Ed's TnT Wooden Vapor Tubes & Vapor Stems

[Ed's TnT]

Alright, alright, alright! I hope all is well out there. Been slammed on my end as always working on this and that. Picked up a new store in Canada for my Flowermate stems, seems they really dig em and cant wait to get them in their store! They put in quite a big order so maybe yall will start to see em around soon. Got a few things I wanna show yall so gonna keep it short!

@NickDlow Got a PM into ya bro, need you to holla at me, wanna discuss your thoughts when you are able! ANd wow bro, that pic you posted is the shit! Thanks for doing so, they look amazing with your Nano, well done my friend!

@beach bum WAS so it is huh! LOL thats funny! You know I am gonna fix you up, just hang in the with me honey! Oh and I am not the man, I just try to walk in his footsteps is all, if I can keep up then I am doing something right!

@Vitolo Thanks for stopping my my man! I hope all is well your way, keep doing what you do and all will be good!

@CarolKing Thanks for stopping by with your pic, I am glad you dig that piece! I hope it brongs many good times to you and anyone who uses it. I wish you well and all the best, pls just let me know if I can ever do anything else for you, you know I will take care of you. Oh its getting close to some me time, I bought 2 cases of 16oz budweiser tall boys yesterday, gonna pop some tops this afternoon and polish off the day with a good buzz!

@Mr. Gweilo 420 I appreciate you stopping by after a while, alot has been going on my way and it just seems to be getting busier by the day! Thanks for the kind words bro, pls tell me more about this S & B units, I am always up for a new thing!

@Shit Snacks @Vape Dr. @TNT_error I know I am missing others but am going off the top of my head, I am sorry I missed ya, I hope you all that are interested in what I have been doing will spread the word for me and tell others that might be interested. Alright, time for show and tell. up first is the IMAG + I think, had a guy send me the unit cause he had a busted mouthpiece so this is what I came up with, its my first attempt at it so it will probably change on the second or third until I get it where I want it but did match up really well and stays put like its supposed to. Got to get some more orings though, didnt like the one I had to use. Gotta be better ones out there.

Now we have the Indica, this also is my first attempt at doing a piece for it, I did this one by hand took me some time but it fits well and works sure enough. I drilled the draw hole at 1/8" so it improves the airflow, got some solid hits from it and was surprised at the amount of vapor I got from the unit. I think I have figured out a way of doing them faster and more consistently instead of doing them all by hand. Oh its fun but screw doing it by hand for every piece, that shit takes alot of time. So I hope you all like what I have done and remember its probably gonna change slightly here or there.

That does it for now, as I said pls post these where ever you think they will be appreciated, I would appreciate that.

 

[TNT_error]

Alright, alright, alright! I hope all is well out there. Been slammed on my end as always working on this and that. Picked up a new store in Canada for my Flowermate stems, seems they really dig em and cant wait to get them in their store! They put in quite a big order so maybe yall will start to see em around soon. Got a few things I wanna show yall so gonna keep it short!

@NickDlow Got a PM into ya bro, need you to holla at me, wanna discuss your thoughts when you are able! ANd wow bro, that pic you posted is the shit! Thanks for doing so, they look amazing with your Nano, well done my friend!

@beach bum WAS so it is huh! LOL thats funny! You know I am gonna fix you up, just hang in the with me honey! Oh and I am not the man, I just try to walk in his footsteps is all, if I can keep up then I am doing something right!

@Vitolo Thanks for stopping my my man! I hope all is well your way, keep doing what you do and all will be good!

@CarolKing Thanks for stopping by with your pic, I am glad you dig that piece! I hope it brongs many good times to you and anyone who uses it. I wish you well and all the best, pls just let me know if I can ever do anything else for you, you know I will take care of you. Oh its getting close to some me time, I bought 2 cases of 16oz budweiser tall boys yesterday, gonna pop some tops this afternoon and polish off the day with a good buzz!

@Mr. Gweilo 420 I appreciate you stopping by after a while, alot has been going on my way and it just seems to be getting busier by the day! Thanks for the kind words bro, pls tell me more about this S & B units, I am always up for a new thing!

