ataxian
PALE BLUE DOT
How can I get one?
Why are they not on his Web site?
Ed's TnT Wooden Vapor Tubes & Vapor Stems
- Thread starter Ed's TnT
- Start date
Why are they not on his Web site?
ataxian
PALE BLUE DOT
How much will that cost?
NickDlow
Log Hog
I'd sugest getting the 3" WonG. It has ample room to pick up and clear and gives Ed some room for design.
Also if your lucky sometimes they fit a UD if you have one too! 4 out of my 7 nano stems/WonGs fit my UD perfectly. Combined with the core o-rings you can perfectly distance the bud for the heater to avoid the herb touching the screen. My new pup is sure giving my nanos a run for their money! I'd say I love them all equally.
I know your looking for a nano accessories but I thought I'd add that because I was never told of this until Ed mentioned it to me. I'm sure you'll enjoy Ed's phenomenal work as much as me and everyone else.
Also if your lucky sometimes they fit a UD if you have one too! 4 out of my 7 nano stems/WonGs fit my UD perfectly. Combined with the core o-rings you can perfectly distance the bud for the heater to avoid the herb touching the screen. My new pup is sure giving my nanos a run for their money! I'd say I love them all equally.
I know your looking for a nano accessories but I thought I'd add that because I was never told of this until Ed mentioned it to me. I'm sure you'll enjoy Ed's phenomenal work as much as me and everyone else.
Hello and good morning everyone! I hope all is well you alls way and wish yall a great start to your day! I am doing better, back on me feet and making it happen. I want to thank you for stopping by and sharing your feelings for me, I am so thankful to you all and blessed to hear them! I got a follow up with my Dr tomorrow and we are going to just have to have a sit down. I have and had great people in my corner doing some research into my problem. I dont think its a serious issue though, I spoke with my family Dr and he said that whenever he has done my blood work there have never been any indications of anything out of the ordinary. My blood sugar is always good, never high blood pressure or anything that would throw up a flag. I feel better about that, just gotta figure out what the fix is is all and make it happen. I have been thinking about getting me a dog for a while now. I may have mentioned my last dog, Gauge. He was an amazing Black Lab male, hellova retriever, would fetch the ball as long as you would throw it, you would tire before he would! He was my boy, no matter who didnt like me or who I may have pissed off it didnt matter, he was always there and would always lick my face. He was my best friend, we had many many good times together. He would fetch my beers for me, from the fridge or the cooler, bottle or can. He made it about 7 or 8 years, I could tell he was getting old, he was tiring from fetching and just didnt have the energy anymore, then one day he went off and never returned. I just feel that a man aint a man without a good dog and I havent been right since I lost mine a few years back! Well last night I put my deposit down on a beautiful Chesapeake Bay Retriever puppy
He is 7 weeks old saturday, hes in NW Arkansas so its gonna be next weekend before I can get him and bring him home. His mom is about 95lbs. and dad is a little bit larger, he is going to be a freaking beast! Damn I cant wait to get him! I feel a man aint a man without a good dog and I havent been right since I lost mine!
@ctxgooner Thanks for stopping by bro, I appreciate you doing so, hope all is well and wish you all the best!
@midnight rider Good morning, been a while, thanks for the post! I wish you the same my man.
@Vitolo Hello my good friend, thank you for reminding me to keep my head right, it gets tough sometimes but you are right, remembering good shit is the best medicine at times!
@momofthegoons Absolutely, you know where we at!
@beware116 Thanks for stopping by, I dont blame ya, glass aint all its made up to be, yeah it fine and good, but it aint wood! Thing is I have never actually added the Nano wong to the website, I have just been so slammed before all the turmoil in my personal life that got me down, and now I am out of the hole I was in I just havent had time to even think about adding them to the site even yet. I have done many many for folks here at FC and would be happy to do you one if you would like. Just holla at me with specifics of the piece you have in mind such as length, 14 or 18mm, and species and we will go from there. The cost will be somewhere in the $30-40 range just to give you and idea. I hope this is helpful and look to hear from you soon!
@Snappo You would know fo sho! Yeah I need to get my ass in gear and get some made and added to the site soon I suppose. Hope all is well for you my friend, I wish you the best!
@ataxian Thanks also to you for stopping by and the call yesterday, I am gonna get you all fixed up, just hang in there with me is all! I appreciate you letting me do what I do for you and look forward to your thoughts of my work!
