I'm wondering the same about the flavors. Trying to decide between blueberry or mint. Others seemed to have tried gummy bears but said it tasted more like grape.
My secret to THC E-Cig PG-Liquid... Potent, Effective, Cheap, Easy!!!
- Thread starter airwave
- Start date
I'm wondering the same about the flavors. Trying to decide between blueberry or mint. Others seemed to have tried gummy bears but said it tasted more like grape.
I'll post up how I like blue berry. Is original supposed to taste like weed? And is naked just ej flavor more or less? So maybe I could make blueberry blunt flavor by mixing these instead of other flavors I could have a bunch of tests if had all these. Make up a run with every flavor like big gulps back in the day. Maybe this is my solution 
Man I love this place. I see your post something more like this in my head. Sorry to edit you kinetics but you just gave me ideas and im vaped lol. 
Man I love this place. I see your post something more like this in my head. Sorry to edit you kinetics but you just gave me ideas and im vaped lol. 
StheDubya
Active Member
Original is weed like flavor. Naked is flavorless like ej but seems to mix better. Im digging the new 42 deg. flavor. Very smooth mint and leaves your mouth cool. I have most of the flavors but haven't tried all of the new ones. Never thought about mixing them before. Good idea. Their flavors are not really heavy like ecig juice and I like that. I heard it put best like when you get some bud and its blueberry whatever. It tastes like weed with a bit of blueberry. I think that's what they go for with their flaves.I'll post up how I like blue berry. Is original supposed to taste like weed? And is naked just ej flavor more or less? So maybe I could make blueberry blunt flavor by mixing these instead of other flavors I could have a bunch of tests if had all these. Make up a run with every flavor like big gulps back in the day. Maybe this is my solution
I have been paying more attention to my pairing. By pairing I mean trying to pick a good liquid flavor that matches up with my stuff I put in. To give an example, I got some CO2 oil that is hella citrusy and Im going to mix that with the Majic Dream soon. It creamsicle flavored. But when I have really pure shatters that are winterized and stuff I think they don't have much more than that thc/ hash taste and they go good with about any of them.
Neceros
Well-Known Member
I've done this, and it works well. I didn't use your recipe, though. I used 1 gram BHO / 1.5ml EJmix. Put stove on low (175f desired heat) so the water is simmering. If it's too hot the terpenes start to boil out.
Let it melt down into a nice golden liquid, and add in your EJmix. let it soak into the mix for a minute and stir, stir, stir. Stir a lot until it's completely integrated. Suck it up and distribute. You're done!
Let it melt down into a nice golden liquid, and add in your EJmix. let it soak into the mix for a minute and stir, stir, stir. Stir a lot until it's completely integrated. Suck it up and distribute. You're done!
Thanks for the K1 recommendation. I just purchased one and it works great so far on the Pure Gold capsules that I squeeze into the K1. Better than reusing the sapphire carts I got from prefills, definately a lot better air flow.
After I use up the Pure Gold, I'll be making my own with some Puff Majic and some CO2 wax.
So far no leaks either (even when travelling with it on a plane in my carry on).
StheDubya
Active Member
Nice. Good its workin for you. I have like 10 now I think.
OldOyler
Fire it again. I can still find the ground.
Hey everyone. Sorry, been absent with docs. Radiation has me a bit wiped still, so please excuse any very slow responses.
Hoping someone has some ideas on a question.
I use the same QWET-extracted oil for both sublingual and vape (just mix them differently at the end of the process), so it is fully decarbed by the time I am vaping.
Does anyone know if this would affect the temp (i.e. - voltage) I should vape at on my Kanger EMOW Mega? (Basically a 1.5 ml cart w/variable voltage).
I run it around 4.0 on my current batch of oil, but it *seems* that I should be able to go lower since I don't need to hit a certain temp for decarb. But I also get the feeling that I am missing something.
:-)
Peace to all!
Hoping someone has some ideas on a question.
I use the same QWET-extracted oil for both sublingual and vape (just mix them differently at the end of the process), so it is fully decarbed by the time I am vaping.
Does anyone know if this would affect the temp (i.e. - voltage) I should vape at on my Kanger EMOW Mega? (Basically a 1.5 ml cart w/variable voltage).
I run it around 4.0 on my current batch of oil, but it *seems* that I should be able to go lower since I don't need to hit a certain temp for decarb. But I also get the feeling that I am missing something.
:-)
Peace to all!
StheDubya
Active Member
Hey OldOyler, hope you feel better soon. I know that will take the wind right out of your sails real fast.