@Shit Snacks @Vape Dr. @TNT_error I know I am missing others but am going off the top of my head, I am sorry I missed ya, I hope you all that are interested in what I have been doing will spread the word for me and tell others that might be interested. Alright, time for show and tell. up first is the IMAG + I think, had a guy send me the unit cause he had a busted mouthpiece so this is what I came up with, its my first attempt at it so it will probably change on the second or third until I get it where I want it but did match up really well and stays put like its supposed to. Got to get some more orings though, didnt like the one I had to use. Gotta be better ones out there.

Now we have the Indica, this also is my first attempt at doing a piece for it, I did this one by hand took me some time but it fits well and works sure enough. I drilled the draw hole at 1/8" so it improves the airflow, got some solid hits from it and was surprised at the amount of vapor I got from the unit. I think I have figured out a way of doing them faster and more consistently instead of doing them all by hand. Oh its fun but screw doing it by hand for every piece, that shit takes alot of time. So I hope you all like what I have done and remember its probably gonna change slightly here or there.

That does it for now, as I said pls post these where ever you think they will be appreciated, I would appreciate that.

Damn that MP for my Imag+ looks sexy as shit! Once everything is settled I will spread this to all Imag+ owners, and try to get your name out to China

 

[Ed's TnT]

@TNT_error Do what you do bro, spread the word! I appreciate you throwing my name around and pimping me out, makes me feel all dirty on the inside, I like that!

 

[Shit Snacks]

Ed those are all beautiful ofcourse! I will absolutely be needing the Imag Wong and one for the indica as well! Very interesting designs, can't wait to see some 18mm versions as well! Keep it up, always continue to impres!!

 

[bellas]

That Indica mouthpiece in a black wood would be pretty nice I bet. Nice job Ed! I am going to be watching for those to be offered.

 

[Vape Dr.]

Alright, alright, alright! I hope all is well out there. Been slammed on my end as always working on this and that. Picked up a new store in Canada for my Flowermate stems, seems they really dig em and cant wait to get them in their store! They put in quite a big order so maybe yall will start to see em around soon. Got a few things I wanna show yall so gonna keep it short!

@NickDlow Got a PM into ya bro, need you to holla at me, wanna discuss your thoughts when you are able! ANd wow bro, that pic you posted is the shit! Thanks for doing so, they look amazing with your Nano, well done my friend!

@beach bum WAS so it is huh! LOL thats funny! You know I am gonna fix you up, just hang in the with me honey! Oh and I am not the man, I just try to walk in his footsteps is all, if I can keep up then I am doing something right!

@Vitolo Thanks for stopping my my man! I hope all is well your way, keep doing what you do and all will be good!

@CarolKing Thanks for stopping by with your pic, I am glad you dig that piece! I hope it brongs many good times to you and anyone who uses it. I wish you well and all the best, pls just let me know if I can ever do anything else for you, you know I will take care of you. Oh its getting close to some me time, I bought 2 cases of 16oz budweiser tall boys yesterday, gonna pop some tops this afternoon and polish off the day with a good buzz!

@Mr. Gweilo 420 I appreciate you stopping by after a while, alot has been going on my way and it just seems to be getting busier by the day! Thanks for the kind words bro, pls tell me more about this S & B units, I am always up for a new thing!

@Shit Snacks @Vape Dr. @TNT_error I know I am missing others but am going off the top of my head, I am sorry I missed ya, I hope you all that are interested in what I have been doing will spread the word for me and tell others that might be interested. Alright, time for show and tell. up first is the IMAG + I think, had a guy send me the unit cause he had a busted mouthpiece so this is what I came up with, its my first attempt at it so it will probably change on the second or third until I get it where I want it but did match up really well and stays put like its supposed to. Got to get some more orings though, didnt like the one I had to use. Gotta be better ones out there.

