FlowerMate Vapormax V/V5.0/V5.0S/V5 Pro
- Thread starter Shit Snacks
- Start date
beertinted
Well-Known Member
Where am I going to be able to purchase the glass mouthpiece?
llamaman001
Well-Known Member
Im making my own glass mouthpiece using an extreme Q mouthpiece and was curious if the silicon already on it is ok to stick in the vapormax? Also the black rubber part you got off the Davinci mouthpiece, is that safe to put near the oven as well?
@virtualpurple
@virtualpurple
Last edited:
llamaman001
Well-Known Member
Cant edit my post anymore but if I can double wrap the extreme q mouthpiece at the bottom with a RED o-ring, the same used in a solo, would that be safe in the little metal screw on part of the mouthpiece? I know it can get pretty hot at times so I just want to make sure Im playing it safe and not going to experience any off gassing
Vape Dr.
Well-Known Member
As long as its an orangish red heat resistant O-ring you should be fine.
The SOLO O-ring sits right in the oven.
I've used the SOLO O-rings many times with the Wispr flexible stem on the SOLO without any issue.
Also the flowermate does not get nearly as hot as the SOLO.
You should be fine, and post pics when your done!
llamaman001
Well-Known Member
Actually now that I think about it the red o-ring is out of the vapor path completely because the glass fits flush against the metal, the o-ring is on the outside of it. This is a red o-ring from thermovape which I believe is high temp?
Im just not sure 100% that these are high temp o-rings? are all red ones high temp?
here you go @Vape Dr.
Basically I just double wrapped the end of the stem with the red o-ring and used a dabber to push it around the glass until it was an air tight connection, came out pretty clean looking!
Im just not sure 100% that these are high temp o-rings? are all red ones high temp?
here you go @Vape Dr.
Basically I just double wrapped the end of the stem with the red o-ring and used a dabber to push it around the glass until it was an air tight connection, came out pretty clean looking!
Last edited:
Vape Dr.
Well-Known Member
Very nice job @llamaman001 That looks excellent! Does the stem still fit in the bottom holder?Actually now that I think about it the red o-ring is out of the vapor path completely because the glass fits flush against the metal, the o-ring is on the outside of it. This is a red o-ring from thermovape which I believe is high temp?
Im just not sure 100% that these are high temp o-rings? are all red ones high temp?
here you go @Vape Dr.
Basically I just double wrapped the end of the stem with the red o-ring and used a dabber to push it around the glass until it was an air tight connection, came out pretty clean looking!
Very Nice!
SamWin69
New Member
FlowerMate Vapormax-V $78.99 for a limited time
I personally own the FM, the PAX and both Titans.
Straight up, even at the regular price point (119.99) the FM outperforms the PAX in every way for me personally. Cloud chasers won't fall in love with the FM, but daily users and convience seekers will love the FM for its inconspicuous design and practical function.
Is it just me or the ceramic chamber makes the herb flavor a lot more pure?
^ and yo! that price is really, really good and they are american sellers! I'm tempted to buy another at this price and keep it in my gym bag (my pre-workout ritual haha)
I personally own the FM, the PAX and both Titans.
Straight up, even at the regular price point (119.99) the FM outperforms the PAX in every way for me personally. Cloud chasers won't fall in love with the FM, but daily users and convience seekers will love the FM for its inconspicuous design and practical function.
Is it just me or the ceramic chamber makes the herb flavor a lot more pure?
^ and yo! that price is really, really good and they are american sellers! I'm tempted to buy another at this price and keep it in my gym bag (my pre-workout ritual haha)
virtualpurple
Well-Known Member
According to davinci all of their silicon pieces are medical grade, and I believe that it is supposed to be quite heat resistant.
In either case I am not using the glass davinci stem anymore since I discovered using the flower mate with my f-bomb water tool. Can definitely produce some clouds and cause myself a little cough if I take a nice large hit, but I get no throat irritation at all. I'm loving it.
virtualpurple
Well-Known Member
The davinci ascent screens are pretty comparable in size and fit in perfectly if I recall correctly
Just ordered this from eBay basing it off of everyone's awesome subscriptions.
It was that or the MFLB as my first vape and hopefully it will be better.
Expecting it on Friday.
Does anyone know the temperature it's at?
I'm not in a med state so I don't really have to option to get only sativas and I'm a little worried I'll get an Indica and not be able to get the CBDs from it.
Wizard puff is based in ontario
It was that or the MFLB as my first vape and hopefully it will be better.
Expecting it on Friday.
Does anyone know the temperature it's at?
I'm not in a med state so I don't really have to option to get only sativas and I'm a little worried I'll get an Indica and not be able to get the CBDs from it.
