JoDa Glassworks

syrupy

Authorized Buyer
@syrupy I've made 2 dishes that were simple and I never took pics. I'm working on 2 more this week that are super heady and I'll be sure to post pics. I'm not trying to ignore anyone at all. You're always welcome to pm me about anything. Whether it's for a purchase or just to bullshit.

Hey that's really appreciated. I can see your glass game stepping up in just the short time since this thread started. If you keep your business game growing near the rate of your skill with glass, then we'll be saying, "I knew that dude way back in '14"...

I'd wish you best of luck, but as much as you love this stuff, you probably don't need it. I'm putting together a proposal I can PM you for what I'm thinking. Some of the dabber work might be tough as far as having points that are long and thin. If there's anything there that doesn't feel like a good fit just let me know. Nobody wins when putting an artist into water they don't usually tread.

That's a very generous offer you made @Ratchett, and useful for me. I'm finally learning to really spend time envisioning what I want. For instance, the marble on that stopper posted above looks a little small to me. However, I'm sure if I had ordered it, it would have come out the same way, because I never used to specify. Now I know, if I'm ordering a stopper made, to specify that the marble is 1 inch. I'm glad for your post @Ratchett because I hadn't thought about requesting a certain size of marble, but I will from now on instead of assuming.
 

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
Yeah when people want to place an order I always let them know if it's something I'm not comfortable with attempting with my limited skill set. Often times I'll refer them to a more experienced artist that can for sure do what they want.

Just wait... In a couple of weeks when my big rental torch comes in, shit is going down!!!!!
 

Delta3DStudios

Well-Known Member
Accessory Maker
@Ratchett the marble is small because I can't work very large solid pieces on my tiny little torch. Hollow is a different story. I didn't realize the ill gangster lean. If your unhappy feel free to send it back and I'll pop you a new one out.

By no means am I unhappy enough to ship anything back! Thanks for the offer though!
 

blankrider

Well-Known Member
@syrupy I've made 2 dishes that were simple and I never took pics. I'm working on 2 more this week that are super heady and I'll be sure to post pics. I'm not trying to ignore anyone at all. You're always welcome to pm me about anything. Whether it's for a purchase or just to bullshit.

@Ratchett the marble is small because I can't work very large solid pieces on my tiny little torch. Hollow is a different story. I didn't realize the ill gangster lean. If your unhappy feel free to send it back and I'll pop you a new one out.
It makes me happy to read this kind of stuff. Totally awesome that you take time to respond to us in a timely manner. Both publicly and privately!

Also super cool of you to be willing to refund or replace things for customers.

It blew my mind when you sent me the spoon stem for free and said pay if I like it. Paid the second it came just out of respect. Spoon is really cool too.

Everyone 3 cheers for @VaPeD&CoNfUsEd !
He fucking deserves it
 

Delta3DStudios

Well-Known Member
Accessory Maker
Just an update/observation on the Joda GONGS

I'm LOVING this 19mm Gong more than the thick Adjust-a-stem 19mm GONG from EpicVape. After a few weeks with the EV stem, this JODA stem seems to heat up faster than the super thick glass on the EV gong, and I'm loving the colors!

Note my 14mm JODA and 14mm EV stems perform about the same, there was no noticeable difference in performance

I'll wait for him to get caught up on things before I place order #3 :D
 

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
Claisen! Claisen! I don't need no stinking Claisen!!!

Threw this little prototype gong together today in about 5 minutes. I gotta say it's a great success. Clears perfectly with zero blowback.

cueJnu1.jpg


And here's today's warm up pendant.

B2RSORx.jpg


Like 5 or 6 different techniques on that one!
 

flotntoke

thoroughly vaped
Claisen! Claisen! I don't need no stinking Claisen!!!

Threw this little prototype gong together today in about 5 minutes. I gotta say it's a great success. Clears perfectly with zero blowback.

cueJnu1.jpg


And here's today's warm up pendant.

B2RSORx.jpg


Like 5 or 6 different techniques on that one!


Loving both!! Great work on pendant and nice idea for carbed GonG!

Wondering if there could be any way to put a spring-loaded type seal or valve in there. Is early with no vape for me this morning, so imagination is lacking. But will be thinking about it... How cool would it be to have an automatic seal you just have to push briefly to open airflow?
 

420time

Well-Known Member
got my stem and carb gong, only thing is its way too hard fitting the stem in. i think getting a gong for solo without the thick lip and itll fit in a pnp pretty well.
 
Last edited:
420time,

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
I make them fit tight but not too tight. Have you tried it with the solo already heated up?
 
VaPeD&CoNfUsEd,

420time

Well-Known Member
great thing about the stem and gong the screen is movable to make smaller size bowls, enough for 2-3 big heavy hits.
 
420time,

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
Ok guys finally just got in on some of the hottest colors about to hit the market.

First we have northstar glass' "Green Revenger"
Like slyme but much more vibrant
S0uES29.png


And my personal new favorite TAGs "Pink Slyme"
Like green slyme but pink and purple hues.
Can be worked milky and semi opaque
nhmOgCT.jpg

..... Or more transparent.
AesVwGM.jpg

So get ur orders in because these are both still experimental colors that get released in incredibly small batches that are few and far between.

(Not my art in the photos)
 

DieHard

Accessory supplier
Accessory Maker
Ok arm twisted... I am awaiting my new Solo. I am thinking a "spoon stem". In the transparent style "pink slyme" ( and maybe contrasting colors)with a carb hole. I want it to come off the Solo at a slightly upward angle rather than at 90 degree. Like this.
iBGUxSl.jpg
 

flotntoke

thoroughly vaped
You can do a set primarily for a solo that will work for a nano, right?

Need some of the pink-urple tranparent-ish!
 
flotntoke,

VaPeD&CoNfUsEd

JoDa Glassworks
Glass Blower
I'm working on getting a new size for the solo/nano stems I can't get them consistantly enough.
 
VaPeD&CoNfUsEd,
Top Bottom