@TNT_error Thanks for stepping up bro! Hope your latest pieces are still working well for you, how about a pic post? Would like to see what you working with!
@NickDlow Thanks for posting up bro with all the info and kind words! Working for you has been a pleasure, you have some really nice pieces that were alot of fun to make. I been seeing your pic posts around of those pieces here and there, thanks for sharing your feelings and spreading the word! I wish you all the best also!
Damn yall dont know how excited I am to get my dog, hell I been needing a good friend by my side for a while, cant wait to see him at a year old in his glory giving it hell in the duck hole and standing tall in the truck daring anyone to F with it!
He is 7 weeks old saturday, hes in NW Arkansas so its gonna be next weekend before I can get him and bring him home. His mom is about 95lbs. and dad is a little bit larger, he is going to be a freaking beast! Damn I cant wait to get him! I feel a man aint a man without a good dog and I havent been right since I lost mine!
@ctxgooner Thanks for stopping by bro, I appreciate you doing so, hope all is well and wish you all the best!
@midnight rider Good morning, been a while, thanks for the post! I wish you the same my man.
@Vitolo Hello my good friend, thank you for reminding me to keep my head right, it gets tough sometimes but you are right, remembering good shit is the best medicine at times!
@momofthegoons Absolutely, you know where we at!
@beware116 Thanks for stopping by, I dont blame ya, glass aint all its made up to be, yeah it fine and good, but it aint wood! Thing is I have never actually added the Nano wong to the website, I have just been so slammed before all the turmoil in my personal life that got me down, and now I am out of the hole I was in I just havent had time to even think about adding them to the site even yet. I have done many many for folks here at FC and would be happy to do you one if you would like. Just holla at me with specifics of the piece you have in mind such as length, 14 or 18mm, and species and we will go from there. The cost will be somewhere in the $30-40 range just to give you and idea. I hope this is helpful and look to hear from you soon!
@Snappo You would know fo sho! Yeah I need to get my ass in gear and get some made and added to the site soon I suppose. Hope all is well for you my friend, I wish you the best!
@ataxian Thanks also to you for stopping by and the call yesterday, I am gonna get you all fixed up, just hang in there with me is all! I appreciate you letting me do what I do for you and look forward to your thoughts of my work!
@TNT_error Thanks for stepping up bro! Hope your latest pieces are still working well for you, how about a pic post? Would like to see what you working with!
@NickDlow Thanks for posting up bro with all the info and kind words! Working for you has been a pleasure, you have some really nice pieces that were alot of fun to make. I been seeing your pic posts around of those pieces here and there, thanks for sharing your feelings and spreading the word! I wish you all the best also!
Damn yall dont know how excited I am to get my dog, hell I been needing a good friend by my side for a while, cant wait to see him at a year old in his glory giving it hell in the duck hole and standing tall in the truck daring anyone to F with it!
Melting Pot
Sick & Twisted
Damm Ed that is one good looking pup. Definitely looks like he's going to be a beast!!! Congrats
I'm sure he'll make a nice addition to your family and I bet your boys will love him.
I'm sure he'll make a nice addition to your family and I bet your boys will love him.
@Melting Pot Thanks bro, my boys are going to give him a hellova time, I cant wait to see em about 3 or 4 months out to see who works who! They say that a Chesapeake can be a very dominate animal, you have to show him who is boss and stay in charge, they are hella working dogs that just wont quit. I like a big aggressive dog, I want others to be intimidated by his stature and overall look at first, but once you get to know him he'll be just a big ole puppy!
I gotta figure out a name for him..... Whats he look like?
I gotta figure out a name for him..... Whats he look like?
I like to name my dogs with vocal sounds that I can get my lungs behind so they project loud n clear. No more than two syllables. Should be especially beneficial in outdoor situations involving long distances. Congratulations on the new family member - our furry companions are truly our very best friends!
Last edited:
I take a piece of fine sandpaper, roll it up tight, and sand the inside until smooth (up & down, round n round). This will help to resist any oil impregnation into the wood. Cleaning with a squeezed out ISO dipped Q-tip is easy and effective. However, many find that leaving it unsanded to be perfectly fine ...just letting the oils seep in and sealing the inner diameter. Either way, an ISO Q-tip (damp) will freshen it up.
