Discontinued Haze Dual V3

George1151

George1151

Well-Known Member
jptravels4fun said:
Hey, I just got the DO20 D bubbler. What kind of screen do I use when smoking as water pipe?
A link maybe?

Thank you,
Click to expand...


I think you mean what screen to use in the glass bowl that comes with the bubbler to use without a vape is that correct? I have only used mine with the Haze and the 18mm water adapter.
 
George1151,
  • Like
Reactions: C No Ego
Dynalowrider

Dynalowrider

Well-Known Member
I want to thank Haze publicly for going out of their way to be helpful. I recently passed my Haze v2.5 to my buddy, and couldn't find the manual. I posted on here asking for a copy.
I got an email from Haze with a copy of the v2.5 manual. I think Scott rubbed off on them.
THANK YOU HAZE. Keep up the good work. Looking forward to some great things from you. Doc
 
S

stevedensmore

New Member
What's the secret to getting concentrate stains off the oven walls. I've tried scrubbing with 90% rubbing alcohol covered qtips but that doesn't seem to help much.

I considered soaking a cotton ball with the rubbing alcohol and letting it sit for a while, and then scrub. I don't want to damage anything, though.

Any tips world be greatly appreciated.
 
ilsasta

ilsasta

Well-Known Member
C No Ego said:
all of the screens and cans work well using the wpa and bubbler.. the cans can keep the chamber in the v3 clean but either of the two available screens work too while using a wpa.. you can use oils in the oil cans too and wpa just be conscientious/aware of not dripping oils into the air outlet... some people say to leave the vape flat while using oils in it... I've never tried personally though
Click to expand...
I agree with that, when vaping concentrates the unit should be kept horizontal, tried a while ago with the haze in vertical on a bubbler and had to clean the water adapter right away.
 
ginolicious

ginolicious

Well-Known Member
stevedensmore said:
What's the secret to getting concentrate stains off the oven walls. I've tried scrubbing with 90% rubbing alcohol covered qtips but that doesn't seem to help much.

I considered soaking a cotton ball with the rubbing alcohol and letting it sit for a while, and then scrub. I don't want to damage anything, though.

Any tips world be greatly appreciated.
Click to expand...

Magic eraser. Denture cleaning solution. Or use ISO wipes with the tweezers to scratch/scrape it off. I know you get bad stains. Hard to remove. Try those methods
 
ilsasta

ilsasta

Well-Known Member
George1151 said:
One thing I recentlty found out by accident is if you drop the cans and lids into a denture cleaning solution (I get them at Walmart cheap generic brand) they come out super clean. Even the browning on the outside of the cans that does not come off with an iso soak comes off after an hour in the denture solution. So when I soak my nightguard in the morning I throw in the cans from the day before.

I also rinse out with very hot water my glass after each use (not session).

Keeping everything super clean to me means that every hit is like on a new unit. Best taste worth the extra time and effort I think.
Click to expand...
Do you think i can qtip the ovens with denture solution? There are brown residual in the oven that don't come off even with 99.9% Iso, that's so ugly and disgusting for my taste.
Edit: ooops...ginolicious replied a minute before me. Thanks for the tip I'll try it asap
 
Dynalowrider

Dynalowrider

Well-Known Member
I in no way condone doing this.
Haze upside down, highest temp, damp (distilled water) repeat DAMP qtip, carefully steam away stains. Re Dampen if qtip gets dry. Keep vape oven or bowl pointing down always. Pull the battery when it reaches temp.
This also works on the Boundless CF and CFX. Just saying. Doc
 
George1151

George1151

Well-Known Member
jptravels4fun said:
Does that mean no one will help because this is not the "politically correct" forum for my question? I have have faith in people that someone will help out with an answer...
Click to expand...

I think it is more likely that none of us know since we use ours with a vape (Haze). If you live anywhere near a head shop just take it in and show them where you want to put the screen and they will find something the right size.
 
woolspinner

woolspinner

Well-Known Member
jptravels4fun said:
Does that mean no one will help because this is not the "politically correct" forum for my question? I have have faith in people that someone will help out with an answer...
Click to expand...

