JoDa Glassworks

[Melting Pot]

Got my first nano in today

Fiddleback Walnut. I love how dark the wood is!

It is WAYYYYY smaller than I thought. I opened the box and was like, aww this thing is cute, now where's the real one

I guess I never knew the dimensions and I always thought it was much bigger than the Solo.

So you can probably tell how surprised I was when it was about an inch shorter than my Solo

I've got a 14mm gong on the way from EV to hold me over until I get my Mega Mai Tai Joda carbed gongs

Me being a dumbass and not looking up a tutorial on how to use it, I loaded the herb on the top side of the screen (I didn't want herb to fall out of the stem and get on the nano heating element) and put it on the nano and took a big draw and got a mouthful of cannabis funny but not very tasty

Round 2: I now loaded it the right way this time and gave it a good draw before I put it on the nano to make sure the herb doesn't fall onto the heating element. It worked much better compared to round 1 lol.

Still, I can't wait to get my gongs and use it inverted

Here's a little trick if u have 18 Female joint slide the nylon in the middle of stem drop down in water piece enjoy !!!!!
I've done it with Gb-187

 

[BoogerMan]

Here's a little trick if u have 18 Female joint slide the nylon in the middle of stem drop down in water piece enjoy !!!!!
I've done it with Gb-187

My mouthpiece stem doesn't have any nylon on it. I got the nano used in the classifieds so maybe it just didn't come with mine

 

[SSVUN~YAH]

My mouthpiece stem doesn't have any nylon on it. I got the nano used in the classifieds so maybe it just didn't come with mine

You can use silicone and fold it over if necessary. Nice lookin Nano bud! I'm firing both of mine up now in your honor!

 

[Melting Pot]

My mouthpiece stem doesn't have any nylon on it. I got the nano used in the classifieds so maybe it just didn't come with mine

On my solo I would take surgical gloves cut fingers off and use them rubber bands work be creative have fun.
I'm a slow typer I don't care.
U gotta be fast around here.
@SSVUN~YAH is a ninja

 

[BoogerMan]

You can use silicone and fold it over if necessary. Nice lookin Nano bud! I'm firing both of mine up now in your honor!

Awesome thanks! I think I have a silicon ring laying around or some non toxic vinyl tubing I use with my volcano that might fit. Time to play around with some stuff until my gongs get here.

On my solo I would take surgical gloves cut fingers off and use them rubber bands work be creative have fun.
I'm a slow typer I don't care.
U gotta be fast around here.

Thanks man! I have some gloves I can cut up

I am going to try and MacGyver up something soon!

EDIT:

Well the Nano has be pretty vaked

One bowl, 4 large hits, set at 6.5 (or maybe it was 7 lol). This thing is awesome!

I used a hookah hose grommet for the 14mm female joint and a hookah hose grommet+bowl grommet for the 18mm female joint.

I don't really have anything to rig it up to a male joint, or maybe I do? I'll look around more. I call it Nano Science

The mouthpiece stem actually makes a sorta seal on the 14mm female joint without the grommet. This is good to know in a pinch

Anyways, thanks for the ideas @SSVUN~YAH and @Melting Pot!

I can't wait for my Joda gongs! They will make this thing even better!
I need to order a steamroller too. I wish I had a money tree

EDIT 2:

Concentrates are next on my to do list. I don't have any cotton and my Herbalizer SS pads aren't here yet so I'm going to have to figure something out…

Pics:

 

[PoopMachine]

@VaPeD&CoNfUsEd , check your PMs, homey. Im not feeling the love

 

[smokum]

@PoopMachine

He's probably too busy bomb-proofing my Int'l shipment and just figured out that he can't ship it like he said because it's Good Friday

 

[SSVUN~YAH]

The Post Office is closed today? Uh oh I've been telling people I can ship today in classifieds!

 

[Melting Pot]

The Post Office is closed today? Uh oh I've been telling people I can ship today in classifieds!

Dude you haven't been lying. You can still ship. Like usual the USPS fumbles again. Ball on Field
Sure everyone knows you're awesome reputation as a stand up guy. You can go ahead and sit down post office closed. Sorry

 

[Delta3DStudios]

The office may be closed, but mail is certainly being delivered!
When I need to ship a package and the PO is already closed, I take mine to the Staples around the corner from my house - they take USPS and UPS packages now

 

[PoopMachine]

Post office is open today. I have a package coming from @Ed's TnT and it shows out for delivery today.