The vapor that I pull from my unbreakable Ed's TnT wong is sublime.The oil I've pulled out of my broken GonG is so nice...
Last edited:
I'm sure the vapor is great. Just seems wasteful to discard all that beautiful reclaim. I've loved pulling the oil out of the GonG and throwing it right back in to vape it. I wouldn't have thought twice about it, but I've got a good system going for total extraction and I've grown accustomed to having a nice little supply of oil to accompany my kief.
What one may characterize as "wasteful", another might characterize as inconsequential or a non-issue.
Enjoy!
So, back to my actual question: How does one go about actually reclaiming that sweet oil from a WonG instead of throwing away valuable medication? In most cases, the oil is actually better for my pain than the dry herb, so I'd like to avoid wasting it. Is scraping the only reasonable way to get at it?
Ed's TnT custom wong & glass oil Reclaimer - I get great tasting, pure, reclaim using this water tool setup - I also attach the reclaimer to one of my J-Hooks for dry hits.
ichibaneye
Vapriot, Traveler & Vaporizer/ing lover!
No worries Sir and it speak volumes that you got back to me, so thank you. I tried to order the Haze MP tonight from your site. The button for buy now is not active but the one for the wong is ...... which I did already order tonight. I left you a voice mail also. Thanks again and I hope to speak with you soon.
Modnote: Edited to put quote in quote tags
Last edited by a moderator:
Hello and good morning everyone, hope all is well you alls way! I have been rather busy the last couple of days. As you all know I had that thing I had to do with the Drs and all last week, I dont know if I mentioned it or not but my wife had to have a minor surgery the same freaking day matter of fact. we have both been playing catch up and all that. Well Monday during the day sometime, someone fucking piece of shit broke into her house, they used some sort of device to pry open the door and get in, all they took was a bottle of pain pills she had left from her surgery and one of my kids Iphones as well as 2 of their Kindles. Not sure why they didnt get anything else, maybe they got spooked and just got the hell out. Well needless to say it scared the shit out of her and my 3 boys that someone jackass would do such a thing. She and the boys stayed at her sister in laws that night, then I got my boys the next two night and mat have them again tonight, no sweat. She went back to her place day before yesterday and had her mom stay with her that night and last night. I immediately went to the gun store the very next day after this happened. Not that I didnt already give her a gun while she was in the house but I thought it be best that she have one on her at all times. Its not just her safety I have to worry about but my 3 boys as well. I told her that the break in was just a taste of what can happen and that she needed to be prepared at all times. She was like you know how I feel about guns but I said you know how I feel about you and those boys and Ill be damned if I dont do all I can to give you the tools you need to protect them at any cost! I explained to her some situations and how she needed to have a gun just in case, its a priority really in my mind! So I went and got her a freaking nice Smith&Wesson 38 special,
its neat and discreet, fits her hand really well, has the laser sight for quick aiming ability when used, oh and it will FUCK someone up for sure! She shot about 40 rounds yesterday at a small target, more so hit the mark than didnt and she says that she really likes it and feels much more secure now which makes me so much more secure know that she will have it! I explained to her that she will have 5 shots, if she has a notion to fire once, then fire 2 more times, do not fire all 5, shoot 3 times, then ask questions if you must, always have 2 more rounds ready for just in case. God forbid she have the need to use it but at least she knows how and feels confident in doing so, I feel for the fool that sees that little red dot on his chest, F'n pieces of shit, you cant nothing anymore without some one trying to take it from you! Oh they gonna get whats coming to them in the future, in time is all!
@Snappo I like your idea my man, I am trying to come up with a good name and have been looking on the internet, would you believe that on a website for hunting dog names they say that Darnell is a good name for a hunting dog, uh say what????? Darnell????? WTF? Guess Ill just have to see him and get a little time with him and it will come to me. I am so excited to have him, just yall wait, am gonna be posting pics of his accomplishments and all! Thanks for helping out with all your suggestions to beware116, I appreciate you stepping to the plate!
@Aezhenn Hello my friend, thanks for stopping by with the kind words! I am all about a big dog, I like em big burly and intimidating, want someone to know he is around and that he aint about to take shit from anyone! My dog gauge, when someone would knock at the door, I would say KILL and he would raise hell, I would make him heel, open the door and once he saw who it was he was just a big ole puppy, but he sure as hell didnt sound like any puppy from the outside of the door. He was about 65lbs, this one I got coming will be an easy 100, I am sure he will have a hellova deep bark that will spark fear in any ones mind!
