Dear Members,
I want to introduce you to the latest product from Lookah, the new Seahorse X wax pen.
The Seahorse X wax pen is probably the most versatile vape device Lookah has ever created.
This mission with this vape was to create one device that could be an enail, dab pen, wax pen, and cart pen all in one.
We even made it so you can connect a bubbler (included in the kit) or a third part bubbler to have water filtration on the device. Also, you can use the same silicone hose that comes with the seahorse pro to connect to a water pipe.
This design is a first for combining all the features of an electronic nectar collector with an enail and packages them in one superbly sleek design. To give better control of the vapor creation, the Seahorse X has a built-in airway valve that can be used as a carb cap on any of the setups.
How To Use the Seahorse X Vape Pen
Like all the Lookah devices this has a standard 5 button click to turn it on or off.
Once the device is powered on, you can press the button twice to select one of the three output settings, which adjust the voltage from Low, 3.2V, Medium, 3.6V, or High 4.1V.
With the temperature set, you can choose from manual mode or session mode.
The manual mode allows up to 20 seconds of continued heating.
The session mode performs a 15 second preheat then fires up for 30 seconds for multiple hits.
The Wax Pen Setup
The kit includes two cups that screw directly into the upper housing. The included glass mouthpiece or water bubbler can easily slide over the atomizer cup allowing the device to be used as a wax pen.
If you have your own glass bubbler from similar wax pens, then there's a good chance it will work with the Seahorse X by using one of the two threaded attachments. This maximizes the Seahorse X compatibility with a range of third-party glass from other propriety devices.
The Nectar Collector Setup
With a 510 thread adapter, the Seahorse X can be used as a honey straw device connecting any of the three types of Seahorse coils of your choice: quartz tip, ceramic tip, or the new quartz tube.
When used as a honey straw, the glass mouthpiece or water bubbler fits directly onto the lower end of the device. You can also directly attach the mouthpiece end to a water pipe or use the included whip and 14-18mm adapters.
It comes with an all-new Lookah Seahorse type III coil. This new tip is an electrically heated nectar collecting tube made from two layers of quartz covering the coil. As the coil heats up, the tube will vaporize concentrates, turning them into vapor without creating any burnt taste.
The Enail Setup
In the enail setup, you can connect the Seahorse X in the wax layout directly to your water pipe. Just use the included 14mm joint connecter or attached the included whip and adapter to fit 14/18mm female joint pipes.
If you're using the nectar collector layout, then the whip fits onto the lower end of the device with the joint connector or through the glass mouthpiece.
As always, if you would like any more info or have any questions, please message me or email us at support@lookah.com
The Seahorse X is priced at $149.99 USD
The Kit comes with
1 Seahorse X
1 Tip/Coil Cover
1 Seahorse Tube Tip
1 Seahorse Quartz Tip
1 Wax cup
1 Glass Mouthpiece
1 Glass Bubbler
2 Stand/Bases
1 Joint Connector
1 510 Thread Adapter
1 Dab Tool
1 Connection Hose
1 14/18mm Hose Adapter
1 User Manual
1 Cleaning Brush
1 USB Cable
I want to introduce you to the latest product from Lookah, the new Seahorse X wax pen.
The Seahorse X wax pen is probably the most versatile vape device Lookah has ever created.
This mission with this vape was to create one device that could be an enail, dab pen, wax pen, and cart pen all in one.
We even made it so you can connect a bubbler (included in the kit) or a third part bubbler to have water filtration on the device. Also, you can use the same silicone hose that comes with the seahorse pro to connect to a water pipe.
This design is a first for combining all the features of an electronic nectar collector with an enail and packages them in one superbly sleek design. To give better control of the vapor creation, the Seahorse X has a built-in airway valve that can be used as a carb cap on any of the setups.
How To Use the Seahorse X Vape Pen
Like all the Lookah devices this has a standard 5 button click to turn it on or off.
Once the device is powered on, you can press the button twice to select one of the three output settings, which adjust the voltage from Low, 3.2V, Medium, 3.6V, or High 4.1V.
With the temperature set, you can choose from manual mode or session mode.
The manual mode allows up to 20 seconds of continued heating.
The session mode performs a 15 second preheat then fires up for 30 seconds for multiple hits.
The Wax Pen Setup
The kit includes two cups that screw directly into the upper housing. The included glass mouthpiece or water bubbler can easily slide over the atomizer cup allowing the device to be used as a wax pen.
If you have your own glass bubbler from similar wax pens, then there's a good chance it will work with the Seahorse X by using one of the two threaded attachments. This maximizes the Seahorse X compatibility with a range of third-party glass from other propriety devices.
The Nectar Collector Setup
With a 510 thread adapter, the Seahorse X can be used as a honey straw device connecting any of the three types of Seahorse coils of your choice: quartz tip, ceramic tip, or the new quartz tube.
When used as a honey straw, the glass mouthpiece or water bubbler fits directly onto the lower end of the device. You can also directly attach the mouthpiece end to a water pipe or use the included whip and 14-18mm adapters.
It comes with an all-new Lookah Seahorse type III coil. This new tip is an electrically heated nectar collecting tube made from two layers of quartz covering the coil. As the coil heats up, the tube will vaporize concentrates, turning them into vapor without creating any burnt taste.
The Enail Setup
In the enail setup, you can connect the Seahorse X in the wax layout directly to your water pipe. Just use the included 14mm joint connecter or attached the included whip and adapter to fit 14/18mm female joint pipes.
If you're using the nectar collector layout, then the whip fits onto the lower end of the device with the joint connector or through the glass mouthpiece.
As always, if you would like any more info or have any questions, please message me or email us at support@lookah.com
The Seahorse X is priced at $149.99 USD
The Kit comes with
1 Seahorse X
1 Tip/Coil Cover
1 Seahorse Tube Tip
1 Seahorse Quartz Tip
1 Wax cup
1 Glass Mouthpiece
1 Glass Bubbler
2 Stand/Bases
1 Joint Connector
1 510 Thread Adapter
1 Dab Tool
1 Connection Hose
1 14/18mm Hose Adapter
1 User Manual
1 Cleaning Brush
1 USB Cable