Healthy Rips FURY EDGE

L

Lavendersage

Well-Known Member
Aezhenn said:
Hey guys , I would like to introduce you a glass and wood stem for the fury edge.
As some of you may know, I am a wood guy. But I really like all glass air path.
So I work with Glass Charlie to combine the best of both worlds.

The fury edge is a pretty good little vape and I would like to bring it a touch of wood, a way to personnalize it even more...

20210104_163548.jpg



20210104_163606.jpg



The glass tube is 6cm long , so the wood stem is around 3,7cm long.
Easy to clean, you even dont have to pull it away from the wood (but you can if you want to): a qtip or a paper towel soaked can easily go in the glass tube.

Here's some of the available stems:

20210125_162145[1].jpg


From left to right:

- zebrano with turquoise inlay
-red amboyna burl with bronze inlay 1
-red amboyna burl with bronze inlay 2
-philippine ebony , amboyna burl with alu accents
-two tones cocobolo

I hope you will like them! Please let me know your thoughts!

:)
Click to expand...
How does one go about purchasing? How much are they?

thrl said:
I have an idea that can help to protect device - even if we use the glass mouthpiece - similar to the retail silicone cap; I made a mockup in 3D.
Also attached a photo from the location of the "edge wear" (terrible pun, I know), most likely I scratched the surface when cleaned it.
The coating is flawless except that part where chipped down, but it bugs me every time I see it.

ps: I'm ok with the (matte) acrylic paint, if it is more durable 😊
Click to expand...
Did you actually make these tops? I wish I could do stuff like this!
 
thrl

thrl

Well-Known Member
These are "virtual", but yeah, I measured everything and modeled the device in Cinema 4D, and rendered the image with Redshift.
The scale is almost 1:1.
I want to make a 3d printed mold later and create a "prototype" for myself with food grade silicon, but don't know where to start 😅 yet.
 
N

no_higher_ground

New Member
Hello, all. I received my Fury Edge with a set of capsules last week. It's my first vape and I'm really happy with it.

I'm going to be placing another order soon for a WPA and either a bent stem or the 3D flow stem. Any reason to prefer one over the other, besides the obvious shape difference?

Also, does anyone know if there's a difference between the capsules HR sells for the Edge and the ones POTV sells for the One?
 
L

LooseCucumber

Well-Known Member
I've had my edge for about ten weeks now and I'm not wild about it. The airflow and hits are quite good, I love the size of the unit, but I find the flavor to be lacking. Perhaps this can be avoided my switching mouth pieces (I'm almost certain it's the o ring that taints the flavor). I own a 3D stem and a WPA so I may switch MP's but this decreases the portability of this unit. I will say I've had good experiences micro dosing with the Fury 2 WPA (presumably bc of no o ring)
 
B

bosscib

Well-Known Member
no_higher_ground said:
Hello, all. I received my Fury Edge with a set of capsules last week. It's my first vape and I'm really happy with it.

I'm going to be placing another order soon for a WPA and either a bent stem or the 3D flow stem. Any reason to prefer one over the other, besides the obvious shape difference?

Also, does anyone know if there's a difference between the capsules HR sells for the Edge and the ones POTV sells for the One?
Click to expand...

I bought the Hula Stem V2 XL and really like it - it's a perfect fit for the Edge. I rarely ever use the stock mouthpiece. I've been thinking about buying the mini bubbler too.
 
C No Ego

C No Ego

Well-Known Member
Just bought a new Edge vape ... have three going now in rotation and just bought a back up in case the vape ban Fucks up this opporunity as well ... What a Fucke up mess . get you Vapes while you can
 
Skinku

Skinku

Well-Known Member
GetLeft

GetLeft

Well-Known Member
Went to pick up some o-rings and screens for my Edge and figured to make it worth my while I'd pick up an extra bubbler just in case. I've been relying pretty consistently on my Edge recently. No o-rings still out of stock. Guess I'll miss the 15% off opportunity!
 
GetLeft,
  • Like
Reactions: BigJr48
F

falcopus

Well-Known Member
Hello,

I am a blind person and I just bought the Fury Edge on Vapefulle with a discount of 20%. The dosing capsules were not in stock. So I hope I can use it without the capsules in the beginning.

I hope I can ask my questions here when I receive the device.
Just already some questions:
- How do I change from to °C and will the device vibrate when I do this?
- When I sttart the device (trippel click) it automatically heats up? and what temperature does it take the first time?
- What is the lowest temperature? This way I know how many times I have to push the up button to go to a specific temperature?
- Can someone describe the device a little bit so I know where the turn on button and the + en - buttons are located.


Thanks
regards
 
Jill NYC

Jill NYC

Portable Hoarder
falcopus said:
Hello,

I am a blind person and I just bought the Fury Edge on Vapefulle with a discount of 20%. The dosing capsules were not in stock. So I hope I can use it without the capsules in the beginning.

I hope I can ask my questions here when I receive the device.
Just already some questions:
- How do I change from to °C and will the device vibrate when I do this?
- When I sttart the device (trippel click) it automatically heats up? and what temperature does it take the first time?
- What is the lowest temperature? This way I know how many times I have to push the up button to go to a specific temperature?
- Can someone describe the device a little bit so I know where the turn on button and the + en - buttons are located.