@beware116 I hope all is well for you bro and hope that all of Snappos suggestions have been helpful, I dont worry about reclaim myself, just dont have the time to do it. Snappos ideas are spot on though and if you need anything else answered just pls ask, I will help best I can!
@lovecrush Hello and thanks for stopping by, I like your detailing on your solo, very nice, am also glad to see you are digging that stem for quite some time, thats what its all about! I see you only have a couple posts, thanks for dropping by, I would like to thank you for joining here at FC and I look forward to seeing you around. Pls let me know if there is ever anything I can do for you. I wish you well and all the best!
@ichibaneye Good morning, yeah I got the VM this morning, I am on in central time so am a couple hours ahead of you. Had the kids last night so had to get them ready for bed for school this morning and by the time I got all that done hell I was tired too so was in bed about 8pm my time. I dont mind it, I can go to sleep early any night, actually like it that way, the early bird gets the worm! Yeah I havent had time to make the Haze straight stems just yet, made several extra wongs for it when I was making the order for Haze and just havent gotten back to making stems for it just yet, pls hang in there with me. You said you ordered a wong last night, I didnt see an order for any of them this morning, are you sure it went through? Anyway I called you back this morning and left you a VM, so just holla back at me when you are able. Have a great day and I wish you all the best!
its neat and discreet, fits her hand really well, has the laser sight for quick aiming ability when used, oh and it will FUCK someone up for sure! She shot about 40 rounds yesterday at a small target, more so hit the mark than didnt and she says that she really likes it and feels much more secure now which makes me so much more secure know that she will have it! I explained to her that she will have 5 shots, if she has a notion to fire once, then fire 2 more times, do not fire all 5, shoot 3 times, then ask questions if you must, always have 2 more rounds ready for just in case. God forbid she have the need to use it but at least she knows how and feels confident in doing so, I feel for the fool that sees that little red dot on his chest, F'n pieces of shit, you cant nothing anymore without some one trying to take it from you! Oh they gonna get whats coming to them in the future, in time is all!
@Snappo I like your idea my man, I am trying to come up with a good name and have been looking on the internet, would you believe that on a website for hunting dog names they say that Darnell is a good name for a hunting dog, uh say what????? Darnell????? WTF? Guess Ill just have to see him and get a little time with him and it will come to me. I am so excited to have him, just yall wait, am gonna be posting pics of his accomplishments and all! Thanks for helping out with all your suggestions to beware116, I appreciate you stepping to the plate!
@Aezhenn Hello my friend, thanks for stopping by with the kind words! I am all about a big dog, I like em big burly and intimidating, want someone to know he is around and that he aint about to take shit from anyone! My dog gauge, when someone would knock at the door, I would say KILL and he would raise hell, I would make him heel, open the door and once he saw who it was he was just a big ole puppy, but he sure as hell didnt sound like any puppy from the outside of the door. He was about 65lbs, this one I got coming will be an easy 100, I am sure he will have a hellova deep bark that will spark fear in any ones mind!
@beware116 I hope all is well for you bro and hope that all of Snappos suggestions have been helpful, I dont worry about reclaim myself, just dont have the time to do it. Snappos ideas are spot on though and if you need anything else answered just pls ask, I will help best I can!
@lovecrush Hello and thanks for stopping by, I like your detailing on your solo, very nice, am also glad to see you are digging that stem for quite some time, thats what its all about! I see you only have a couple posts, thanks for dropping by, I would like to thank you for joining here at FC and I look forward to seeing you around. Pls let me know if there is ever anything I can do for you. I wish you well and all the best!
@ichibaneye Good morning, yeah I got the VM this morning, I am on in central time so am a couple hours ahead of you. Had the kids last night so had to get them ready for bed for school this morning and by the time I got all that done hell I was tired too so was in bed about 8pm my time. I dont mind it, I can go to sleep early any night, actually like it that way, the early bird gets the worm! Yeah I havent had time to make the Haze straight stems just yet, made several extra wongs for it when I was making the order for Haze and just havent gotten back to making stems for it just yet, pls hang in there with me. You said you ordered a wong last night, I didnt see an order for any of them this morning, are you sure it went through? Anyway I called you back this morning and left you a VM, so just holla back at me when you are able. Have a great day and I wish you all the best!
