Discontinued Imp by MistVape

almost there

Well-Known Member
Works very well with DNA75C. Using the SS 316MPL material setting I get excellent vape with a range from 360°f to about 395° for full extraction.
Very similar to the other box mod attys, just with the smaller load size and much smaller footprint overall.
Mine did not come with a screen over the heater, but Dave sent me out one along with the wood collar. I know the wood collar come standard now, not sure about the coil screen.
I've been tinkering with the Fury 2 dosing caps and they fit in the wooden mouth piece up to the lid. It doesn't seat tightly cause of that, but it works well.
Shots of the Imp on the Purple Ostrich Therion.

2s96kbs.jpg



2v7t8as.jpg
Does your theme work well? If so can you please post the link to the theme you are using?
 
almost there,
  • Like
Reactions: SloJimFizz

Sativapo

Well-Known Member
Nice cover design. Stays simple but gets wavy ! And more aerodynamic.
I don't know if it's s a possible feature or has any drawbacks but I think the base could use a second o-ring for more stability and portability.
 
Last edited:

SloJimFizz

Unknown Member
Does your theme work well? If so can you please post the link to the theme you are using?
Here is the theme I've loaded. Chose this one cause it seemed to be the one most downloaded and is updated frequently.
Everything I want on the screen is there and I can do any changes I want right on the main screen. A lot of different color versions, and different languages available as well.
I haven't really checked to see if any of the other materials available would be more accurate, temp wise than the SS316MPL is. Perhaps, just happy as it is, so I've yet to try further testing. Just entered the material setting, let the mod read the ohms of the Imp, and that was it. It was ready to roll.
 

almost there

Well-Known Member
Here is the theme I've loaded. Chose this one cause it seemed to be the one most downloaded and is updated frequently.
Everything I want on the screen is there and I can do any changes I want right on the main screen. A lot of different color versions, and different languages available as well.
I haven't really checked to see if any of the other materials available would be more accurate, temp wise than the SS316MPL is. Perhaps, just happy as it is, so I've yet to try further testing. Just entered the material setting, let the mod read the ohms of the Imp, and that was it. It was ready to roll.
Thanks man! It’s so funny, this was the same theme I was using for months with herbie’s Fcshare and I was having a lot of issues but I love all the tweaking and live info so I made it work. Recently I was using stock dna theme and seeing your photo made me want to check out what you’re using:lol:. Anyway I don’t know if it was the new service pack or the link you sent but I’m very grateful to have a working paranormal and keep the theme I love. Thanks for the link!

The new shape of the imp looks very impressive. Any non-microdosers here? I would love to hear your perspective if you like to share:wave:.
 
Last edited:

Improvaper

Well-Known Member
I like this new design!

Finally I have to agree my "load in the body" mod doesn't taste as good as the "load in the stem" original method... so I'm going back to load my stem to enjoy tasty clouds through my Imp.

Yeah, I can't get that to taste good, either, so it's not just you.

I've lowered all my stem screens to the bottom to make for smaller packs. It means reloading more often, but better flavor and more even AVB.

Next experiment will be Argo stems, when they arrive. i am really intrigued to go screenless in the stem. The caps for on the go are a nice touch, also.
 

mistvaporizer

Well-Known Member
Manufacturer
DD5-D670-B-2-CFB-4-AE0-AEB9-A914-EACE1950.jpg

New look shipping soon. All orders through and including 283 will ship tomorrow
B2-BA7-D6-A-1-C59-4-B6-E-948-E-4747-BF12-E310.jpg

The electrodes are gold plated now.
All current orders should ship by mid next week

@Improvize it is 1.56" high and 1" diameter. Only the betas were a bit shorter.
There is no stain that is all natural bocote sealed with mineral oil and carnuba wax
 
Last edited:

dagfp

Well-Known Member
Only the betas were a bit shorter.

Wow those curves definitely make it stand out compared to other 510 vaporizers. Looks like the indents from the cooling stem inspired the aesthetic. Does the new shape affect the vapor quality compared to the previous design?

Does the new gold plated deck and bottleneck shape signify the end of the "prerelease" models, or are there going to be further revisions before it's finalized?
 

mistvaporizer

Well-Known Member
Manufacturer
Wow those curves definitely make it stand out compared to other 510 vaporizers. Looks like the indents from the cooling stem inspired the aesthetic. Does the new shape affect the vapor quality compared to the previous design?

Does the new gold plated deck and bottleneck shape signify the end of the "prerelease" models, or are there going to be further revisions before it's finalized?
Well it is a production model but if i can make it better i will.
 
Hey guys, any other suggestions to clean out the Cooling Stem besides iso or stem milk? I really dislike milk and I don't have any iso handy. I know I know, but I might puke if I try the milk. My stem is pretty dirty.
 

SloJimFizz

Unknown Member
Hey guys, any other suggestions to clean out the Cooling Stem besides iso or stem milk? I really dislike milk and I don't have any iso handy. I know I know, but I might puke if I try the milk. My stem is pretty dirty.

No one has iso handy till they buy some. :p
91% iso is available at Target, supermarkets, pharmacies.....
 

Improvaper

Well-Known Member
So I've been experimenting with my Youcan Evolve Plus battery for a low-profile option to use with the Imp. It's a little unwieldy, but once you get a feel for the pulse timing, it delivers pretty solid hits. Only problem is sitting it down without fear of knocking it over or rolling it off the table.

Well, my creative wife solved that issue nicely. Fun little package!

 

GoldenBud

Well-Known Member
Hey guys, any other suggestions to clean out the Cooling Stem besides iso or stem milk? I really dislike milk and I don't have any iso handy. I know I know, but I might puke if I try the milk. My stem is pretty dirty.

Water and dish soap works for sure,
I think that vinegar can work too, not sure about it 100%
 
So I've been experimenting with my Youcan Evolve Plus battery for a low-profile option to use with the Imp. It's a little unwieldy, but once you get a feel for the pulse timing, it delivers pretty solid hits. Only problem is sitting it down without fear of knocking it over or rolling it off the table.

Well, my creative wife solved that issue nicely. Fun little package!

You should post that over at r/Glorp. Haha don’t really do that.
 
alleyhoops,
Top Bottom