Thanks
regards
Click to expand...
I will answer what I can. Hopefully @HealthyRips.com can chime in with what the initial temp setting is.

- to change from F to C you need to hold the power button and the - button simultaneously for 2 seconds. (The top and bottom buttons)
- turn it on by clicking the power button 3 times and it will immediately start heating to whatever the last temp you set it at.
- the lowest temp is 280 F (138 C). personally, I like to start somewhere around 365 F (185 C). It can go as high as 430 F (221 C). I tend to not go higher than about 410 F but it is up to you!
- The stem/mouthpiece is on the top next to the display screen which slopes down a bit. The power button is below the slope and is bigger than the temp buttons. The temp buttons are below the power button - the + button above the - button.

Hope that helps and let us know how it goes!!
 
C No Ego

C No Ego

Well-Known Member
falcopus said:
Hello,

I am a blind person and I just bought the Fury Edge on Vapefulle with a discount of 20%. The dosing capsules were not in stock. So I hope I can use it without the capsules in the beginning.

I hope I can ask my questions here when I receive the device.
Just already some questions:
- How do I change from to °C and will the device vibrate when I do this?
- When I sttart the device (trippel click) it automatically heats up? and what temperature does it take the first time?
- What is the lowest temperature? This way I know how many times I have to push the up button to go to a specific temperature?
- Can someone describe the device a little bit so I know where the turn on button and the + en - buttons are located.


Thanks
regards
Click to expand...
you can either hold the up heat button or down heat button for a while to make it go th either the lowest setting or highest setting and then count down from there to reach the start out temp you want ... as @Jill NYC mentions starting around a set heat point is what most people gravitate towards and then temperature increase from there until that particlular load is not producing vapor anymore ... you can use a bubbler or water piece to help condition the vapor especially for using th higher heat setting on there like over 400 F etc....... ther is a water pipe adapter that comes with it , you have to order seperatelty ... hope this helps, let us know if you have more questions
 
Coombs

Coombs

Well-Known Member
Picked up the edge on 420 sales and it arrived last night. I hit three bowls via the dosing capsules over an hour or two and so far I’m very impressed. The first one was with the bent glass attachment and it was good, nothing amazing, but good. Lots of strong vapour, but I would say it was a bit harsher/hotter when comparing with something like a crafty. The vapour power/potency was just as good though.

Next I did two capsules with the wpa and my bong and that really made me smile. The hits were massive and obviously no cooling complaints this way. I was really medicated after this and pleasantly surprised. Only one day in, but so far I’m glad I saved some coin and went with this over another S&B portable.

For reference my past battery portables have been (in order) the DaVinci ascent, crafty, ghost, hopper IO, vleaf go. The crafty, ghost and hopper are all dead or broken in some way...
 
C No Ego

C No Ego

Well-Known Member
Coombs said:
Picked up the edge on 420 sales and it arrived last night. I hit three bowls via the dosing capsules over an hour or two and so far I’m very impressed. The first one was with the bent glass attachment and it was good, nothing amazing, but good. Lots of strong vapour, but I would say it was a bit harsher/hotter when comparing with something like a crafty. The vapour power/potency was just as good though.

Next I did two capsules with the wpa and my bong and that really made me smile. The hits were massive and obviously no cooling complaints this way. I was really medicated after this and pleasantly surprised. Only one day in, but so far I’m glad I saved some coin and went with this over another S&B portable.

For reference my past battery portables have been (in order) the DaVinci ascent, crafty, ghost, hopper IO, vleaf go. The crafty, ghost and hopper are all dead or broken in some way...
Click to expand...
full manufacturing warranty the first year and then 50% off of a new vape in the future after a year is up .. these vapes are impressive and do what we need for them to do with ease
 
Coombs

Coombs

Well-Known Member
Well the dosing capsules are a nice idea (usually are) but will not see regular use for me. I’ll still use them if at the odd event that I need to be discreet and quick but I always need two to be happy. I was trying to stick with them to make cleaning the bowl a rare occasion but I tried a nice full bowl and there is no going back. One pack is perfect now. Really happy with this device so far.
 
F

falcopus

Well-Known Member
Maybe a stupid question but gonna ask it:

If I turn the unit on and take no hit do I lose some vapor? What I mean is: Does it matter how fast or how much time you take between hits?
 
Jill NYC

Jill NYC

Portable Hoarder
falcopus said:
Maybe a stupid question but gonna ask it:

If I turn the unit on and take no hit do I lose some vapor? What I mean is: Does it matter how fast or how much time you take between hits?
Click to expand...
Not a stupid question.
Yes, you will lose vapor. This is a session vape (vs an on-demand vape)- so once it is on, it will continue to heat the herbs whether you take a hit or not.
It isn’t a particularly aggressive vapor that you lose (meaning, you won’t see wafts of vapor coming out of the stem, like some other session vapes) just a thin stream.
But bottom line, if you were to leave it on without taking any hits, it would still cook the herb. Been there, done that, just turn it back on and step up temp 15 degrees or so and more hits can be had.
 
You must log in or register to reply here.
Top Bottom