Now we have the Indica, this also is my first attempt at doing a piece for it, I did this one by hand took me some time but it fits well and works sure enough. I drilled the draw hole at 1/8" so it improves the airflow, got some solid hits from it and was surprised at the amount of vapor I got from the unit. I think I have figured out a way of doing them faster and more consistently instead of doing them all by hand. Oh its fun but screw doing it by hand for every piece, that shit takes alot of time. So I hope you all like what I have done and remember its probably gonna change slightly here or there.

That does it for now, as I said pls post these where ever you think they will be appreciated, I would appreciate that.

Ed, they are as amazing as I expected them to be. You are quite the skilled wood worker.
Keep up the amazing work my friend!

 

[Caligula]

up first is the IMAG + I think, had a guy send me the unit cause he had a busted mouthpiece so this is what I came up with, its my first attempt at it so it will probably change on the second or third until I get it where I want it but did match up really well and stays put like its supposed to.

@THC SCIENTIFIC

 

[Vape Dr.]

Ed, the more I look at your Indica mouth pieces, the more I love them.
When things get settled down for you put me down for a one!

 

[Ed's TnT]

Hello and good morning everyone, I hope all is well out there! I am super excited to be going to Denver on Tuesday! Really looking forward to getting out there and meeting new people and checking out other products that I may be able to do something for. Its kinda like doing research, I get to see all the newest shit and hold it in my hand to get an idea of whats possible. I am hoping to open new doors and rub elbows with some heavies. This trip should be well worth it and allow me to show people what I am capable of doing for them. I will let you all know ASAP how its going and went!

@Shit Snacks Thanks for stopping by with the kind words bro! I have some work to do to get the wongs made but shouldnt be a problem. My problem is that I am doing so much stuff now I am running out of time, there is just never enough of it in a day! I thankfully have a guy that I can depend on to turn for me. He is a great wood turner and has come along way. He started out making LB stems and got really good at em. He is now turning alot of my solo stems, while I am doing the more tedious pieces and designing new stuff. I have another guy that I am training that has been with me for about a month now. You cant deny this guy has dedication and an amazing work ethic but he is just a slow learner. He has cost me about $100 worth of lumber already learning. Thankfully I have him working the cheaper stuff like walnut which he hates. Walnut is a hardwood but is rather soft when next to maple. You really have to take your time when turning them into LB stems. I can have one turned to spec., have the lathe turned off to mic. it and make sure its the right dimensions, turn the lathe on to finish sand it and the pressure between the head and tail stock will split it at the end. Oh it sucks but you gotta trash that piece and grab another one to start over again. I gotta believe he will get it cause he wants it so bad, he is just slow to learn is all. Pls be hang in there with me, Ill get you right soon enough!

@bellas The Blackwood was my first though for the Indica, just wanted to use some cheaper stuff to get the design right and sizes figured. There will be some very nice stuff for the Indica really soon, just give me a little time pls!

@Vape Dr. Hello and thanks for checking out my newest pieces! I appreciate all you have done to help make these happen! You have been a big part of this and hopefully I can get you something really special to repay you for your help and kindness. I appreciate you and thank you again!

@Caligula Thanks for stopping by with your post, I have already gotten a PM from them above and have responded to it hoping we can work something out. I feel good about it and think I may have picked up another store! I hope all is well your way and thanks again for stopping by, have a wonderful day!

I forgot to add this pic yesterday, I was told that the screen in the Imag piece is absolutely necessary so I installed a screen in the bottom of the tip, pls have a look.

 

[Snappo]

Hello and good morning everyone, I hope all is well out there! I am super excited to be going to Denver on Tuesday! Really looking forward to getting out there and meeting new people and checking out other products that I may be able to do something for. Its kinda like doing research, I get to see all the newest shit and hold it in my hand to get an idea of whats possible. I am hoping to open new doors and rub elbows with some heavies. This trip should be well worth it and allow me to show people what I am capable of doing for them. I will let you all know ASAP how its going and went!