I think that EMOW uses the same coils as my aerotanks. I use a 1.5 ohm coil and usually set my batt to 3.6-3.8v . I think you can go lower than where your at for sure. My thought is that lower temps = better taste. You get a little higher a little quicker at 4 but I don't think its cuz it works better more just it delivers more vapor at the hotter temp. Sometimes I crank it up if I want 1-2 quick tokes but usually set mine lower and take 3-4. Lower temp gets me to the same place just tastes better. I think the coils last a while longer too.
I think that EMOW uses the same coils as my aerotanks. I use a 1.5 ohm coil and usually set my batt to 3.6-3.8v . I think you can go lower than where your at for sure. My thought is that lower temps = better taste. You get a little higher a little quicker at 4 but I don't think its cuz it works better more just it delivers more vapor at the hotter temp. Sometimes I crank it up if I want 1-2 quick tokes but usually set mine lower and take 3-4. Lower temp gets me to the same place just tastes better. I think the coils last a while longer too.
zor
Well-Known Member
Puff majic (gummy bears) mix and my w9 order of a kanger 2 tank arrived yesterday, so I prepared a batch with some Sour Lemon OG hash oil. Weighed out 1g of the oil, mixed it into 3mL of puff majic and heated the mixture slowly until the oil dissolved completely. I was only able to load 2mL of the mix into the tank, but after working out my technique on the omicron v2 it worked really, really well!
Neceros
Well-Known Member
When I use EJmix I have to use 1.5-2 ml per gram.
when you are melting the BHO DONT TOUCH IT. You could whip it up and make it take longer. Just let it melt. Put in your EJmix and then stir, stir, stir, stir. MAke sure your heat is at 175f as close as possible. Any lower and you won't mix well, and higher and it will boil off terpenes.
RollinCoal420
Member
Have any suggestions as to other atomizers that don't clog as quickly? Both my iSub and Arctic will clog both within a day or so also. They both also leak like a sieve, not with ejuice, just the weed juice.
Okay, so I am thinking about doing this soon. But I have one concern, a lot of people are saying use a 1:2 mix. But most of you are using a small tank that only will be used around 5 watts. What if you bump it to say a 1:10 mixture and put it in a nice tank and run it at 30+watts? I also see that people are saying their coils are getting gunked up, but wouldn't this mixture help that, and since you are vaping at such a higher wattage you are using more juice per puff and getting just as high as you would with a small tank.
Someone correct me if someone has already tried this, I haven't had time to read all the pages in this thread.
Also one other thing I think you guys should try looking into are using RDAs. I have successfully put dab on my coils and vaped it and got extremely high. I am just looking into this so that say I am going out for the day I can bring my THC vape tank and normal tank
Mod note: posts merged
Someone correct me if someone has already tried this, I haven't had time to read all the pages in this thread.
Also one other thing I think you guys should try looking into are using RDAs. I have successfully put dab on my coils and vaped it and got extremely high. I am just looking into this so that say I am going out for the day I can bring my THC vape tank and normal tank
Mod note: posts merged
Last edited by a moderator:
VapourHaze
Rexcornish on IG, Vaping since '02
Nautilus mini works well .. k1 is supposed to be good as well.
Striker Titan
New Member
Would one of you lovely people take a look at my method and tell me what you think.
Any suggestions welcome
AMT UNIT INGREDIENTS
5 gm. Plant material (flowers) - Ground
10 ml Propylene Glycol
1 ml Vegetable Glycerin
1 N/A 99% Isopropyl Alcohol
QTY KIT Comments
3 Mason jar with canning lid Ball mason jars
1 Strainer I use a nut milk bag
1 10 micron screen
1 Double boiler I use a 4 cup Pyrex and a 2 qt boiling pot
1 10 ml syringe with tip Medical grade.
1 Laser thermometer
1 1oz glass bottle with eye dropper.
1 Suspension system for the 1oz glass bottle. I use floss to hang the bottle. Go McGyver on it.
For clarification of the below ( 3 jars are used in total)
1st jar Extraction - Plant material goes in with iso
2nd jar Strain - Used with nut milk bag to remove most plant material. The 10 micron will be place on this prior to the product being transferred to the collection jar.
3rd jar Collection - Used to collect final pre purge solution.
PROCEDURES
1. In a 1 stage grinder. Coarse grind the plant material
2. Seal the plant material in a mason jar (extraction jar). Place the sealed extraction jar and the bottle of Isopropyl Alcohol in to the freezer for 24 hours.
2a. Prepare the (strainer jar) and the 10 micron screen for extraction.
