Hamm Brushland Scientific Glassware

DaProfessor

Well-Known Member
Watched this vid and loved Hamm's presentation :D Was laughing so hard when I got it. I love how technical his glass pipes are. Incredibly simple at times, but so precise and clean. His art isn't bad either.


Is Hamm just being an ass?
 

DaProfessor

Well-Known Member
That's his oil burner bub. I wish there were better videos of that thing. It seems like its an oil candle that continuously heats a bowl. Works like a tiki torch or those candles where the wick floats around in oil.
 
DaProfessor,

MarcellusWiley

Dab Trotter
Yea the thing i'm mostly confused by is how he drops the dab in, lets it form up vapor/smoke and hits it after waiting.
 
MarcellusWiley,

SD_haze

Well-Known Member
On bitfreakglass.com, Hamm has some oil burner slides for sale, so only a $170 investment to figure out how they work :lol:

Here's an explanation I found on tokecity...but its still pretty puzzling
"These next little units employ roughly the same principle, but one can use a standard Bic lighter with them. They are 14mm concentrate-burner slides, and boast a reclaim-chamber, as well as a magnifier on the front that will show you the condition of your flame, so you know if it is at optimum temperature, and not being snubbed out by having it too close to the underside of the concentrate reservoir, and the lighter fumes are allowed to escape through a chimney that is placed higher than the intake tube for the vaporized concentrate. Once again, they are hard to explain, but work incredibly well once you get the hang of them"

Hamm19_14mm_oil_burner_slide_number_5_of_7_made_165.gif
 

shredhead

Specialist
On bitfreakglass.com, Hamm has some oil burner slides for sale, so only a $170 investment to figure out how they work :lol:

Here's an explanation I found on tokecity...but its still pretty puzzling


Hamm19_14mm_oil_burner_slide_number_5_of_7_made_165.gif

Looks like this is a mini version of his and you just light the bottom with a bic lighter and then when it's the right temp you drop the oil. The bowl must keep the vapor or smoke contained somehow before you inhale. I want one haha
 
shredhead,

Nbajunkie

Someones always watching..
Anyone see Hamms new bubblers ? Its pretty f ing cool.these things stack..I read he invented the recycler .Although I dont want to spend 400-500 on glass. I can see myself spending 200..I saw a sick vapor bubbler on aqualab really liked the slime and in 2 days they sold them both...
alt_3-4-13-627_1.jpg
alt_3-4-13-629_1.jpg
 
Nbajunkie,
  • Like
Reactions: Roger D

r3vrb

Well-Known Member
Anyone see Hamms new bubblers ? Its pretty f ing cool.these things stack..I read he invented the recycler .Although I dont want to spend 400-500 on glass. I can see myself spending 200..I saw a sick vapor bubbler on aqualab really liked the slime and in 2 days they sold them both...
alt_3-4-13-627_1.jpg
alt_3-4-13-629_1.jpg
they have about 6 of them up for 200$ with different colors.
 
r3vrb,

SD_haze

Well-Known Member
Anyone see Hamms new bubblers ? Its pretty f ing cool.these things stack..I read he invented the recycler .Although I dont want to spend 400-500 on glass. I can see myself spending 200..I saw a sick vapor bubbler on aqualab really liked the slime and in 2 days they sold them both...
alt_3-4-13-627_1.jpg
alt_3-4-13-629_1.jpg
Yeah the new Waterworks series are just awesome.
header.jpg


"Years of research have lead Hamm to create the newest diffusion system on the market: the Exo-Diffuser. Jet technology separates and projects the airstream, forcing maximum surface contact for better filtration and cooling. "


He has a website for them with a long description for each model
http://waterworksglass.com/?page_id=4

The Disk/Rocking Chair - 6inch .....$1000
074.jpg

edit: amazing rocking chair bubbler
 

Nbajunkie

Someones always watching..
I agree! i'm eyeing that exo diffy bubbler on aqualab for that 4 twenty sale. I saw a website like that last night,but was under the impression it was a wholesale site our strictly for retailers
 
Nbajunkie,

SD_haze

Well-Known Member
I agree! i'm eyeing that exo diffy bubbler on aqualab for that 4 twenty sale. I saw a website like that last night,but was under the impression it was a wholesale site our strictly for retailers
For the "contact" part of his WaterWorks website, it says store name is optional so doesn't look like it is limited to wholesalers.
 
SD_haze,

farscaper

Well-Known Member
There is an alcohol oil burning lamp down in the can. That is lit and the smoke and fuel vapor travel out of a chimney that has an outlet higher than the concentrate bowl and device intake. The burner heats (and keeps warm) the concentrate dish that sits under the intake. Kinda works like a belly button or pariscope slide... But with heat always on... I wonder if it burns the oil?

Hamm + Concentrates = MAD SCIENCE :science:
(skip to ~0:38 for the money shot)

The mechanics of this thing still confuse me no matter how many times I watch it
 
farscaper,

Nbajunkie

Someones always watching..
I emailed the hamm waterworks website.I asked if the small exo diffy bubblers could be made with a female joint..A woman named ariel replied saying that all pieces are made with male joint,but they do sell females slides for flowers:\ . I asked the price and she replied that a big shipment is headed out to its big retailers,think dablab.com, aqualabtech too.So that was that. Im still interested , Just wish I could go directly through them.They are too big for that tho...and good for them.Im just glad I got a reply in a few days time.
 
Nbajunkie,
  • Like
Reactions: ShipDit

lookmomnohands

Well-Known Member
I LOVE Hamms work! I've been lucky enough to have owned two pieces by the man, a hurricane bubb and one helluva burly maria tube. Love the shaping, love the function. He's one of the few artists whose work I prefer sans color. This thread makes me miss my Hamms a bit.


 
lookmomnohands,

Cheerful Dub

Spaced Station
Picked up one of the smaller Waterworks designs just to own a Hamm, and I don't even like mini-rigs :lol:
 
Cheerful Dub,
I LOVE Hamms work! I've been lucky enough to have owned two pieces by the man
While I'm troubled by the past-tense of this statement I guess It's better to have Hamm'd and lost I suppose...​
Picked up one of the smaller Waterworks designs just to own a Hamm, and I don't even like mini-rigs :lol:
While the purple part was a psychological challenge I had to overcome, I went ahead and pulled the trigger on the last $200 piece ALT had. I was wanting a stumpy lil travel rig, and Hamm is easily my favorite blower. I'm excited!
rcudaDl.png
 
mrboote,
  • Like
Reactions: 063_XOBX

olivianewtonjohn

Well-Known Member
While I'm troubled by the past-tense of this statement I guess It's better to have Hamm'd and lost I suppose...

While the purple part was a psychological challenge I had to overcome, I went ahead and pulled the trigger on the last $200 piece ALT had. I was wanting a stumpy lil travel rig, and Hamm is easily my favorite blower. I'm excited!
rcudaDl.png
Nice. Purple is a baller color. I hope you post a video of it when you get it
 
Top Bottom