@Shit Snacks Thanks for stopping by with the kind words bro! I have some work to do to get the wongs made but shouldnt be a problem. My problem is that I am doing so much stuff now I am running out of time, there is just never enough of it in a day! I thankfully have a guy that I can depend on to turn for me. He is a great wood turner and has come along way. He started out making LB stems and got really good at em. He is now turning alot of my solo stems, while I am doing the more tedious pieces and designing new stuff. I have another guy that I am training that has been with me for about a month now. You cant deny this guy has dedication and an amazing work ethic but he is just a slow learner. He has cost me about $100 worth of lumber already learning. Thankfully I have him working the cheaper stuff like walnut which he hates. Walnut is a hardwood but is rather soft when next to maple. You really have to take your time when turning them into LB stems. I can have one turned to spec., have the lathe turned off to mic. it and make sure its the right dimensions, turn the lathe on to finish sand it and the pressure between the head and tail stock will split it at the end. Oh it sucks but you gotta trash that piece and grab another one to start over again. I gotta believe he will get it cause he wants it so bad, he is just slow to learn is all. Pls be hang in there with me, Ill get you right soon enough!

@bellas The Blackwood was my first though for the Indica, just wanted to use some cheaper stuff to get the design right and sizes figured. There will be some very nice stuff for the Indica really soon, just give me a little time pls!

@Vape Dr. Hello and thanks for checking out my newest pieces! I appreciate all you have done to help make these happen! You have been a big part of this and hopefully I can get you something really special to repay you for your help and kindness. I appreciate you and thank you again!

@Caligula Thanks for stopping by with your post, I have already gotten a PM from them above and have responded to it hoping we can work something out. I feel good about it and think I may have picked up another store! I hope all is well your way and thanks again for stopping by, have a wonderful day!

I forgot to add this pic yesterday, I was told that the screen in the Imag piece is absolutely necessary so I installed a screen in the bottom of the tip, pls have a look.

As always, Ed, beautiful AND innovative masterpieces! Your products are what bring new vapes up to and over this new industry's leading edge! I can foresee the day not too far off when Ed's Tnt will be automatically considered in partnership and design with current and new vapes coming to market, as a matter of course and just good business sense! Your logo will be proudly featured on their marketing & packaging as a great promotional enhancement! It doesn't take a crystal ball to see that big successes are awaiting you at Ed's TnT headquarters!

 

[poonman]

@TNT_error Do what you do bro, spread the word! I appreciate you throwing my name around and pimping me out, makes me feel all dirty on the inside, I like that!

Good day Ed ,
I've heard a LOT of good things about you here on FC .
Just visited your site , but noticed No 18mm wongs for the Solo .
Can you make 18 mm wongs ?

tia

 

[Snappo]

Good day Ed ,
I've heard a LOT of good things about you here on FC .
Just visited your site , but noticed No 18mm wongs for the Solo .
Can you make 18 mm wongs ?

tia

Custom 18mm Solo Wong - 3rd & 4th from the right!

 

[poonman]

Hey thanx Snappo ,
I can't wait for PV anymore !
Dunno why I couldn't find it .
I'll try again ...


edit ;
Hi Ed ,
How fast to get one up here to Toronto ?
n
Do you accept paypal ?

tia

 

[Ed's TnT]

@Snappo Wow, your words are so encouraging! I appreciate them and you! I look forward to the future you speak of and welcome it with open arms. Thanks for sharing your vision with me!

@poonman Hello and thank you for your interest in my work! I have been planning on adding the 18mm wongs to the website its just I havent had time to make a bunch of them and post them yet. I have been so slammed with other stuff that finding time is killing me. I can do you an 18mm Solo wong if you like but at this moment it would have to be a custom piece. If you wanna talk about it pls PM me and lets go from there. Thanks again and I hope to hear from you soon!

 

[°k]

That Indica mouth piece looks really nice and a lot more appealing than the default one I think. I can see one in a nice redish wood going very well with the metal one!

I just need Vapefiend to update their stock and I'll make sure to get one from you as soon as I order from them.

Also the black one would go super well with a light tone wood like this I think:

Now here's a question I've been meaning to ask for a while, what about resin stabilized woods? are they ok to make stems of or is that resin toxic?


