Oilvaporizer.com

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ

Thank you sir. I know I've said it before, but you always take the best pics.

I love my shiny silver/chrome perseis, but brushed seems like it wouldn't show prints or scratches as much. I was leaning towards brushed, I'm having a surprisingly tough time choosing. Your pic is making me lean polished though, that thing almost looks alive.
 

thegoo

Well-Known Member
For some reason I can't get anywhere near the amount of cloud production from the dual coils as I do from the singles.....
I have tried running the dual coils on my 8 as well as my istick and no matter what voltage i use, the vapor is pretty whispy, as soon as I throw on the single coil it is cloud city.
Anyone else run into this situation with these new gen 3 kiss carts??
 
thegoo,

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
For some reason I can't get anywhere near the amount of cloud production from the dual coils as I do from the singles.....
I have tried running the dual coils on my 8 as well as my istick and no matter what voltage i use, the vapor is pretty whispy, as soon as I throw on the single coil it is cloud city.
Anyone else run into this situation with these new gen 3 kiss carts??
Sounds like a cart issue, I think I've seen posts about adjusting center pins and it working or something. At 3.7 I don't have much luck with the dual coil, but at 7.4 it should be strong enough that you need to feather the button. I'm sure @SamuraiSam can/will help.
 
StormyPinkness,
  • Like
Reactions: SamuraiSam

mystikalghost

Well-Known Member
Coming across my first issue with the KISS Gen 3 carts. The mouthpiece doesn't want to stay connected. I think the reclaim inside is pushing it to the top and sometimes the top has popped off while in use. It's always up a little bit like even when not in use. Don't want it falling off in my pocket! Not sure how to prevent this from happening aside from scraping the inside constantly?

I was thinking about it, and there should be a small notch or something inside the tube where the O-Ring could rest and that would potentially keep it in place. Speaking of O-Rings, where can I buy more that would fit the mouthpiece? Maybe a slightly bigger one would fix the problem?
 
Last edited:
mystikalghost,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Coming across my first issue with the KISS Gen 3 carts. The mouthpiece doesn't want to stay connected. I think the reclaim inside is pushing it to the top and sometimes the top has popped off while in use. It's always up a little bit like even when not in use. Don't want it falling off in my pocket! Not sure how to prevent this from happening aside from scraping the inside constantly?

I was thinking about it, and there should be a small notch or something inside the tube where the O-Ring could rest and that would potentially keep it in place. Speaking of O-Rings, where can I buy more that would fit the mouthpiece? Maybe a slightly bigger one would fix the problem?

Currently working on a better mouth piece. Until then a iso wipe down should help with it staying put.
 

SamuraiSam

Extraction Technician
I think that the Nibbler U is the Unimizer Bubbler I've been testing out!
I haven't been able to try the Unimizer until now; I've just received one to test out today! Thanks @VaporGoddess and @THC SCIENTIFIC for sending me a new Unimizer Bubbler to test out too!

llfqxNW.jpg


Unimizer Bubbler, coming soon, on the Unimizer Oil Cartridge. Powered by our Omega 1400 Vaporizer
The Nibbler U shreds just as hard as the Nibbler AC. I'm a huge fan of the honeycomb splash guard and the single point diffuser is optimal for a pen, lots of flexibility in how its used.
 
SamuraiSam,
  • Like
Reactions: elmoe420

SamuraiSam

Extraction Technician
Can anyone tell me if the 1701 with the Alpha globe will actually work well on an ego vv battery (specifically http://www.smoktek.com/eMax-VVVW-1300mAh-eGo-Battery-Variable-VoltWattage_p_874.html)

The company line is that it will but everything I read says I need a mod or Istick .

And I have the same question about the Unimizer .

Any help with this is appreciated .
The main issue with compatibility here is the amp rating of the battery. Many of these pen style batteries can't output more than about 2.5 amps so the ohm cutoff would be higher than 1 ohm.