Wizard puff is based in ontario
Last edited:
Snow White
New Member
Did anyone get a cleaning brush and a packing tool with their Flowermate Vapormax V ordered from alibaba.com?.
I emailed Flower to say I didn't get a cleaning brush and a packing tool with mine and she replied back saying when you order from their website you get '2 x Sumsung built-in 2600mah Li-ion battery; 1 x Vaporizer 1 x Mouthpiece; 1 x Wall charger; 1 x Manual; 1 x Gift box'.
I've seen the Flowermate Vapormax V on other websites and it shows you get a little bag with the brush and packing tool![:\](/i/s/hmm.gif "Hmm :\")
I emailed Flower to say I didn't get a cleaning brush and a packing tool with mine and she replied back saying when you order from their website you get '2 x Sumsung built-in 2600mah Li-ion battery; 1 x Vaporizer 1 x Mouthpiece; 1 x Wall charger; 1 x Manual; 1 x Gift box'.
I've seen the Flowermate Vapormax V on other websites and it shows you get a little bag with the brush and packing tool
llamaman001
Well-Known Member
You should have got a brush and packing tool. Might be you actually found a fake since its from alibaba
virtualpurple
Well-Known Member
Many people have had good experiences dealing with Flower (although I had thought she was on DHgate), so I'm not sure that its a fake.
Both of mine came with a wire brush and a pick of sorts...I would hesitate to call it a packing tool, and to be honest I have never found it to be much use. It doesn't fit well in the storage compartment with the mouthpiece. I think one would be better off with a small metal pick, a small paperclip, or even a toothpick.
I understand the principle of the matter, but I wouldn't lose much sleep over the missing cleaner and packing tool. Neither one has gotten any real use from me.
Both of mine came with a wire brush and a pick of sorts...I would hesitate to call it a packing tool, and to be honest I have never found it to be much use. It doesn't fit well in the storage compartment with the mouthpiece. I think one would be better off with a small metal pick, a small paperclip, or even a toothpick.
I understand the principle of the matter, but I wouldn't lose much sleep over the missing cleaner and packing tool. Neither one has gotten any real use from me.
virtualpurple
Well-Known Member
Well, I discovered an amazing addition we should bring into the family...I discovered that the original Davinci oil cans will in fit into the loading area. I will be be buying 4-6 more oil cans to use my FM as a truly impressive piece of vapery.
virtualpurple
Well-Known Member
You very well may have Vape Dr. I have followed your posts in this thread pretty closely. I may have read it and lost track of origin over time, then credited myself with the idea.
If that's the case I apologize. Do you prefer the pinnacle bullets or the old davinci oil cans? I was going to order some pinnacle pro bullets but they seemed pretty pricey for me to pick up unless I was sure they fit.
I left the silicon top off the oil can because I thought it may restrict the draw a bit, but I will try it next time with the top on.
If that's the case I apologize. Do you prefer the pinnacle bullets or the old davinci oil cans? I was going to order some pinnacle pro bullets but they seemed pretty pricey for me to pick up unless I was sure they fit.
I left the silicon top off the oil can because I thought it may restrict the draw a bit, but I will try it next time with the top on.
Vape Dr.
Well-Known Member
@virtualpurple No Worries! Other people might want to try this method as well, so I'm glad you brought it up my friend!
I have many pinnacle bullets and some fit and some barely fit.
Also ***NOTE*** you have to take the collar of the FM mouth piece for it to fit in the pinnical bullets!!!
Depending on the price of the davinci cans, theyoyokid sells 6 pack of bullets with a nice silicone case that will hold a 7th bullet in the center for $39 shipped I believe.
I have tried both @virtualpurple and I prefer the pinnacle bullets.
It works the same as in the pinnacle. Pack the bullet, drop it, in screw mouth piece on (without the collar), vape, dump the bullet. It keeps the unit very clean too.
I've tried the davinci containers with and without the silicone top. They both work well and keep your FM clean, but the pinnacle bullets seem to hit much better.
virtualpurple
Well-Known Member
Thank you for the guidance.
I decided to browse through the thread and found your posts on pinnacle bullets and the use of the F-bomb within the first 4 or so pages. Doh! I truly apologize if any of my posts have directed credit to myself for those ideas.
I'm hoping to get a few more of these on the cheap. My girlfriend and I have been enjoying ours for some time (she prefers hers over the Haze and even the Ascent as long as we use the F-bomb), but I've been meaning to get a few to give out as gifts to some of the physicians I work with and the guy that cuts my hair.
Vape Dr.
Well-Known Member
Excellent! make sure you go through Flower! She's the best! You can reach her at Flower@vnicecig.com.
Here is a link to her, $50.50 each!
http://www.alibaba.com/product-detail/Newest-arrival-best-selling-e-cigarette_1854191025.html
It is awesome with the F-Bomb!