OFF (HAZE) TOPIC GENERAL ASSISTANCE RESPONSE:

Let me suggest that if you click the word "Forums" (top left on my phone screen) you will return to all the top level groups list. If, as I understand it, this is a question about a "Glass" item, there is a forum devoted entirely to "Glass" under the umbrella of "General Vaporizer Discussion" which, on my phone screen, is the box directly under the box umbrella titled "Vaporizer Discussion"

Not everyone has the time or patience to give this level of direction to you. Some have repeated the "wrong forum, check here" so many times, they just give up, as it gets tiring. When someone tells you, "wrong forum" even in a rude way, I would suggest going to the home page and taking a look to see what your options might be. For one, if you post a question in the CORRECT forum, you are far more likely to get a good response

OTH...One can announce "wrong forum" in a gentlemanly way, with consideration and the assumption of good intentions on the part of the OP, and only if one has the time and inclination follow up with deeper instruction. I, personally, like to save my harsh words for those who are deliberately obtuse, lazy, or being forum jackasses.

Courtesy may have gone out of style, but why not buck the trend instead of being a lemming?

Just sayin'
 
George1151

George1151

Well-Known Member
Congrats you are going to like it. Did you buy accessories? Like extra cans, case, batteries water tool adapter etc. I use mine mostly mated to a D020D using the 18mm Haze WPA. I find cleaning it after each use makes for the best vaping experience. I qtip the vapor path and lids bowls right after each session while still warm. Take out the battery first. Rarely need to use ISO to clean it by doing it this way. If you don't clean it quite often then the stem will get stuck in the vapor path and even with the lip that they now use on the stem from V2.5 and V3 it can still be hard to take out especially when cold.

Enjoy
 
D

Dangerous87Dave

New Member
I'm really looking forward to trying it out. Heard nothing but good things about the haze v3. There are a few people with concerns about the unit. Overall everyone seems very happy with it.

I've only brought the unit and what it comes with for now, didn't have the money to go to crazy!
Hopefully today will be the day
 
George1151

George1151

Well-Known Member
No concerns at all on this end. 10 year warranty no idea what there is to be concerned about. Only thing I would change is reversing where the bowls and rubber coated "handle" are. To vape one handed with the bowls facing up you have to hold it in your left hand which I just can't get into the habit of. I usually hold it on the bowls side and at temps above 2 it can feel quite hot in your hand.

Kinda weird that is is more lefty than righty friendly although I guess all lefties face that situation with just about everything.
 
D

Dangerous87Dave

New Member
The units turned up, it looks awesome! Battery's on charge.

I'm scared and excited to use it! Showed my dad, he wants one now. What's the best bowl for herb and does oil/wax really work that well?

:rockon::razz::leaf:
 
D

Dangerous87Dave

New Member
I am more than likely gonna ask some noob questions, 1st herb vape and all.

Would you recommend not using the screens just the cans? And the oil can, can that be used as a herb can just take the wick out and change the lid?

I'm gonna have a play today
 
Dangerous87Dave,
Drexciya

Drexciya

Homage to the Deepsea Dwellers
Dangerous87Dave said:
Would you recommend not using the screens just the cans?
Click to expand...
Well that's for you to decide. As said it will keep the bowls cleaner when you only use the cans. But I think it's only optical, the color staining doesn't really affect the taste. I used the screens for the first 0 months because they can hold more herbs but lately I've been down to screens because it keeps everything just a bit more clean.

Dangerous87Dave said:
And the oil can, can that be used as a herb can just take the wick out and change the lid?
Click to expand...

There is only 1 can. That can can be used for oil with the wick and the silicone lid. With herbs you should indeed take the wick out. Now there is no one saying you can't use the silicon lid with herbs but I prefer the stainless steel lid.
 
You must log in or register to reply here.
Top Bottom