NewVape FlowerPot Twax Vaporizer

EmDeemo

Pastor for the Church of Stop Coughing since 1849
The terp pearls/SiC balls also zoom over the air intake holes, so they may be adding turbulence or having some affects on the incoming air from rolling over the carb cap holes? I dunno, spit balling... or SiC balling.

Anyway...

I tried again and spent a few days dabbing at 630f with 6 SiC balls. My lungs still cant hack it, it was fine for a few days but after that, lungs are complaining again, coughing a lot and not coping well.

Back down to 580 again. WHEN WILL I LEARN!?
 

okc0mputer

Well-Known Member
stands are us. welcome the new stand shell for our NV enail controller. This should reduce the clutter on the table.
you can use the avb can or not. I'm not sure why this design took so long to emerge.

https://www.newvape.com/single-pid-stand-3273

My biggest issue is my desk has abv all over it from emptying the bowl out using the round base/debowler that came with my combo, does this help keep things a little cleaner?
 

Zangano Cruel

Yerbasseur Grouch. PDX420. Giggler. IG zancru
Part of the family, in a little weekend gathering. Probably tonight, they’ll be showing off, at my LIVE IG @ zancru

Here’s a little Dracarys for you all, to enjoy.
Durban Poison landrace + Gelato wax/crumble, all this vaked to dark brown ABV.
Salud and enjoy.
Stay vaped.
 
Last edited:

YaMon

Vaping since 2010
Part of the family, in a little weekend gathering. Probably tonight, they’ll be showing off, at my LIVE IG @ zancru

Here’s a little Dracarys for you all, to enjoy.
Durban Poison landrace + Gelato wax/crumble, all this vaked to dark brown ABV.
Salud and enjoy.
Stay vaped.
NIce!!! How'd you come by an AM/PM stand?
 

Zangano Cruel

Yerbasseur Grouch. PDX420. Giggler. IG zancru
@Zangano Cruel your continued support for NewVape is just amazing.
@NewVape710 @newvape918 always a pleasure, to show off your innovations!!!
Keep them coming!!!
Sorry for crowding this nice forum, with my videos, displaying pure NV FP raw power, but it's so so nice,
I know I have my haters!!!!!!!
Specially "la armada"!!!!!! jajajajajajajajajajajaja
Here's another Wake & Vake, unplugged!!!!
Enjoy and stay vaped.
See you at my live IGs.
Laters....
First, knock off matrix perc, from 2014 I believe, broken downstem.... 18M glass and Ti bowls.
Microdoses of landrace Durban Poison and Lemon Pie flowers, WeedEater on glass bowl, SH on Ti bowl. Uncapped and minimum heat soaking bowl.
Second, real OG circa 2013?? Mobius Clear Matrix, double decker VROD 14M Ti bowl,
with Lemon Pie flower, plus Trinity diamantes en salsa dab on top,
paired with D-Cup Trinity diamantes en salsa dab.
All heads run at 666F, D-Cup at 555F.
 

Jblizz

Well-Known Member
In case anyone was interested in using their flowerpot on a 10mm rig with a glass bowl, I reached out to an American glassblower who is willing to do custom slides with a honeycomb screen for a very reasonable price. I posted it over at glass, but wanted to share here since it’s specifically for the flowerpot.

http://fuckcombustion.com/threads/10mm-glass-bowl-for-newvape-flowerpot.41351/

So just another option for us flowerpot owners.
 

Zangano Cruel

Yerbasseur Grouch. PDX420. Giggler. IG zancru
I saw 420 on that green controller in your video above (june 22) and was going to ask if that if that was in Fahrenheit because it seemed low for the amount of vape you got from the Weedeater
If you watch my second Wake & Vake, I was setting the time, 4:20!!! Jajajajajaja
That green box, is my first desktop vaporizer, an old school box vaporizer.
I broke the bowl/wand, that had a whip attachment. I believe it’s been retired, since I got my first Solo in 2012.
Nice times of discovery.
Stay vaped.
 
Out of interest, what reason do you have for large loads? That you dont wanna refill the bowl or that you have a fairly large tolerance?
Partial laziness i'll admit, from just having to reload so much. I figured this as much and have been backing off packing too much in and its been better.

I have been experimenting with the cap again and I can honestly say that if I start without the cap, then switch and finish the bowl with a cap, I get it toasted evenly with no ring. I think this working great for me at my temp of 580 and it seems like its getting a more even thorough extraction.
 

wildything

Well-Known Member
Hey @NewVape710 do you think it would be possible to make a glass bowl with no honeycomb screen and instead a divot to hold a Ti or SS screen? I was personally using a glass ice pinch style combustion slide with a screen in it and thought the flavor was still good but moved to the honeycomb exclusively since it supports the FP better.
 