3. Add Isopropyl Alcohol to the extraction jar until the plant material is fully submerged. Agitate the solution lightly for 10 seconds to ensure that all the plant material is saturated. Immediately return to the freezer for 5 minuets.
4. Dump the ISO/Plant material solution in to the strainer jar fitted with the nut milk bag.
5. Use a small amount of ISO to clean the extraction jar and dump this through the nut milk bag containing the plant material.
6. Do not squeeze the material in the strainer. Allow it to drip out until the liquid stops or the drips begin to take on a dark color.
7. Place the prepared 10 micron filter on the strainer jar. Place the jar upside down on to the collection jar and return to the freezer. Allow the solution to drip through.
8. Prepare double boiler. Water temperature to be at 150° - 185°. 150° is best for the initial phases
9. Remove the collection jar and place contents into the top of the double boiler
10. The ISO will slowly evaporate off time will depend on temperature/atmospheric pressure/quantity of solution.
11. As the solution boils down you will begin to notice micro bubbles in the oil. These are small amounts of ISO that need to be purged. The boiling point of ISO is 180° You will need to agitate the oil to release all of the bubbles. (This is time consuming but necessary). Once the oil is maintaining 180° and not producing micro bubbles the process is complete.
12. Remove the top of the double boiler.
13. Reduce water heat to its lowest setting.
13. Add 10 ml of Propylene Glycol to the extract .
14. Add 1 ml of Vegetable Glycerin to the extract.
15. Mix the PG/VG/Oil solution until the water has stabilized at its lowest setting. This may require scraping the dry/hard oil off of the bottom of the container.
NOTE: The end result may have a chunk of oil that does not seem to dissolve. This is ok it will break down during suspended decarb.
16. Return the purge container to the double boiler. Set it on an edge so you can collect any remaining solution.
17. Transfer the solution and any remaining oil collections to the 30 ml apothecary bottle
NOTE: The following step is the decarboxylation process. Some decarb has already take place during the purge. However exact ratios are impossible to determine at the moment. By preforming a post production decarb the product ends with a golden color instead of the traditional green brown.
18. Suspend the apothecary bottle in the water (220°) for up to 45 minuets agitating every 15.
Optional Ultra sonic bath
19. Remove the bottle from the suspension and submerse in an hot water Ultra sonic bath for up to 15 min.
This is the result of several variations on my method. I would truly appreciate any tips/ tricks/ education on better practices.
Any suggestions welcome
AMT UNIT INGREDIENTS
5 gm. Plant material (flowers) - Ground
10 ml Propylene Glycol
1 ml Vegetable Glycerin
1 N/A 99% Isopropyl Alcohol
QTY KIT Comments
3 Mason jar with canning lid Ball mason jars
1 Strainer I use a nut milk bag
1 10 micron screen
1 Double boiler I use a 4 cup Pyrex and a 2 qt boiling pot
1 10 ml syringe with tip Medical grade.
1 Laser thermometer
1 1oz glass bottle with eye dropper.
1 Suspension system for the 1oz glass bottle. I use floss to hang the bottle. Go McGyver on it.
For clarification of the below ( 3 jars are used in total)
1st jar Extraction - Plant material goes in with iso
2nd jar Strain - Used with nut milk bag to remove most plant material. The 10 micron will be place on this prior to the product being transferred to the collection jar.
3rd jar Collection - Used to collect final pre purge solution.
PROCEDURES
1. In a 1 stage grinder. Coarse grind the plant material
2. Seal the plant material in a mason jar (extraction jar). Place the sealed extraction jar and the bottle of Isopropyl Alcohol in to the freezer for 24 hours.
2a. Prepare the (strainer jar) and the 10 micron screen for extraction.
3. Add Isopropyl Alcohol to the extraction jar until the plant material is fully submerged. Agitate the solution lightly for 10 seconds to ensure that all the plant material is saturated. Immediately return to the freezer for 5 minuets.
4. Dump the ISO/Plant material solution in to the strainer jar fitted with the nut milk bag.
5. Use a small amount of ISO to clean the extraction jar and dump this through the nut milk bag containing the plant material.
6. Do not squeeze the material in the strainer. Allow it to drip out until the liquid stops or the drips begin to take on a dark color.
7. Place the prepared 10 micron filter on the strainer jar. Place the jar upside down on to the collection jar and return to the freezer. Allow the solution to drip through.
