Justpassedu
Well-Known Member
I know this has been discussed before but i did a search and i see no answers. Is there a USB charger that will work for the fw 3.0 or possibly another charger from another vape anyone has tried and had success with ?
I've been searching for a car charger... based on the Firewood specs and the included charger, this looks like a possible match: http://www.powerstream.com/nimh-car-3-4.htm
I'm no battery expert though, so don't take my word for it! @firewood please let us know if that charger should be safe, or if there's a better option?
You can just use an inverter in your car. But it doesn't charge while on. So the car adapter isn't as useful to sell or buy..
link is not working for me but i am really looking for a usb cable , cable only for the fw3. If you can help would greatly be appreciated.Also there is a battery pack option that can be used to provide direct power to your FW3 or charge it. http://www.frys.com/product/7726858?site=sr:SEARCH:MAIN_RSLT_PG
When I asked Marc about using http://www.ebay.com/itm/like/131318469799?ul_noapp=true&chn=ps&lpid=82 and this is the response I received:
"As for those links, I don't think either would be capable of supplying enough current. The firewood needs about 5A. Normal USB ports don't go that high and that charger only goes up to 2A."
Can it be plugged into lets say a ipad usb wall charger ?Just google "USB Male To 5.5x2.1mm Plug DC Power Supply Socket Extension Cable Cord" and you will get a ton of results. The problem you will have is finding a USB power supply that will put out 5A. They only go up to 2A typically. If you find one, please do post it.
Yeah was kinda looking for something so when I'm out and about and the batteries are getting low I can charge maybe from a battery pack or the car or even a computer. I don't want to have to unscrew , take batteries out and charge and I wouldn't want carry around the charger supplied with me everyplace I go. Thanks for the replyThere are two reasons to plug it into a usb port - charging, and supplying power to drive the device when batteries are dead. Charging might be possible from a usb port because it doesn't require a lot of current. The problem will be finding a usb charger that can charge 4.8V NiMH packs properly. Driving the device from usb will not work because it requires too much current (5A).
This is the option paytonpenn and I have taken. You have to carry around the pack but its small(half the size of the FW3) and only as heavy as the extra four batteries.A good option for that is a 4 cell aa battery holder with 5.1mm plug. You can put standard eneloop batteries in there use it on the go. The intention is not to charge the device but to plug into the extra pack when the main batteries are dead and use the extra pack as the power source.
I've tried to start at temps 1 and 2 but both are to weak for my liking. Now I just use temp 3 exclusively. I've finished some off at temp 4 but really don't need to as temp 3 seems good for me from start to finish.Ive read mostly great reviews as i expect of the firewood. I see alot of users using temps 1&2 and was wondering are there any users mostly trying temps 3&4? I usually like higher temps especially for night time use.
I've tried to start at temps 1 and 2 but both are to weak for my liking. Now I just use temp 3 exclusively. I've finished some off at temp 4 but really don't need to as temp 3 seems good for me from start to finish.
I don't find it to hot or harsh but I'm a x smoker, I lay the heat heavy to Lily also and do love chasing those clouds!
It is true convection. Heating has been talked about and explained by the manufacturer within the last two pages I believe. Read backwards and you will get to know this vape fast.Can anyone offer me up a comparison( if they have one) between the diffrence with firewood and mighty? (Vapor quality,battery) I need an on demand pure convection vape while I wait for my grasshopper. Is this vape on demand convection? Or does the coil heat the chamber even if not drawing? Would love to read more about the drawing/heating element
The only difference between unfinished and finished is that the finished version gets sanded to a finer grit and gets an application of the beeswax oil. The unfinished is still sanded pretty smooth and with a little more sanding (or not) plus adding the beeswax yourself it will basically be the same as if you ordered finished.Thanks, man. So I guess a finish is obligatory to make the FW resistant to all kinds of wear and tear and have it last longer in it's beauty. I might go for a finished one then.
The only difference between unfinished and finished is that the finished version gets sanded to a finer grit and gets an application of the beeswax oil. The unfinished is still sanded pretty smooth and with a little more sanding (or not) plus adding the beeswax yourself it will basically be the same as if you ordered finished.
I noticed on the site that the unfinished version with a charger is $135 which is $5 more than a finished one. Just wanted to let you know in case it was a mistakeThe only difference between unfinished and finished is that the finished version gets sanded to a finer grit and gets an application of the beeswax oil. The unfinished is still sanded pretty smooth and with a little more sanding (or not) plus adding the beeswax yourself it will basically be the same as if you ordered finished.
I noticed on the site that the unfinished version with a charger is $135 which is $5 more than a finished one. Just wanted to let you know in case it was a mistake
Yeah I just noticed that when I added it to the cart for some reason the drop down wasn't coming up for me in the finished section.It's only 130$ finished WITHOUT a charger... so if you compare em, you gotta to take that into account too
Basically, it's 135 $ to 147$ then
Yeah sorry about how it shows 130 then 147 when you click on the product because it adds the charger. I'd prefer it to show the default (with charger, $147) on the main page but can't get that to work. I'll get that straightened out eventually.Yeah I just noticed that when I added it to the cart for some reason the drop down wasn't coming up for me in the finished section.