NizzyJones
Well-Known Member
Yeah, I think even packing half the available area in the stem was pushing my luck. Depends on grind size too.
Discontinued MistVape Touch
- Thread starter mistvaporizer
- Start date
@Jah1975 I have measured the amps and when the unit is cold it pulls 7 amps, once warmed up it pulls 4 to 5 amps. @ghost See www.mistvaporizer.com/instructions there is a battery section and it lists all the batteries testers have said they used.
vapen00b
Many vapes & accessories. Always happy to help
Wow.. That's a pretty strong batt for an Air. Hope you don't break it over time by using those. HG2 is definitely highly recommended for vapes like MVT, Mi, FW4.
Jah1975
Well-Known Member
Its the same strength as any other battery. The mah is just the capacity (how long it will last discharging 1 milliamp). It still puts out only up to 4.2 volts, just like any other non-protected 18650. The amp limit, (its a limit, not production) is actually lower than a sony vct4 (20 amps vs 30 amps continuous) The air has lasted almost 2 years now on nothing but HG2's
In other words, a battery puts out volts only, amperage and mah are capacities
Awesome, thanks for the quick response! that's low amperage, great!
Last edited by a moderator:
vapen00b
Many vapes & accessories. Always happy to help
Yeah, thanks, I know that. Maybe my wording was not spot on. I just remember a lot of debate back in the days in the Air thread about particular Air batt specs etc where ppl were encouraged to stick with OEM only to play it safe. If you've been going like that for 2 years, you might know better what's ok for your device.
Jah1975
Well-Known Member
I remember there being a big hoopla when I first got my Air about no other battery working properly or that other batteries would damage the unit. I think it was so people would buy extra batteries from Airizer instead of cheaper places and also probably a bit so that people wouldn't buy crappy bulk batteries from china and give the vape a bad name when they went into thermal runaway.Yeah, thanks, I know that. Maybe my wording was not spot on. I just remember a lot of debate back in the days in the Air thread about particular Air batt specs etc where ppl were encouraged to stick with OEM only to play it safe. If you've been going like that for 2 years, you might know better what's ok for your device. Your choice
smokey_da_vape
Well-Known Member
Just recieved my mvt from @Justpassedu, from a trade and holeh this thing packs a punch. I combusted with my first bowl but I'm slowly getting the hang of it. Any tips from mvt owners would be great. Until then I'm piling up the avb trying to tame this wild beast.
PPN
Volute of Vapor
I would like to help you but I'm still in order to learn how to use it perfectly since it is hotter and faster. I got more scortching issue than with the beta version and even an hot spot, rotate and stir are more necessary as well.
When I don't rotate with the cooler beta version I got a dark circle and yellow at the center, with the production unit I got a black spot on a side(?) and the rest is more yellow/green ....
Keeping some distance between the lips of the gong and your load can help, I noticed too the more charged your battery is more you have to pay attention to load size/packing/heating time/speed inhale. In another hand if too much depleted you'll have to pre heat around 4-5s before to start to inhale....yes that's unregulated!
Although most of the time I experiment great taste and clouds, maybe i'm a bit nostalgic but I'm still in favor of the beta Touch, it feel a bit tastier to me.
StonerSloth
cui bono?
RelaxedNow
Well-Known Member
Yes, there is a hot spot. I haven't tried the two-screen method, as it isn't a big deal to me, but it seems those who have tried this are happy with the result. @mistvaporizer wrote something about it, not far back in this thread.
On another note, I've had a heck of a cold, and haven't vaped in nearly a week. I'm beginning to feel better, and I'm thinking the break is going to do wonders for my tolerance. I almost can't wait to find out! Also, I haven't used my MVT in two weeks, as I was on a cruise last week. Downside was that I left some half-used CO2 oil cartridges on the ship, to avoid taking them through U.S. Customs on the way home. Oh well, better safe than sorry.
Crussell27
Fellow vapor brother
RelaxedNow
Well-Known Member
I've also been using an @Alan turbo tube as well. Great to roast a whole nuglet and for a WPA.
Are you saying this eliminates the hot spot? Also, does it not require a second screen? TIA
Crussell27
Fellow vapor brother
I'd say it helps. Because there is a set screen at the end of a glass tube, then a nice length of silicone as the bowl. I add a top screen as well. Helps to make a tasty bake.
it doesn't require the double screen. None of them actually do.
RelaxedNow
Well-Known Member
Ok, I need to try a turbo tube. I also need a wood stem, and I want to try a long glass stem. I'll have to take a few minutes and get all 3 ordered soon.
It's a good month, in terms of the ol' bills, so I might even order another vaporizer that I've been interested in. I just used the MVT after that two-week break, and I still love it, but I also still have that urge to try another. I kinda feel like I'm being unfaithful though. Don't be mad at me. I'm sold on convection, so I promise I won't buy a conduction vape.
It's a good month, in terms of the ol' bills, so I might even order another vaporizer that I've been interested in. I just used the MVT after that two-week break, and I still love it, but I also still have that urge to try another. I kinda feel like I'm being unfaithful though. Don't be mad at me. I'm sold on convection, so I promise I won't buy a conduction vape.
vapen00b
Many vapes & accessories. Always happy to help
Ok, I need to try a turbo tube. I also need a wood stem, and I want to try a long glass stem. I'll have to take a few minutes and get all 3 ordered soon.
It's a good month, in terms of the ol' bills, so I might even order another vaporizer that I've been interested in. I just used the MVT after that two-week break, and I still love it, but I also still have that urge to try another. I kinda feel like I'm being unfaithful though. Don't be mad at me. I'm sold on convection, so I promise I won't buy a conduction vape.
Yeah, loving the MVT and those wood stems rock!
What particular convection vape are you about to buy? Let me guess, the tubo??
RelaxedNow
Well-Known Member
Yeah, loving the MVT and those wood stems rock!
What particular convection vape are you about to buy? Let me guess, the tubo??
And we have a winner!
vapen00b
Many vapes & accessories. Always happy to help
And I gladly pass you the prize money to buy that sweet thing and support another great FC manufacturer!
MVT and tubo is a great combo!
muunch
hotboxing the cockpit
Liking it so far from the 2 stems I was able to run thru before work. I actually don't like how close the screen is to the heater with the stock stem so I've been using the @DDave tapered ones that i put the screens a little further up in.
is it possible for the screen above the coil to get dislodged?
is it possible for the screen above the coil to get dislodged?
@muunch happy you are liking the Touch so far, yes you can dislodge the screen above the heater. Please see http://www.mistvaporizer.com/instructions and under maintenance there is note about the screen. To clean it use a small brush and gently brush away any debris. The force needed to dislodge the screen is about 45 grams so it won't just pop out but you can dislodge it if you are not careful. It is one of the weak points of this design. I only had one user dislodge the screen and have issues. @Vape Dr. actually removed the screen, adjusted his coil and put the screen back. I don't recommend this however.
There are over 50 Touch units out there and the screen is holding fine. I am looking at getting a custom female stem made but so far I am concerned that the quality won't be good enough. I had some samples made (in China) and they looked good but they totally screwed up a crucial measurement and the minimum order is 1000 pcs so I don't trust them. If there are any expert glass people here hit me up, I am interested in talking.
There are over 50 Touch units out there and the screen is holding fine. I am looking at getting a custom female stem made but so far I am concerned that the quality won't be good enough. I had some samples made (in China) and they looked good but they totally screwed up a crucial measurement and the minimum order is 1000 pcs so I don't trust them. If there are any expert glass people here hit me up, I am interested in talking.