8. Prepare double boiler. Water temperature to be at 150° - 185°. 150° is best for the initial phases
9. Remove the collection jar and place contents into the top of the double boiler
10. The ISO will slowly evaporate off time will depend on temperature/atmospheric pressure/quantity of solution.
11. As the solution boils down you will begin to notice micro bubbles in the oil. These are small amounts of ISO that need to be purged. The boiling point of ISO is 180° You will need to agitate the oil to release all of the bubbles. (This is time consuming but necessary). Once the oil is maintaining 180° and not producing micro bubbles the process is complete.
12. Remove the top of the double boiler.
13. Reduce water heat to its lowest setting.
13. Add 10 ml of Propylene Glycol to the extract .
14. Add 1 ml of Vegetable Glycerin to the extract.
15. Mix the PG/VG/Oil solution until the water has stabilized at its lowest setting. This may require scraping the dry/hard oil off of the bottom of the container.
NOTE: The end result may have a chunk of oil that does not seem to dissolve. This is ok it will break down during suspended decarb.
16. Return the purge container to the double boiler. Set it on an edge so you can collect any remaining solution.
17. Transfer the solution and any remaining oil collections to the 30 ml apothecary bottle
NOTE: The following step is the decarboxylation process. Some decarb has already take place during the purge. However exact ratios are impossible to determine at the moment. By preforming a post production decarb the product ends with a golden color instead of the traditional green brown.
18. Suspend the apothecary bottle in the water (220°) for up to 45 minuets agitating every 15.
Optional Ultra sonic bath
19. Remove the bottle from the suspension and submerse in an hot water Ultra sonic bath for up to 15 min.
This is the result of several variations on my method. I would truly appreciate any tips/ tricks/ education on better practices.
Striker Titan
New Member
I have found a similar issue with all prebuilt coils. I use the Kayfun Mini V2.1. I build my on coil with 28 gauge Kanthal @ 1.5 Ohm. The key is the wick READYxWICK™ from RBA supplies. If you havent seen the youtube video of a clean off burn you need to check it out.
Xyon
New Member
Hi everyone. New here. And thanks for such great info.
:-)
On top of everything I learned here so far, I think I have (mentally) the tools I need to make this happen and start enjoying this fantastic way to (stealthily) vape and medicate.
In reading and researching, I found this stuff (www.kleenxtract.com) and am wondering if this would be good to use instead of Everclear for winterizing?
:-)
On top of everything I learned here so far, I think I have (mentally) the tools I need to make this happen and start enjoying this fantastic way to (stealthily) vape and medicate.
In reading and researching, I found this stuff (www.kleenxtract.com) and am wondering if this would be good to use instead of Everclear for winterizing?
StheDubya
Active Member
The Aspire K1 works great. Totally reliable totally leak free since I have been using them.
If your one of those ppl looking to make huge clouds of vapor that might work good but really what works best for nicotine vapes doesn't necessarily work great for weed vapes. I think most people are probably looking for something a little more on the down low than that. I can medicate pretty much everywhere I go but it sure would attract a bunch of attention if I was blowing clouds in the grocery store or the mall. And totally don't want the house fogged out like a vape shop.
Gunked up coils are usually from too thick of a liquid or really waxy concentrates. Most ecig stuff cant handle it well.
Dabbing on RDAs is ok but def not on the down low and that kind of stuff is way more than needed with weed juice. I have bought a couple and don't use them. Just my opinion though. If I want to dab I just use a good globe on a pen. Liquids work better in a good small clearo.
I think it looks like good stuff but after talking to some people in another thread it sounds like Everclear is just as good if you can get it. A lot of places don't allow it so I think that is who is buying the kleen extract.
MrHendricks
Member
Hi All - just picking up on the e-juice thing and am very excited as the ability to puff away without a soul knowing is f'ing cool. Initially just had a Vapoursson e-cig from Amazon which showed enough promise to get me interested so have now just got an Aspire Atlantis so will be giving that a go tomorrow. Hopefully it's a bit more hard hitting than the smaller vapoursson.
My biggest problem with juice is microscopic particulates left behind that slowly clog the wicking so I picked up a vacuum filter flash and what a world of difference. If your making your own juice I highly recommend using a vacuum filter- right now Im using the subox mini with no complaints- if your using just a vg bass I would recommend staying around 10-11 watts if your using the 1.5 ohm atty
Striker Titan
New Member
Would you elaborate on the vacuum filter and the method you are using. Im wondering if flash should have been flask and in that case I assume you are using a Buchner flask/funnel. I am curious to know at what psi you are operating at and what micron screen you are using. I have been using a 10 micron stainless steel mesh filter allowing my QWISO to drip through. While this is very clear there is still some particulate left in the final ejuice.
Last edited: