Drsoapp
1008
Did it get better?
-
SCAM WARNING! See how this scam works in Classifieds.
FROLIC by Limelight Herb
- Thread starter Dr. G
- Start date
Zero_Combustions
Active Member
Yes, much better!
I have since posted my thoughts on this amazing device. Have a look back through the previous posts; I think everyone who owns one is in agreement that the Frolic is up there with the best of them.
SolidAirrr
Well-Known Member
Looking
. So, that's just a piece of tape over the screen, right? I've also thought about something like that, might just be annoying if using in bright daylight or should it still provide enough brightness to be visible then? Guess you haven't tried...?
@Dejan LimelightHerb What was the reason for using Ultem instead of PEEK for the mouthpieces and WPAs?
According to ChatGPT, it has a much lower heat resistance than PEEK, reaching down below the max 240 C that the vape can go:
So is it expected that the vapor has already cooled down a lot by the time it gets to the Ultem parts?
Thanks
According to ChatGPT, it has a much lower heat resistance than PEEK, reaching down below the max 240 C that the vape can go:
So is it expected that the vapor has already cooled down a lot by the time it gets to the Ultem parts?
Thanks
Dr. G
Vapman Collector Vapman Beta Tester eMuseo Vapman
Thanks for the info...just ordered two more.
Update on these:
- A tiny film of beeswax over the oven oring makes the lid "click" on very nicely now. Removal is great too. The black outer casing is actually a huge factor in this interface, because you can just press the lid sideways against the perfectly shaped crevice, then downwards to "click" in place. Same for removal. It's great for keeping everything secure and centered.
-Rubbing a rough cloth over the PEEK body smoothed things a lot. Just a micro texture from the CNC process, and I really want to disassemble this to get it on my cloth polishing wheel.
To clarify, I like to fidgit with my devices and flip them around my hands and stuff, which is not fun given how aggressive the surface of the frolic is. If you have dexterity issues or just don't have my need to keep my hands busy, you'll love this thing.
This. It's easy to hold and handle and the button seems to be always in easy access. The size is a plus here too. This device would be easy to operate with gloves or mittens, too, I bet.
I know it's like "I can't win" but the switch is plenty clicky as is. It's soft, but definite. I think something like the fury 3 has the perfect pronounced click that is fun, but this button has a tactile change in state and can't be accidentally pressed. Don't lose that!
Looking
It's a non adhesive "Colored Lighting Gel Filter" that is used for photography lighting and such, cut down to size. They are really cheap, and I'm tempted to get a multi color pack so I can switch it up. In bright daylight I have to shade it with my hand but that's fine by me since I set and forget my settings and the button light is my primary signal for things.
(I'm also thinking that I'll include some filter swatches with every purchase of a frolic mouthpiece from me, when I offer them.)
GREED!!!
No, actually it was aesthetics, black gives a better balance... The vapor is way way cooler at the end so this isn't a variable don't worry. Chat GPT is semi right, yes even below 240 but direct contact heat
Drsoapp
1008
Crafty+ / Mighty+ Glass Bowl Reducers
The chamber reducer made of glass ensures a pure taste and is easy to clean. It also keeps the chamber of the Mighty or Crafty clean.
Anyone had The opporturnity to test these yet? Will they be too tall like the caps were?
Hahahaha, that's good to knowGREED!!!
No, actually it was aesthetics, black gives a better balance... The vapor is way way cooler at the end so this isn't a variable don't worry. Chat GPT is semi right, yes even below 240 but direct contact heat
And is it an FDA or EU-certified high grade, like Ultem 1010 or 1000?
1000, we did not ask for certification from the supplier, because even if we did, this doesn't guarantee much, been using it for a decade, didn't have any issues so far. Tested it myself plus a lab tested the whole device so I wouldn't worry, even if this was POM it would still be fit for the purpose. If you are asking if it's glass infused, it is not but this would mostly affect dimensional stability.
Numerous_Nothing
Well-Known Member
I just Has anyone tried the Frolic with TM2 dosing capsules.? More to follow. Eventually.
They fit, but I had to make more of an effort to get the cooler to click back into place. I had slight concerns the capsule would cause either screen to change shape. No such change to either screen.
FWIW/FYI I also weighed the Frolic and it's 262g. The TM2 (with stock cooling unit - not as pictured above) is 225g.
They fit, but I had to make more of an effort to get the cooler to click back into place. I had slight concerns the capsule would cause either screen to change shape. No such change to either screen.
FWIW/FYI I also weighed the Frolic and it's 262g. The TM2 (with stock cooling unit - not as pictured above) is 225g.
Last edited:
vividchicken133
Active Member
I am really liking the change towards allowing A&B capsules fit properly. I did not quite follow what you meant what would need to be changed. Is there a rough ballpark estimate when that change makes it to the units?
I am a very light weight user, my main is a crafty (with capsules) and occasionally a Dynavap B. For me the frolic would make sense once I can do controlled (smaller) dosages with the capsules, plus the ease of cleaning..or at least the feel of ease of cleaning
I am a very light weight user, my main is a crafty (with capsules) and occasionally a Dynavap B. For me the frolic would make sense once I can do controlled (smaller) dosages with the capsules, plus the ease of cleaning..or at least the feel of ease of cleaning
Numerous_Nothing
Well-Known Member
Dr. G
Vapman Collector Vapman Beta Tester eMuseo Vapman
The S and B Capsules...They are not perfect...you can see the seam (a gap). When you take it out the lid clicks shut tight on my unit (no gap). I hope that we get capsules that fit the Frolic perfectly...this vape deserves a RED CARPET...truly excellent.
PS I am not sure how that small gap is inhibiting performance? I am not sure. It is also pushing down on the screen at the bottom.
vividchicken133
Active Member
ah, I was referring to this post https://fuckcombustion.com/threads/frolic-by-limelight-herb.56172/post-1859497I am really liking the change towards allowing A&B capsules fit properly. I did not quite follow what you meant what would need to be changed. Is there a rough ballpark estimate when that change makes it to the units?
I am a very light weight user, my main is a crafty (with capsules) and occasionally a Dynavap B. For me the frolic would make sense once I can do controlled (smaller) dosages with the capsules, plus the ease of cleaning..or at least the feel of ease of cleaning
I also did a little proof of concept, to make the S&Bs smaller to fit https://fuckcombustion.com/threads/frolic-by-limelight-herb.56172/post-1858120 , so there are workarounds. But if something about the top unit needs change (& it seems like a reasonable decision), when that would be. Or now that I am reading that again, if that decision is still open
Sativapo
Well-Known Member
Nope but if they don't fit, the same in the right size would be a nice/cheap/simple to make accessory. Maybe too simpleCrafty+ / Mighty+ Glass Bowl Reducers
The chamber reducer made of glass ensures a pure taste and is easy to clean. It also keeps the chamber of the Mighty or Crafty clean.verdampftnochmal.de
Anyone had The opporturnity to test these yet? Will they be too tall like the caps were?
or basic for limelight idk
TigoleBitties
Big and Bouncy
I know you have several AVLPs Dr. G. What I've been doing is just removing the top before I use the AVLP capsules. Perfect fit. Works in both session and on-demand modes.