Discontinued Impcognito
- Thread starter mistvaporizer
- Start date
Obsessed 2
Well-Known Member
@mistvaporizer , wanted to reach out with a follow-up inquiry on this. Are you still planning to sell just the bodies? Btw, i am in love with your Imp
paytonpenn
Level 30 Nature/Healer
Can you rephrase that, it's hard to understand?
Power mode works with Tubo firmware no config needed but TCR is easy to do if you have Tubo compatible device. TCR is notably better experience than power in my experience and based on conversations with others.
muunch
hotboxing the cockpit
@mistvaporizer , wanted to reach out with a follow-up inquiry on this. Are you still planning to sell just the bodies? Btw, i am in love with your Imp
Hopefully so - I am planning on ordering another deck once I have some money in my pocket again.
Getting great results with the Aster RT on Arctic Fox firmware - I much prefer it to the stock firmware it comes with.
edit:
Forgot to mention; I tried testing the battery life with AF firmware on the Aster and was able to get an amazing amount of bowls.
I think 10~16 is definitely a reasonable number to expect.
Last edited:
Obsessed 2
Well-Known Member
Yes bodies are $60, either style, I haven't put them in the store yet but message me if you want one.@mistvaporizer , wanted to reach out with a follow-up inquiry on this. Are you still planning to sell just the bodies? Btw, i am in love with your Imp
Obsessed 2
Well-Known Member
Sweet! Thank you kindly.
muunch
hotboxing the cockpit
GoldenBud
Well-Known Member
How the base, with the coil, looks like? if you can take a pic
muunch
hotboxing the cockpit
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
muunch
hotboxing the cockpit
Well you might as well show it all together on your mod too
I use it most often with the glass short stem, no beads, and wood mouthpiece.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I use it most often with the glass short stem, no beads, and wood mouthpiece.
Nice!
I was going to grab an ASTR for mine to do the compact side by side, but I do already have a CuboidMini with TuboFW (the software I prefer ideally)
btw is it really okay yo have the Imp set for 70w max like the Tubo?! Or have you not tweaked those settings? I'm not sure how these coils are for power
muunch
hotboxing the cockpit
hehehehe that was before I set it up. I run both mods at 30-35W in TC
I don't mind using AF on the Aster. Tubo firmware is definitely preferred but not a dealbreaker. I like the form of the Aster RT way better.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
hehehehe that was before I set it up. I run both mods at 30-35W in TC
I don't mind using AF on the Aster. Tubo firmware is definitely preferred but not a dealbreaker. I like the form of the Aster RT way better.
Good to know! So I'll need an Aster then, I think lowest price was already shared in here... Gonna order bloodwood imp soon
muunch
hotboxing the cockpit
@muunch thanks for sharingis the aster pocketable ?
Imo, yes.
I'm wearing khaki golf-like shorts today and while you can sorta tell there's 'something' in my pocket, from the slight lump, but it's not large enough where someone would be like "uhhh what's in there?"
I could post a pic of myself, with it in my pocket, but that seems odd
Last edited:
What is the D setting. I get P, I and a place for a Range value.
Does anyone know about Red Panda? I just downloaded the latest NFE tools and there is Arctic Fox and Red Panda. Haven't googled it yet.
Hippie
Well-Known Member
Red Panda is Arctic Fox for devices with the compatible chip with the colour screen
( Joyetech Espion and the Wismec Ravage230 )
Arctic Fox and Red Panda manual
https://docs.google.com/document/d/1uF5xCzg-8LqbiCwom5oKJWhIBnt7COsrCWytwYN5Yfk/mobilebasic
( Joyetech Espion and the Wismec Ravage230 )
Arctic Fox and Red Panda manual
https://docs.google.com/document/d/1uF5xCzg-8LqbiCwom5oKJWhIBnt7COsrCWytwYN5Yfk/mobilebasic
muunch
hotboxing the cockpit
I noticed the Aster RT only has settings for P and I.
D I'm assuming means derivative, but I'm also a noob.
I still need to mess more with settings on the Aster, but aside from flashing AF, I have kept all settings stock
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Finally got my order in, bloodwood with the dosing stem to match and a wpa.
Working on the Aster RT, eleaf only has white and green left, cheap but too ugly for me (there's an eBay seller with white for only $20 even) I found the grey on AliEx for $28-33, but with the long shipping etc. Someone else on eBay has a used silver one that I can get for $40 picking it up in person, so probably should do that, but now I am wary even if it was hardly used, fixed internal battery bought over a year ago, who knows how well battery is now? Worth paying more to get it right away, in an okay color, but not being able to baby it from new? Hmm
Working on the Aster RT, eleaf only has white and green left, cheap but too ugly for me (there's an eBay seller with white for only $20 even) I found the grey on AliEx for $28-33, but with the long shipping etc. Someone else on eBay has a used silver one that I can get for $40 picking it up in person, so probably should do that, but now I am wary even if it was hardly used, fixed internal battery bought over a year ago, who knows how well battery is now? Worth paying more to get it right away, in an okay color, but not being able to baby it from new? Hmm
incognito mode engaged.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Met up with @mistvaporizer to pick up my new Impcognito in person, tried out a lot of vapes and a lot of fresh strains! Very impressed with how tiny and effective this thing is, but need to get it dialed in for my Cuboid. Used your settings above, but not sure about M value, 75 was too hot and 205 still not quite right yet... Lot of testing ahead
Edit: that was with my cold resistance (aka tubo) improperly set to .240 bc it was already warm. Got it set properly now at .225 and so far so good at 350F, may need to readjust that M1 value now...
Last edited:
muunch
hotboxing the cockpit
In my experience, higher cold ohms = higher required TCR#
I believe one of my buddies settled at TCR200 but his cold ohms were like 0.22
I prefer around TCR180~ but my cold ohms are closer to 0.200
These values can also vary from mod to mod, and Imp to Imp I am sure. I'm not meaning to imply my settings are 100% great but they seem to be a decent enough starting point.
With my PID settings completely stock on the Cuboid Mini (I unfortunately forgot to check these before firing) I got a fucking WILD glow within my first hour with the Imp. Adjusting those PID values and literally not touching anything else fixed those issues