Our Alpha Globe coils put a significant load on a battery with a resistance of about 0.6Ω-0.8Ω so we would suggest making sure your battery could fire that load. Can you find any information about what the ohm cutoff / resistance capabilities of your battery are?
 
SamuraiSam,

FUnhouse

Well-Known Member
The main issue with compatibility here is the amp rating of the battery. Many of these pen style batteries can't output more than about 2.5 amps so the ohm cutoff would be higher than 1 ohm.

Our Alpha Globe coils put a significant load on a battery with a resistance of about 0.6Ω-0.8Ω so we would suggest making sure your battery could fire that load. Can you find any information about what the ohm cutoff / resistance capabilities of your battery are?

Thanks I will try to find out .
But Why would it work on you batteries and not mine ?
I have been told that it will work with no problems on your batteries. Which are pen style batteries?

The main issue with compatibility here is the amp rating of the battery. Many of these pen style batteries can't output more than about 2.5 amps so the ohm cutoff would be higher than 1 ohm.

I found out has a minimum resistance of 1.0Ω So it wont work .
But my question still has not been answered .
I was told in e-mail that it would work fine and the website says it is compatible the Omega Oil Vaporizers which are just e-cig battries Or are they different?
 
Last edited by a moderator:
FUnhouse,

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Got the 8 I ordered. I was excited to try it out and then it wouldn't fire the alpha globe I ordered. Tried it in the core later that night, nothing. Took it apart and put it back together nothing. Adjusted the center pin and now it's perfect.
 

SamuraiSam

Extraction Technician
Thanks I will try to find out .
But Why would it work on you batteries and not mine ?
I have been told that it will work with no problems on your batteries. Which are pen style batteries?

I found out has a minimum resistance of 1.0Ω So it wont work .
But my question still has not been answered .
I was told in e-mail that it would work fine and the website says it is compatible the Omega Oil Vaporizers which are just e-cig battries Or are they different?
One thing you may not be considering is that not all products that look like, are alike. Not every electronic cigarette is created equal.

Oilvaporizer's Omega Vaporizers are specifically designed to power their high load cartridges. They use a high amperage discharge battery inside and have a low-ohm cutoff to match. They can fire a 0.6Ω load no worries. They're recharged with a micro USB port and not an eGo battery charger.

There may very well be other eGo batteries that have the same or better quality battery inside them than the Omega Vaporizers, and those batteries should be equally as capable (or better) of firing Oilvaporizer's cartridges. Most devices coming out these days seem to be capable of powering these devices, but we know that some entry level pens don't have the amp discharge to be compatible with our cartridges and coils.
 
SamuraiSam,

FUnhouse

Well-Known Member
One thing you may not be considering is that not all products that look like, are alike. Not every electronic cigarette is created equal.

Oilvaporizer's Omega Vaporizers are specifically designed to power their high load cartridges. They use a high amperage discharge battery inside and have a low-ohm cutoff to match. They can fire a 0.6Ω load no worries. They're recharged with a micro USB port and not an eGo battery charger.

There may very well be other eGo batteries that have the same or better quality battery inside them than the Omega Vaporizers, and those batteries should be equally as capable (or better) of firing Oilvaporizer's cartridges. Most devices coming out these days seem to be capable of powering these devices, but we know that some entry level pens don't have the amp discharge to be compatible with our cartridges and coils.

Hey @SamuraiSam
Thanks that's what I was looking for . I Was frustrated that I got another answer in a support e-mail from the site and just needed to confirm .
Thanks for the info !
 

420time

Well-Known Member
will there be a black friday sale for the site? also when will the kiss alpha dual globe coil be in stock?
 
420time,

DaNi_DuB

Vapor Enthusiast
What wattage is recommended for the alpha globe? Also, how much luck is everyone having with the dual coil ?
 
Last edited:
DaNi_DuB,

420time

Well-Known Member
just placed an order for the 5 dual alpha carts and a 510 mod ;D. so excited.

anyone have good recommendations for storing the 510 kiss alpha on the go? i was thinking one of those key chain pill stash or maybe a space case stash case.
 
Last edited:
Top Bottom