar for international shipping? is there a cheaper way of shipping?
 
chucho,
JoeKickass

JoeKickass

Well-Known Member
tharealmclovin said:
hatfieldsmama said:
being able to go up to 7.4+ volts is reallllllly tight about the new one.
Click to expand...

I may be wrong but i think only the Persei has the variable voltage.
Click to expand...

So far...

THC SCIENTIFIC said:
Ok so back on topic.


Black matte Omicron ready to pre order in a few minutes.

also Polished Chromes will be available in two weeks for pre order.


Waiting on Confirmation for 7.4v option for the Omicron V2's. Ya 7.4v option we said it. Once again Engineers are looking into it.
Click to expand...
 
JoeKickass,
OF

OF

Well-Known Member
chucho said:
Any way to buy a packet of Extract Cartridges 2.4ohm for 3.7v not having to pay 35 dolar for international shipping? is there a cheaper way of shipping?
Click to expand...

Have you checked with Planet Vape in Canada? They do international as well and IMO are an excellent dealer.

OF
 
OF,
chucho

chucho

Well-Known Member
OF said:
chucho said:
Any way to buy a packet of Extract Cartridges 2.4ohm for 3.7v not having to pay 35 dolar for international shipping? is there a cheaper way of shipping?
Click to expand...

Have you checked with Planet Vape in Canada? They do international as well and IMO are an excellent dealer.

OF
Click to expand...

They are out of stock and i dont now their shipping cost, but thank you.
 
chucho,
THC SCIENTIFIC

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
chucho said:
OF said:
chucho said:
Any way to buy a packet of Extract Cartridges 2.4ohm for 3.7v not having to pay 35 dolar for international shipping? is there a cheaper way of shipping?
Click to expand...

Have you checked with Planet Vape in Canada? They do international as well and IMO are an excellent dealer.

OF
Click to expand...

They are out of stock and i dont now their shipping cost, but thank you.
Click to expand...

They just got them in today and will be having them online tomorrow i think.
 
THC SCIENTIFIC,
hatfieldsmama

hatfieldsmama

Active Member
anyone else in denver? interested in splitting a case 1.5 ohm carts? i cant really afford 5 of em, but ill take 2 or 3..... let me know if anyone can help :)
 
hatfieldsmama,
You must log in or register to reply here.
Top Bottom