JoDa Glassworks
- Thread starter VaPeD&CoNfUsEd
- Start date
I just got my HI GonG rig today. I went no carb because that's just how I roll. 
Thanks for the bonus dabber, @VaPeD&CoNfUsEd !
Thanks for the bonus dabber, @VaPeD&CoNfUsEd !
Mr. Gweilo 420
Dude
Thats really nice. The work on that dabber is sick!I just got my HI GonG rig today. I went no carb because that's just how I roll.
Thanks for the bonus dabber, @VaPeD&CoNfUsEd !
Ha! I just found this photo and realized this is the exact one you sold me last week. I love it.
I've got another Koa wood E-Nano on the way and was thinking my wife might want to buy me some nice glass from you for Christmas.
I'm going through this thread to find ideas for what I want, but I am imagining a Hawaiian lava theme. Maybe a stem with bumpy black texture and glowing orange/red lava oozing out? Does that give you any ideas?
That'd be cool. There is actually a red/orange color named lava.
My steamroller for my solo arrived in perfect condition. Very clean and I love the black accents. Thanks a lot, @VaPeD&CoNfUsEd!
Looks good on there. I love the way black and clear look together.
stickstones
Vapor concierge
Thought my Joda GonG looked nice loaded up with a donut of hash.
Reflections
Well-Known Member
OMG !!! I just got my order from Joda and I love love love the aromatherapy cup and MY NEW STEM!!!
Does a Happy Dance !!! You went way above and beyond...Thank you so much I cant stop vaping,,
just to use it!!
Does a Happy Dance !!! You went way above and beyond...Thank you so much I cant stop vaping,,
just to use it!!
Melting Pot
Sick & Twisted
Pics please
Yeah. I actually didn't get a chance to snap a pic of either of those aroma cups.
herbivore21
Well-Known Member
@VaPeD&CoNfUsEd
I am looking to get someone to make me a boro (or if required, quartz) adapter to connect my sublimator heater directly to my oil rig. This heater gets hot, and is a chunk of titanium - as such, it would be good to have a little bit of space between the boro directly touching the heater and the boro directly touching the piece so as not to put too much heat into my oil rig. It will need to have a female 18mm GonG joint on it to connect to my 18mm male di oil rig.
I will not be leaving the heater on top of this all the time, but it will need to withstand the heater sitting on it while I take a dab. The boro connection to the sub will have to be well molded to the shape of the dabmaster heater so that the heater sits in a firm and secure way in the adapter. I can't have a heater falling out of it's receptacle whilst dabbing lol.
Do you think you can do this? I will need super thick, super strong glass. I'd love to get some worked stuff done on it, but not if it compromises the function of a sturdy joint to connect my sub heater directly to oil rig for dabs.
By the way, long time no speak around these parts, hope all is well!!
Here is a picture of me doing what I want to do but using a clumsy 18mm f-f adapter with an 18mm combustion slide (The slide is not a good solution because the heater must be held in place with one hand! The shape of the inside where the sub heater sits is smooth, curved glass which makes the sub not sit snug and fall out!):
Ideally, I would want the heater to be connecting lower down, around the height of the middle joint on the 18mm f-f adapter as pictured. Please let me know if you could help me here and how best to get the measurements required
I am looking to get someone to make me a boro (or if required, quartz) adapter to connect my sublimator heater directly to my oil rig. This heater gets hot, and is a chunk of titanium - as such, it would be good to have a little bit of space between the boro directly touching the heater and the boro directly touching the piece so as not to put too much heat into my oil rig. It will need to have a female 18mm GonG joint on it to connect to my 18mm male di oil rig.
I will not be leaving the heater on top of this all the time, but it will need to withstand the heater sitting on it while I take a dab. The boro connection to the sub will have to be well molded to the shape of the dabmaster heater so that the heater sits in a firm and secure way in the adapter. I can't have a heater falling out of it's receptacle whilst dabbing lol.
Do you think you can do this? I will need super thick, super strong glass. I'd love to get some worked stuff done on it, but not if it compromises the function of a sturdy joint to connect my sub heater directly to oil rig for dabs.
By the way, long time no speak around these parts, hope all is well!!
Here is a picture of me doing what I want to do but using a clumsy 18mm f-f adapter with an 18mm combustion slide (The slide is not a good solution because the heater must be held in place with one hand! The shape of the inside where the sub heater sits is smooth, curved glass which makes the sub not sit snug and fall out!):
Ideally, I would want the heater to be connecting lower down, around the height of the middle joint on the 18mm f-f adapter as pictured. Please let me know if you could help me here and how best to get the measurements required
Honestly bud, I may not be the guy for that job yet. I'd almost have to have the sub to be able to make sure I had a good fit before shipping. Sure would be nice if it was the same size as an 18mm joint or something. That'd make shit a lot easier.
herbivore21
Well-Known Member
Hmmmm, the sub heater would fit pretty snug in a slightly bigger than 18mm female gong joint. In fact, the atomizer that the sub heater sits in during normal operation is a 25mm female joint.
I actually may have access to a 3d scanner which could give us exact dimensions. I wonder if there is some way I could give this information to you? I am sure boro will be just fine, this slide works; only it doesn't hold the sub heater in place - it is just not deep enough so the heater tips out.
I actually may have access to a 3d scanner which could give us exact dimensions. I wonder if there is some way I could give this information to you? I am sure boro will be just fine, this slide works; only it doesn't hold the sub heater in place - it is just not deep enough so the heater tips out.
Reflections
Well-Known Member
ok some pics of my bad ass stem Joda just made me...sorry not real clear pics..just had my pc camera
and a couple of my aromatherapy cup.. I havent tried it yet but will let yano how well it works when I can
Sorry if to many pics I love both !!! Thanks so much Joda for the excellant pieces!!!
and a couple of my aromatherapy cup.. I havent tried it yet but will let yano how well it works when I can
Sorry if to many pics
I love both !!! Thanks so much Joda for the excellant pieces!!!
Reflections
Well-Known Member
yep and it is awesome..love the glowing eyes
Speaking of eyes. Here's a cool one I sold at an art show over the weekend.
Amber purple iris. Baller tech lids.
Amber purple iris. Baller tech lids.
blankrider
Well-Known Member
Hey @VaPeD&CoNfUsEd any word on those quartz swings?
Typical china shipping bullshit. I believe they are in customs now. So... Soon. Fingers crossed.
Metal screen only.
Aww... ok thanks!