Edit: oh and break a leg in Denver

 

[Ed's TnT]

That Indica mouth piece looks really nice and a lot more appealing than the default one I think. I can see one in a nice redish wood going very well with the metal one!

I just need Vapefiend to update their stock and I'll make sure to get one from you as soon as I order from them.

Also the black one would go super well with a light tone wood like this I think:

Now here's a question I've been meaning to ask for a while, what about resin stabilized woods? are they ok to make stems of or is that resin toxic?


Edit: oh and break a leg in Denver

I think you are right bro, I so dig contrasting wood tones on any unit. I do alot of my dugout work utilizing the sapwood and heartwood for the contrast. The red wood look bad ass with the black unit even some white curly maple would be the shit! Hang in there with me bro, you are gonna see alot of new things coming soon enough.

As far as the resin stabilization goes, its tough to say, I have never used any cause of the fear of offgasing but @Snappo knows a guy that has perfected the process and swears by his technique that it wont do that for vaporization purposes, says it doesnt get hot enough to affect the wood in any way. But for the most part unless you know snappo's guy I wouldnt put my health in anyones hands, but thats just me!

 

[TNT_error]

Hello and good morning everyone, I hope all is well out there! I am super excited to be going to Denver on Tuesday! Really looking forward to getting out there and meeting new people and checking out other products that I may be able to do something for. Its kinda like doing research, I get to see all the newest shit and hold it in my hand to get an idea of whats possible. I am hoping to open new doors and rub elbows with some heavies. This trip should be well worth it and allow me to show people what I am capable of doing for them. I will let you all know ASAP how its going and went!

@Shit Snacks Thanks for stopping by with the kind words bro! I have some work to do to get the wongs made but shouldnt be a problem. My problem is that I am doing so much stuff now I am running out of time, there is just never enough of it in a day! I thankfully have a guy that I can depend on to turn for me. He is a great wood turner and has come along way. He started out making LB stems and got really good at em. He is now turning alot of my solo stems, while I am doing the more tedious pieces and designing new stuff. I have another guy that I am training that has been with me for about a month now. You cant deny this guy has dedication and an amazing work ethic but he is just a slow learner. He has cost me about $100 worth of lumber already learning. Thankfully I have him working the cheaper stuff like walnut which he hates. Walnut is a hardwood but is rather soft when next to maple. You really have to take your time when turning them into LB stems. I can have one turned to spec., have the lathe turned off to mic. it and make sure its the right dimensions, turn the lathe on to finish sand it and the pressure between the head and tail stock will split it at the end. Oh it sucks but you gotta trash that piece and grab another one to start over again. I gotta believe he will get it cause he wants it so bad, he is just slow to learn is all. Pls be hang in there with me, Ill get you right soon enough!

@bellas The Blackwood was my first though for the Indica, just wanted to use some cheaper stuff to get the design right and sizes figured. There will be some very nice stuff for the Indica really soon, just give me a little time pls!

@Vape Dr. Hello and thanks for checking out my newest pieces! I appreciate all you have done to help make these happen! You have been a big part of this and hopefully I can get you something really special to repay you for your help and kindness. I appreciate you and thank you again!

@Caligula Thanks for stopping by with your post, I have already gotten a PM from them above and have responded to it hoping we can work something out. I feel good about it and think I may have picked up another store! I hope all is well your way and thanks again for stopping by, have a wonderful day!

I forgot to add this pic yesterday, I was told that the screen in the Imag piece is absolutely necessary so I installed a screen in the bottom of the tip, pls have a look.

That imag MP is so nice. What kind of screen did you use and is it removable? Wow though, that MP looks like it fits very nice and tight. Awesome @Ed's TnT

 

[Ed's TnT]

@TNT_error I used a 3/8" screen and it fits nice and snug in there, it is removable also. I am glad you dig it bro, thanks for noticing!

