Firewood Vaporizer

NOLOGO

NOLOGO

Well-Known Member
rvarick said:
That’s where I am :) So I know I get into the programming with the 8 clicks, and then what steps allow me to check the current setting?
Click to expand...
instead of clicking buttons to check your current setting, click buttons to set it where you want it to be. :sherlock:

EDIT: I just realized you probably mean you want to check what temp range you have already set on each level once you're already inside the programming. sorry!
 
rvarick

rvarick

Well-Known Member
If you’re looking for a discreet protective case for your FW6, I found this one off Amazon which fits like a glove. Link: Hermitshell Hard EVA Travel Case Fits Anker PowerCore 10000 PD

full
 
shredder

shredder

Well-Known Member
Does anyone know if there is an online FW6 manual? It would be nice to read up while waiting. Never had a vape controlled by vibration, lol. It took me a long time to figure out a mod as well, i quickly ran out of fingers to count.
 
shredder,
Chingas

Chingas

Well-Known Member
pxl_jockey

pxl_jockey

Just a dude
@rvarick That's super cool, amazingly perfect fit in my estimation. TY for the link as well :tup: Like my homie @Fat Freddy asked, is that an unfinished version? That's what I'm getting and really looking forward to doing the fine finish myself, I love that step. Oh yeah, I also plan on carving "Bad Mother Fucker" on one side and "Of Combustion" on the other. Think it's gonna look pretty badass but also a classy customisation at the same time. You guys know what I mean? :D

@Chingas okay man, I have to know if the possibility exists that you maybe, might have been really high when posting this? :lol:
Chingas said:
It looks like there may be space for a cell or 3. Perhaps a doob tube with a second strain in it? A vapcap lover might get a dynastash and torch in there as well. Fits like a coffin on the FW6 as is.
Click to expand...

Lol, are we looking at the same thing?:shrug: Unless that case also functions like the TARDIS, there's zero chance of getting any of that stuff you suggest in that pouch and zipping the case up. Your last sentence is true though, which is why everything before it can't be. Seems to me that its main feature is hard shell protection rather than storage. Idk, maybe I'm wrong but looking at the link provided and its exterior dimensions, I don't think you're getting much of anything else besides the fw6 in there. :2c:
 
rvarick

rvarick

Well-Known Member
Fat Freddy said:
Very nice! If it were just a tad bigger to also hold a spare cell that would be ideal. Nevertheless, great find!

BTW, @rvarick is that FW6 a unfinished model?

.
Click to expand...
Nope, it’s a finished one (tung). I still need to add some of Ed’s Bomb Ass Butter to it as well to get it really buttery.

pxl_jockey said:
@rvarick That's super cool, amazingly perfect fit in my estimation. TY for the link as well :tup: Like my homie @Fat Freddy asked, is that an unfinished version? That's what I'm getting and really looking forward to doing the fine finish myself, I love that step. Oh yeah, I also plan on carving "Bad Mother Fucker" on one side and "Of Combustion" on the other. Think it's gonna look pretty badass but also a classy customisation at the same time. You guys know what I mean? :D

@Chingas okay man, I have to know if the possibility exists that you maybe, might have been really high when posting this? :lol:


Lol, are we looking at the same thing?:shrug: Unless that case also functions like the TARDIS, there's zero chance of getting any of that stuff you suggest in that pouch and zipping the case up. Your last sentence is true though, which is why everything before it can't be. Seems to me that its main feature is hard shell protection rather than storage. Idk, maybe I'm wrong but looking at the link provided and its exterior dimensions, I don't think you're getting much of anything else besides the fw6 in there. :2c:
Click to expand...
Yep, it fits close enough on all sides to where it doesn’t move around inside. There’s not much room for anything else except maybe a toothpick or pick tool in the sleeve. Searching for other external battery or camera cases may offer ones with extra room. My main intent on features were protection plus discretion. As in, “man, rvarick always has his external battery with him, he must drain his phone a lot” :)
 
Jill NYC

Jill NYC

Portable Hoarder
Hey all. Sorry I haven’t been able to update much. I had a lot going in the last several days and wasn’t able to play with my new FW6 as much as I wanted.

Unfortunately, the time I have had with it has been a little disappointing.
I am pretty sure it is me not dialing in - just saw @flammy technique and will give that a shot tonight. I have only been using it on level 4 because I can’t seem to get anything from the lower levels.

I will say that I LOVE the form factor. Reminds me of an old school dugout / puzzle. I will post pics later - inside and out.
I will try again tonight and will hopefully get better results.

@flammy how we’re you able to get level two above 310F?
 
rvarick

rvarick

Well-Known Member
Jill NYC said:
Hey all. Sorry I haven’t been able to update much. I had a lot going in the last several days and wasn’t able to play with my new FW6 as much as I wanted.

Unfortunately, the time I have had with it has been a little disappointing.
I am pretty sure it is me not dialing in - just saw @flammy technique and will give that a shot tonight. I have only been using it on level 4 because I can’t seem to get anything from the lower levels.

I will say that I LOVE the form factor. Reminds me of an old school dugout / puzzle. I will post pics later - inside and out.
I will try again tonight and will hopefully get better results.