 

[DieHard]

Today is not a Federally recognized holiday. My mail has been delivered today,

 

[VaPeD&CoNfUsEd]

Bahahaha!!! I woke up thinking the same thing! Then I saw the post lady come by. smfh. Waking up at 8 tomorrow just to go ship guys. Sry. You can blame Ms JoDa though. She comes out to my shop at 4 this morning and says "wtf r u doing? The post office isn't even open tomorrow!" So I shut down and came in. Now she may need a slap! Lol. Jk I don't beat my girl. Even though there's times I'm positive it's warranted. Lol

 

[BoogerMan]

Bahahaha!!! I woke up thinking the same thing! Then I saw the post lady come by. smfh. Waking up at 8 tomorrow just to go ship guys. Sry. You can blame Ms JoDa though. She comes out to my shop at 4 this morning and says "wtf r u doing? The post office isn't even open tomorrow!" So I shut down and came in. Now she may need a slap! Lol. Jk I don't beat my girl. Even though there's times I'm positive it's warranted. Lol

As long as it's with an open hand it isn't abuse right?

 

[VaPeD&CoNfUsEd]

As long as it's with an open hand it isn't abuse right?

That's what I'm sayin! Lol

 

[PoopMachine]

Someone asked about the length of my dropdown earlier. I measured it tonight. from end to end including the reclaim adapter, its 6 3/4 inches

The piece its on is nasty as shit but Ill post a picture later.

 

[stickstones]

so that's when flaccid?

 

[VaPeD&CoNfUsEd]

Now that's funny right there! ^^

 

[PoopMachine]

so that's when flaccid?

LOL.. something like that. I would recommend making the next one with an 18mm male joint at the lower dropdown so you can run the InfiniTI nails down lower to concentrate the reclaim closer to the dish.

 

[SSVUN~YAH]

its 6 3/4 inches

so that's when flaccid?

For some reason this reminds me of @ACE OF VAPE signature here:

 

[ChippyMalone]

@BoogerMan if you think the dimuitive size of the E-Nano was disconcerting upon arrival, I challenge you to order @vapman . Even though I knew the actual dimensions, this little wood chip looked like a joke when I opened up the Easter Egg to find such a tiny little thing inside.

@VaPeD&CoNfUsEd I received my package from you yesterday. I adore the GonG for my DHGate alien raygun bubbler. It functions perfectly and is such a stylistic perfect match for the piece. When I feel good enough and have time, I will post an awesome photo.

Thanks again!

 

[BoogerMan]

@BoogerMan if you think the dimuitive size of the E-Nano was disconcerting upon arrival, I challenge you to order @vapman . Even though I knew the actual dimensions, this little wood chip looked like a joke when I opened up the Easter Egg to find such a tiny little thing inside.

@VaPeD&CoNfUsEd I received my package from you yesterday. I adore the GonG for my DHGate alien raygun bubbler. It functions perfectly and is such a stylistic perfect match for the piece. When I feel good enough and have time, I will post an awesome photo.

Thanks again!

Lol I know what you mean. I have a Lotus which I think are similar in size to the vapman right? Tiny! But portable so I guess that's how they can be so small.

I just never expected a plug in vaporize to be as small as the nano

 

[SSVUN~YAH]

Lol I know what you mean. I have a Lotus which I think are similar in size to the vapman right? Tiny! But portable so I guess that's how they can be so small.

I just never expected a plug in vaporize to be as small as the nano

Wait til you get a HI or UD!

 

[BoogerMan]

Wait til you get a HI or UD!

Are they even smaller? Seriously? I thought they were bigger. Ahh looks I might need one of each!

 

[ChippyMalone]

Lol I know what you mean. I have a Lotus which I think are similar in size to the vapman right? Tiny! But portable so I guess that's how they can be so small.

I just never expected a plug in vaporize to be as small as the nano

I know. Maybe if @ACE OF VAPE could have come up with a better name than E-Nano, perhaps something that suggested it might be small, we might not be so surprised when we open that box. Ha!