 

[TNT_error]

Ok @Ed's TnT you just made the perfect MP that the imag+ definitely needed. Kudos good sir

 

[Ed's TnT]

Good afternoon everyone, I hope all is well out there. Had an awesome trip to Denver this last few days! The flights were shorter than the lay overs but it was all good. Boarded the plane at about 10am central time and was in CO at around 2pm their time. Rushed off the plane to get the car rental, got a big phat white Yukon with a full tank of gas and extra insurance just in case shit happened. Had the nearest dispensary google mapped three miles from the hotel so before I even checked in had a sack, some edibles and some shatter. Got some Geisha, first time I had ever heard of it but was 22% THC its sativa, I told em I wanted an uplifting high, something that would motivate me and wow did it! I got hella high! Its funny, the lady at the hotel desk specifically said no smoking on property of any sort, but when you get off the elevator thats all you could smell. The place reeked of herb, it was everywhere. So off to the tradeshow for a couple of hours. Got there made a quick run through of the place met my guy from Glow Industries got the passes to the after party then right across the isle was Mike from Indica vape. He has two led monitors about 30", one on either side of his booth showing the image I posted of the Indica with the wooden mouth piece I made. How bout that! The guys from everyonedoesit were there rapping with Mike and I brought the piece out and we all started to vape with it. Mike was cool but he wants to see a wong for the Indica. I was not able to show him a wong for it but told him, its just a matter of time before I have a wong made for it. I already know how to do it in my head, I just have to spend about $300 to buy a new machine and tooling to do it, mind you I have already spent a couple hundred or so trying other methods that didnt work as well as I would have liked. No sweat though, you gotta spend money to make money! I'll get it right in time thats all. The weather up there was unreal, Fall was in the air and the leaves were falling off the trees, no humidity at all, it felt amazing the whole time I was there. The next day I hit the ground running, got some breakfast walked to another dispensary spent another $150 on goodies and went back to the hotel for a few sessions of shatter before hitting the tradeshow. Got with @VoltageKeeper and he spent the day with me at the show, first time I had ever met him, we have spoke about this and that, throwed an idea at each other from time to time but meeting him in person was cool, we had a great time. The show this year was more geared to dabbing and vape pens, very few vaporizers there this one. Met @stonemonkey55 from VXL and did some dabs with the fine folks of Magic Flight in there new concentrates box. Was really surprised about who I didnt see mostly. Been to shows in the past that were nothing but vapes but not this year. Showed off my work to a couple people that were interested but didnt really break any new ground, I was a little disappointed. Ah well thats just the direction the market is going at the moment, its a trend and am sure it will change again soon enough. I have some orders to fill this afternoon for shipping Monday. Got a couple more big wholesale orders that I am gonna have my guy get right on today turning wood. I have a few custom orders I gotta get out but nothing crazy. Am gonna try and have the Haze and Hammer stems available on my site this week if all goes well.

All you had to do was give them a business card and they gave you a free doobie

This stuff was amazing!

@TNT_error Just give me a little more time bro, think I may have something else up my sleeve for the MP, just you wait my friend!

 

[TNT_error]

No worries @Ed's TnT . Im patient enough. That Denver meet looks so awesome. It's basically still summer in SoCal haha. Are you going to the Cannibus Cup in Feb?

 

[Ed's TnT]

@TNT_error I would love to go to the Cup but am trying to get my shit together for a trip to Barcelona next year for Spannibus, I have been told that is where to worlds heavies go.

 

[VoltageKeeper]

It was a blast spending the day with you guys at the show, got to see some really cool stuff and meet some cool people. So much cool glass and other stuff all packed into one place, I was like a kid in a candy store!

 

[scottg402]

I took these tonight to share with @Shit Snacks so I figured I would share them with everyone else.

I know that @virtualpurple already put his pics up but it's been a little while and Ed's work is so beautiful I didn't think anyone would mind.

I really hope @Haze Vaporizers and Ed are finding a way to work something out because just look how nice you go together.......

Thank you so much Ed! I just ordered a Wong for my Solo too. I'm guessing you are shipping it out tomorrow. I can't wait!

 

[teddys head]

confused.com here lol , can the solo stems be sent my direction, it says worldwide shipping, then at checkout no shipping to Ireland
sorry if this has been discussed before