@flammy how we’re you able to get level two above 310F?
Click to expand...
After being the one needing all the help, I may be able to offer some tips that have worked in my case. Feel free to PM me if I can assist!
 
flammy

flammy

Well-Known Member
Jill NYC said:
Hey all. Sorry I haven’t been able to update much. I had a lot going in the last several days and wasn’t able to play with my new FW6 as much as I wanted.

Unfortunately, the time I have had with it has been a little disappointing.
I am pretty sure it is me not dialing in - just saw @flammy technique and will give that a shot tonight. I have only been using it on level 4 because I can’t seem to get anything from the lower levels.

I will say that I LOVE the form factor. Reminds me of an old school dugout / puzzle. I will post pics later - inside and out.
I will try again tonight and will hopefully get better results.

@flammy how we’re you able to get level two above 310F?
Click to expand...

To change the temperature range for each of the preset settings, you will need to follow the instructions provided. Granted they are a little confusing but here is a good synopsis that should help guide you with that:

rvarick said:
Before I proceed, if anyone has successfully adjusted the temp settings on the FW6, I’d love any tips on how to do it which may not be covered by the steps in the manual.

For instance, does it work like this?
Step 1: Click for heat level you want to adjust; get same # of buzzes back.
Step 2: Click 7 times to go into adjustment mode, get 7 buzzes back.
Step 3: Click 1, 2 or 3 times to choose a temp within one of the 3 tables listed, (get same # of buzzes back?)
Step 4: Click # of times to choose the 10 degree range you want, (get same # of buzzes back?)
Step 4: Done
Click to expand...

rvarick said:
After being the one needing all the help, I may be able to offer some tips that have worked in my case. Feel free to PM me if I can assist!
Click to expand...

Nice! Good of you to pass along what you've learned! I am also willing to answer questions. Feel free to drop them here or PM.

rvarick said:
If you’re looking for a discreet protective case for your FW6, I found this one off Amazon which fits like a glove. Link: Hermitshell Hard EVA Travel Case Fits Anker PowerCore 10000 PD

full
Click to expand...

Great find! I ordered one and will have my case tomorrow!
 
Chingas

Chingas

Well-Known Member
@pxl_jockey Guilty as charged. Just thinking out loud through my fingers on that post. I see a pouch and wonder what could fit. Maybe a pick tool, Storz & Bickel brush and a small chamois cloth? That's a little more realistic.

While checking out @rvarick 's link there was also the Anker version of this case. A touch bigger but it claims it is waterproof and it does cover up the teeth of the zipper better to keep pocket lint and little bits of stuff from jamming up the action of the zipper.

According to Marc's email I have 3 weeks to wait anyway so I just want to read other people's experience's while I wait. I'd love to see pics of the unfinished model since that's what I went for. Back to lurking.
 
Mr. Me2

Mr. Me2

Well-Known Member
Chingas said:
@pxl_jockey Guilty as charged. Just thinking out loud through my fingers on that post. I see a pouch and wonder what could fit. Maybe a pick tool, Storz & Bickel brush and a small chamois cloth? That's a little more realistic.

While checking out @rvarick 's link there was also the Anker version of this case. A touch bigger but it claims it is waterproof and it does cover up the teeth of the zipper better to keep pocket lint and little bits of stuff from jamming up the action of the zipper.

According to Marc's email I have 3 weeks to wait anyway so I just want to read other people's experience's while I wait. I'd love to see pics of the unfinished model since that's what I went for. Back to lurking.
Click to expand...
For case suggestions, you may want to look at the RYOT packratz cases. Also, check out Vatra cases.

I don’t know which size will be best, though...
 
rvarick

rvarick

Well-Known Member
Chingas said:
@pxl_jockey Guilty as charged. Just thinking out loud through my fingers on that post. I see a pouch and wonder what could fit. Maybe a pick tool, Storz & Bickel brush and a small chamois cloth? That's a little more realistic.

While checking out @rvarick 's link there was also the Anker version of this case. A touch bigger but it claims it is waterproof and it does cover up the teeth of the zipper better to keep pocket lint and little bits of stuff from jamming up the action of the zipper.

According to Marc's email I have 3 weeks to wait anyway so I just want to read other people's experience's while I wait. I'd love to see pics of the unfinished model since that's what I went for. Back to lurking.
Click to expand...
Funnily enough I also have that Anker case, and even used it until the other one came. It works well but had some loose space to spare, for better or for worse depending on if you’re looking to fit something else in like a tube, brush, etc. The band inside kept the FW6 in place though.

Edit: I tried getting something like a battery or a doob tube to fit but they were too thick to let it close. Pic below:

full
 
Last edited:
chicago_animal

chicago_animal

Well-Known Member
I was trying to decide between the FW6 and the Ghost. Ghost is on sale for $146 on PIU. Isbit still best to stick with the FW6?
 
chicago_animal,
Mr. Me2

Mr. Me2

Well-Known Member
chicago_animal said:
I was trying to decide between the FW6 and the Ghost. Ghost is on sale for $146 on PIU. Isbit still best to stick with the FW6?
Click to expand...
Immediate gratification v. a wait. Plus, that’s an unbelievable price for the mv1.

With that, I have no experience with either vape...
 
Mr. Me2,
You must log in or register to reply here.
Top Bottom