PandaLee

Well-Known Member
glass bowl with no honeycomb screen
I think I'd like something like this to use for dabbing with the Vrod on a nice glass rig, rather than risk the titanium joint or using drop down/extension of some sort.

No need for the glass screen for dabbing (and if you use the Ti screen for flower because it's not as porous, the divots instead sound like a great idea). Plus, I think without the honeycomb screen fused in there, the bowl might be stronger. When mine broke, it was a clean cut right around the honeycomb attachment when I lifted my Vrod head off it.
 
Last edited:

invertedisdead

Defenders Of Glass
I think I'd like something like this to use for dabbing with the Vrod on a nice glass rig, rather than risk the titanium joint or using drop down/extension of some sort.

No need for the glass screen for dabbing (and if you use the Ti screen for flower because it's not as porous, the divots instead sound like a great idea). Plus, I think without the honeycomb screen fused in there, the bowl might be stronger. When mine broke, it was a clean cut right around the honeycomb attachment when I lifted my Vrod head off it.
If you want to protect a hand formed joint, you can use a 14mm to 10mm reducer with a 10mm bowl instead of a dropdown. This gives you the protection without adding any bulk to your rig. One of my FC homies used to do that with his Liger and HashMastaKut rig.
 

PandaLee

Well-Known Member
14mm to 10mm reducer
that recently crossed my mind too, since I have one for my vapcap. I'd just need to order a 10mm joint from NV.

I'll probably do both versions since they're easy. Going to wait a few days to see if there is any action on a "screen-less" glass bowl, and then go on and order a 10mm joint and some of the other little new things they recently released
 

EmDeemo

Pastor for the Church of Stop Coughing since 1849
Partial laziness i'll admit, from just having to reload so much. I figured this as much and have been backing off packing too much in and its been better.

I have been experimenting with the cap again and I can honestly say that if I start without the cap, then switch and finish the bowl with a cap, I get it toasted evenly with no ring. I think this working great for me at my temp of 580 and it seems like its getting a more even thorough extraction.
Excellent. Theres always a way round these things with the FP. Variable adjustment are a great feature. When I was doing flower, I'd be doing the same as you, trying to fill as much as possible while trying to not have any of the negatives that could bring.

Hey @NewVape710 do you think it would be possible to make a glass bowl with no honeycomb screen and instead a divot to hold a Ti or SS screen? I was personally using a glass ice pinch style combustion slide with a screen in it and thought the flavor was still good but moved to the honeycomb exclusively since it supports the FP better.
YES! I was after something like this, and eventually just knocked the honeycomb glass screen out of the bowl I had. An inelegant solution but it worked :D

Tho my goal was no screen at all seeing as I was purely dabbing.
 

Baron23

Well-Known Member
Uh....why not just get one of the existing available glass bowls with glass screen and put your SS or Ti screen on top of the glass one. I gather you are trying to keep more herb particles out of your rig?
 

newvape918

Company Rep
Company Rep
The difference is airflow. Two is the standard and for most uses, it will be more than sufficient. However, If you want to move 20 pearls in your dish (an exaggeration, of course....or is it?)... you may just need more power = more airflow = more holes.

That's my layman explanation. anyone care to add?

Hope that helps!


Hey guys, can someone explain the differences between the 1-4 carb hole options for the Vrod carb cap(other then more or less holes :)). Not sure which one to order.
 

EmDeemo

Pastor for the Church of Stop Coughing since 1849
Hey guys, can someone explain the differences between the 1-4 carb hole options for the Vrod carb cap(other then more or less holes :)). Not sure which one to order.
The difference is airflow. Two is the standard and for most uses, it will be more than sufficient. However, If you want to move 20 pearls in your dish (an exaggeration, of course....or is it?)... you may just need more power = more airflow = more holes.

That's my layman explanation. anyone care to add?

Hope that helps!
A 2 hole carb cap moves up to 6 terp pearls/SiC balls, with ease, in the VRod SiC dish.

A 1 hole cap is a nightmare to get any balls/pearls to move. A 2 hole carb cap is a nightmare to get 7+ balls/pearls to move.

6 balls/pearls fills half of the VRod SiC dish.

Thats all my findings I think? :)
 
Top Bottom