Herb Grinders

snackmaster

Well-Known Member
Or grind into an herb dish, which is how I'll use it for at home sessions.

Wish they'd make a concave bottom section to make it a standalone 3-piece. Or even a reducer funnel kinda thing so you can pair it with a classic. I might be alone here but I've never put ground herb in my satchmos, only classics and sometimes chicos.
 

paytonpenn

Level 30 Nature/Healer
Most of the major brands offer "small" models (usually 1.25" or 1.5").

And then there's this one...
https://www.getpensimple.com

I haven't heard much talk about it, but it does look like a cool way to grind and dispense herb into a small chamber like a log stem or a Vapcap tip.
Please make sure you save your money and avoid it. I highly recommend the Chewy 2 which grinds better and imo dispenses better as well.

 

muunch

hotboxing the cockpit
Wish they'd make a concave bottom section to make it a standalone 3-piece. Or even a reducer funnel kinda thing so you can pair it with a classic. I might be alone here but I've never put ground herb in my satchmos, only classics and sometimes chicos.


I agree - @JyARz

right now I'm using one satchmo solely as a grinder, but it's not my favorite to get ground weed out out of, and the funnel for the classic does require some finesse if you wish to completely avoid spillage.

Standalone grinder sized chico sounds soooo nice.

I would absolutely buy a concave bottom for this. Either that, or a funnel attachment for chicos/classics. Right now it works good enough though. I'm just paranoid about flakes getting between the glass and the shell, but no biggie.
 
Last edited:

analytika

Well-Known Member
Most of the major brands offer "small" models (usually 1.25" or 1.5").

And then there's this one...
https://www.getpensimple.com

I haven't heard much talk about it, but it does look like a cool way to grind and dispense herb into a small chamber like a log stem or a Vapcap tip.
Nice find. Similar to my concept, but appears to be the firehose/megadose version, not the microdose version. :bang:
 
analytika,

muunch

hotboxing the cockpit
The Jyarz grind has a lot of unbroken Calyxes it looks like, reminds me of the grind that my Space case offers.

It's quite nice so far and seems to be pretty consistent. It does take some turning and nudging in order to get some material to fall through, and some also seems to get stuck on the little foam piece on the bottom, but it's not too big of a deal.

@snackmaster @JyARz so far what I've been doing is just relegated my black satchmo to be the "grinder" satchmo and my blue will be for indica whole nugs, and orange for sativa whole nugs. Just have this lid laying around, but no biggie I guess. It is nice to have glass storage for ground nug. Pretty much minimal contact with anything but glass for your bud! (if you store in mason jars or whatever i guess)

And it's not too bad to get the ground herb from the satchmo to a classic, if you take the glass of the classic out. There's always some ground herb stuck on the satchmo glass but oh well.

Yeah, so far so good though. I sold my other grinders anyway.
 

Friend Man

Well-Known Member
Alright, it's been a long time since I posted, but I have to give an update on the SLX:

I haven't cleaned it in about 6 months! With no loss of performance. It's now working exactly as intended, it never gunks up and hardly anything gets left behind. I'm a believer!
 

lazylathe

Almost there...
That's very different from my experience with ryot this past week. I had the elastic web panel peel off of my axe bag. They sent me another bag. I asked them for a different model and they agreed! They have awesome service in my experience. Send them another email maybe they send you a replacement now!

I know the way i typed it sounded like it was a short time frame...
I emailed them for 3 months...They were very nice about the whole thing but it does not fix the grinder.
It's all good, my new one works awesome! I would buy from them again, no hard feelings only a bit disappointed.
I just love it's fine, even grind and that it is 3 piece!
 

szai

Well-Known Member
I know the way i typed it sounded like it was a short time frame...
I emailed them for 3 months...They were very nice about the whole thing but it does not fix the grinder.
It's all good, my new one works awesome! I would buy from them again, no hard feelings only a bit disappointed.
I just love it's fine, even grind and that it is 3 piece!
Yeah it's an impressive grinder my favorite too! I've noticed it grinds very fast with minimal twisting.
 
Hi I was looking to get the best grinder to use with a S&B mighty vapourizer, for a slightly course grind to work with the dosing capsules, I done some research and many vouch for the

Space Case Titanium Grinder -Medium 4 Piece
http://www.spacecasegrinders.com/space-case-grinder-titanium-4-piece-small-magnetic/

I think that website above is an official distributor, as the company is quite hard
to buy from I don’t think they deal with the public directly
and there are many fakes on the market.

