Momor
Well-Known Member
Vapor is produced only after the hot air has passed through the herbs so the vapor is 100% of the same material as the stem
-
SCAM WARNING! See how this scam works in Classifieds.
FROLIC by Limelight Herb
- Thread starter Dr. G
- Start date
Eloh
Active Member
what ?
chlorophyll_man
AVB Inspector
They mean that the vapour path only starts once inside the stem, after the hot air hits the herb.
The manufacturer here mistakenly referenced 'vapour path' when they actually meant 'air path', the two are often confused.
Good day all!
I promised to follow up with a video and all the details by the end of the week, but unfortunately I have to delay this for a few days, sorry about that, as much as I try to stay true to deadlines, sometimes delays are unavoidable.
The packaging and manuals etc. are pretty much completed and the new website should be up shortly.
I promised to follow up with a video and all the details by the end of the week, but unfortunately I have to delay this for a few days, sorry about that, as much as I try to stay true to deadlines, sometimes delays are unavoidable.
The packaging and manuals etc. are pretty much completed and the new website should be up shortly.
SolidAirrr
Well-Known Member
Cool packaging 
Wow, that heatup time decreased quite a bit, relating to first posts. I mean technically ~2 seconds is under 20, but yeah
Gotta say that silver dial sticks out a little too much colorwise as the lower part seems to have darkened. But yeah, just my aesthetic judging from that picture.
The word "exacting" in the second line seems wrong to me, even though not able to read the full sentence
Hope everything will run smoothly soon
Wow, that heatup time decreased quite a bit, relating to first posts. I mean technically ~2 seconds is under 20, but yeah
Gotta say that silver dial sticks out a little too much colorwise as the lower part seems to have darkened. But yeah, just my aesthetic judging from that picture.
The word "exacting" in the second line seems wrong to me, even though not able to read the full sentence
Hope everything will run smoothly soon
Nah, it's fine, next (and final) word of the sentence is "standards".The word "exacting" in the second line seems wrong to me, even though not able to read the full sentence
oddjobold
Vape swap shop
Some observations in no particular order.
The heater looks very similar to a TM heater. Not a bad thing, we all know how well that works. Perhaps TM should have tried to patient it.
21700 big plus. Wish the TM used a 21700. I did suggest that to them sometimes ago. Quite a bit more longevity with not much extra size.
The airpath looks very short. Having read the thread I don't understand how the additional stems will work. With a powerful heater you need powerful cooling. Watching to see how this develops.
The price is high. Is it really £340 and the stems extra? So far in what I am seeing, the only plus over a TM is the 21700. I am not sure there will be a big market for same same, but different and slightly more expensive. Especially from an unknown, TM has earned a name for its self now. Maybe I am missing some big feature that makes this different from the competition.
A cheaper TM clone would have sold like hotcakes. Just saying.
The heater looks very similar to a TM heater. Not a bad thing, we all know how well that works. Perhaps TM should have tried to patient it.
21700 big plus. Wish the TM used a 21700. I did suggest that to them sometimes ago. Quite a bit more longevity with not much extra size.
The airpath looks very short. Having read the thread I don't understand how the additional stems will work. With a powerful heater you need powerful cooling. Watching to see how this develops.
The price is high. Is it really £340 and the stems extra? So far in what I am seeing, the only plus over a TM is the 21700. I am not sure there will be a big market for same same, but different and slightly more expensive. Especially from an unknown, TM has earned a name for its self now. Maybe I am missing some big feature that makes this different from the competition.
A cheaper TM clone would have sold like hotcakes. Just saying.
Last edited:
chillAtGVC
Well-Known Member
Look two posts up.
florduh
Well-Known Member
Just a quick log in to apologize for further delaying this, nearly there now... This is why I didn't want to post any specifics just yet.
Also thank you all for following, appreciate it!
I will follow up soon.
Also thank you all for following, appreciate it!
I will follow up soon.
Yeah things are changing along the way, no worries everything will fit in in the end!Cool packaging
Wow, that heatup time decreased quite a bit, relating to first posts. I mean technically ~2 seconds is under 20, but yeah
Gotta say that silver dial sticks out a little too much colorwise as the lower part seems to have darkened. But yeah, just my aesthetic judging from that picture.
The word "exacting" in the second line seems wrong to me, even though not able to read the full sentence
Hope everything will run smoothly soon
Good day all!
First off, an apology for the delay and broken promises. The thing is, most things here rely on me alone. Due to this, I have always had the philosophy "Product first" which means that the product itself will never suffer but things inevitably will face delays.
The Frolic is now being mass produced, the delay was due to me changing a few aspects of the device last minute, even when we started machining, but as I said above, we won't sell anything that's not 100% from our side and our past products are a testimony to this.
Unfortunately I can't show any details of the device or its internals due to ongoing patent applications, but I will do so as soon as I get a go ahead.
All the updates will be posted on Facebook and Instagram starting today, so if anyone is interested, you can follow up there.
Now I have 2 questions for the hivemind:
1. Should I make a new post for the Frolic as a manufacturer and post the material and all the updates there or continue through this post?
2. As a part of a thank you for your engagement and ultimately your help, we want to do a randomizer and gift one device free to a random forum member, is this something that is allowed here and if so, how should we do this, do you have any advice?
First off, an apology for the delay and broken promises. The thing is, most things here rely on me alone. Due to this, I have always had the philosophy "Product first" which means that the product itself will never suffer but things inevitably will face delays.
The Frolic is now being mass produced, the delay was due to me changing a few aspects of the device last minute, even when we started machining, but as I said above, we won't sell anything that's not 100% from our side and our past products are a testimony to this.
Unfortunately I can't show any details of the device or its internals due to ongoing patent applications, but I will do so as soon as I get a go ahead.
All the updates will be posted on Facebook and Instagram starting today, so if anyone is interested, you can follow up there.
Now I have 2 questions for the hivemind:
1. Should I make a new post for the Frolic as a manufacturer and post the material and all the updates there or continue through this post?
2. As a part of a thank you for your engagement and ultimately your help, we want to do a randomizer and gift one device free to a random forum member, is this something that is allowed here and if so, how should we do this, do you have any advice?
kokolokokolokon
Well-Known Member
IMO yes. It is better to have a good thread with the images and features of the device as first post, and not a facebook link
Yes you can!
[Sorry admins, double post. Merge it when it is possible]
To start a giveaway, please read the Contest Rules & Information. Remember to specify a specific deadline for entries.
There's a good number of threads started by the makers. There's 6+ threads on the plug ins alone. But yeah, the most likely thing is that this thread will be moved from here to the mainstream.
Lets go! Hope were close, Wifes from serbia so been especially eyeing this from the start..
(I 'blame' her or use her as an excuse largely for my weed usage, and vapes
started largely to stealth more from her etc, but if this vapes as tough and efficient and beautiful and more.. as her itll be the best vape in the world lol)
nn
(I 'blame' her or use her as an excuse largely for my weed usage, and vapes
started largely to stealth more from her etc, but if this vapes as tough and efficient and beautiful and more.. as her itll be the best vape in the world lol)
nn
Last edited:
I am so sorry to hear about your misfortune, I am in the same boat
.