Here is a good guide to tell the difference between authentic and counterfeit.
https://slickvapes.com/blogs/news/11-ways-to-spot-a-fake-space-case-grinder

So would this be the best grinder for the job or do the experts in here recommend something else for the task?
 
Homefoodhealth,
  • Like
Reactions: Jill NYC
Many would swear by the acrylic grinder that comes with the mighty.
I have grinders that I use with some vapes and not others.
I use a Santa Cruz Shredder for the Mighty.

I will look up the Santa Cruz vs Space case, also many people discontinued use of the S&B grinder due to micro plastic particles breaking off in the grind and going missing, common experience with acrylic grinders.
 
Homefoodhealth,

gonzorelli777

Vape virgin
Hi I was looking to get the best grinder to use with a S&B mighty vapourizer, for a slightly course grind to work with the dosing capsules, I done some research and many vouch for the

Space Case Titanium Grinder -Medium 4 Piece
http://www.spacecasegrinders.com/space-case-grinder-titanium-4-piece-small-magnetic/

I think that website above is an official distributor, as the company is quite hard
to buy from I don’t think they deal with the public directly
and there are many fakes on the market.

Here is a good guide to tell the difference between authentic and counterfeit.
https://slickvapes.com/blogs/news/11-ways-to-spot-a-fake-space-case-grinder

So would this be the best grinder for the job or do the experts in here recommend something else for the task?
Sup man, Space Case official website is simply www.spacecase.com, they sell directly from Cali. Believe me, I went through a lot to find this information out lol...They are pretty friendly when it comes to dealing with customers on their Facebook and Instagram. Their Fb is https://www.facebook.com/space.case.grinders.usa/, and they actually have an official rep here on FC. They just haven't been around here in a while, but they seem to be on FB daily.

Their medium 4pc is somewhere between coarse and medium grind, works great with the Firefly 2 but that is the only vape I've ever tried so I can't say how the grind would suit many other vapes.

Good luck!
 
Sup man, Space Case official website is simply www.spacecase.com, they sell directly from Cali. Believe me, I went through a lot to find this information out lol...They are pretty friendly when it comes to dealing with customers on their Facebook and Instagram. Their Fb is https://www.facebook.com/space.case.grinders.usa/, and they actually have an official rep here on FC. They just haven't been around here in a while, but they seem to be on FB daily.

Their medium 4pc is somewhere between coarse and medium grind, works great with the Firefly 2 but that is the only vape I've ever tried so I can't say how the grind would suit many other vapes.

Good luck!

Excellent find I will put my order in thank you!
 

Mr.Sifter

Well-Known Member
I have gone through 3-4 S&B grinders and have never experienced a part of the teeth cracking out.
Its a very good grinder.
 
Mr.Sifter,
  • Like
Reactions: Vitolo

Vitolo

Vaporist
I have gone through 3-4 S&B grinders and have never experienced a part of the teeth cracking out.
Its a very good grinder.
Agreed.
Acrylic Grinders can be made cheaply... some of regular Plastic, but The S&B grinder is made of stronger materials.
Still not my favorite grinder, but I do keep 2 S&B Herb Mills. One large and one regular.
 
Vitolo,
Sup man, Space Case official website is simply www.spacecase.com, they sell directly from Cali. Believe me, I went through a lot to find this information out lol...They are pretty friendly when it comes to dealing with customers on their Facebook and Instagram. Their Fb is https://www.facebook.com/space.case.grinders.usa/, and they actually have an official rep here on FC. They just haven't been around here in a while, but they seem to be on FB daily.

Their medium 4pc is somewhere between coarse and medium grind, works great with the Firefly 2 but that is the only vape I've ever tried so I can't say how the grind would suit many other vapes.

Good luck!

Just to confirm

e00b5y.png


a9s0fo.jpg


Please note the website is not currently able to process international orders at this time but you can contact customer support via email or phone and complete an international order with them, I’m currently waiting for them to send me an invoice to complete an international order myself.

Contact information
https://spacecase.com/index.php?route=information/contact

Facebook
https://www.facebook.com/pg/space.case.grinders.usa/about/?ref=page_internal

Instagram
https://www.instagram.com/space.case.grinders/

Website
https://spacecase.com/products

Customer service email
Warranty@spacecase.com

Space case custom work

13zskfn.png


xn94di.png
 
Last edited:
Top Bottom