BOBCAT
Its Just Temporary
I was thinking maybe one big stand to hold everything,but that would take that beautiful piece I just got out of circulation,and I don't wanna do that.
Ed's TnT Wooden Vapor Tubes & Vapor Stems
- Thread starter Ed's TnT
- Start date
I was thinking maybe one big stand to hold everything,but that would take that beautiful piece I just got out of circulation,and I don't wanna do that.
There is a limit to what I can and cant do. I turned your piece round in my lathe, it started out about 6" square. I can do 10" wide X 18" length, the hard part is finding a board wide enough. But you sure dont wanna just quit using the neat stand you just got. Hmm if you have any ideas pls let me know.
Hello and good morning everyone, I hope all is well out there! As you all know I have been hard at it working up pieces for the Haze and Flowermate. I took some pics and need some help you all, what I need is some contact info for the folks at Flowermate, I wanna fire off some emails and show them what I have come up with and see where it goes. I gotta believe that good things will come! Pls let me know what you all think of my latest work, its been fun getting out of the box!
Below is a 14mm Blackwood Wong for the Haze
Blackwood Stem
14mm Cocobolo Wong for the Flowermate
And EQ accessories
Edited to add these images
Below is a 14mm Blackwood Wong for the Haze
Blackwood Stem
14mm Cocobolo Wong for the Flowermate
And EQ accessories
Edited to add these images
Last edited:
Once again you have outdone yourself X10!!! Amazing workmanship!Hello and good morning everyone, I hope all is well out there! As you all know I have been hard at it working up pieces for the Haze and Flowermate. I took some pics and need some help you all, what I need is some contact info for the folks at Flowermate, I wanna fire off some emails and show them what I have come up with and see where it goes. I gotta believe that good things will come! Pls let me know what you all think of my latest work, its been fun getting out of the box!
Below is a 14mm Blackwood Wong for the Haze
Blackwood Stem
14mm Cocobolo Wong for the Flowermate
And EQ accessories
virtualpurple
Well-Known Member
Ed man, you are a true Maestro. I'll get you in touch with the rep at SMISS I've been buying my vapes with. I think she'd be a good resource, and she was asking me about your stems anyways.
@virtualpurple Thanks for the kind words bro, spread the word, spread the word!
@scottg402 You know I really like the look of the Indica, its small and stealthy, very well made and hits nice and smooth, I dig it. Oh my guy that works for me is taking it by the machinists today to get us a special tool made just for my idea. I think we got it in the bag bro, wont be long at all and I will have you all something to look at! So keep an eye out for me, the magic is happening!
Hello and good morning everyone, I hope all is well! Got out in the shop about midnight last night and gave it hell for about 7 hours. Got all but 1 piece turned for custom work, had a pile to do too. Gotta put bushings on, install pins, then grind and polish before I can brand and butter, am almost done! Gotta get started on dugouts next week, I have almost sold out of every dugout I had in stock, I need to make a couple hundred at least to get ahead on them. So so much to do yall! I gotta get out in the shop really quick and snap some pics of the new Haze pieces so I can get them up on my website. Oh and by the way the good folks at Haze got in touch with me yesterday evening, seems they dig my work and wanna discuss the future with me! The Haze straight stem is alot like the LB stems I turn, its damn close in size on one end but a little larger on the opposite end. The Haze wongs are fun to do too. Damn I am doing stems for all kinds of vapes! Its a trip, I started out here when a good guy saw my work, bought a dugout, and then started a thread for dugouts. He contacted me and said hey you need to check out this forum FC. I did and one thing lead to another and I started out making MZ stems. I have made stems for almost a dozen vapes I think and have the Indica to figure out and another different one on the way to me next week. I have come along way and have really grown so much thanks to you all here at FC. You all inspire me and give me the drive to excel and learn new techniques and think most of all. Thats the the best part, thinking, making my mind work, getting the gears turning in my head. Its exciting to try new things and come up with new ideas that work so that I can reach even more people with my work. Thank you all for what you do!
@scottg402 I got you bro! In fact not only did we get with the machinist to get a tool made but I also ordered the tooling I need so if one idea doesnt work I have another way to go about it. There is always more than one way to skin a cat! I am doing my damnest to get you all something to look at before this time next week. Hang in there with me.
@beach bum Good morning and thanks for stopping by and having a look! I am glad you like the new pieces and pics. Keep an eye out for me, I have so much cooking and irons in the fire, its crazy round these parts!
I wish you all the best and a great weekend! Bout to snap a couple pics, get the kids fed and then we are going fishing! Its a small pond way out in the country, over stocked with fish, most of them are small but my boys dont care, a fish is a fish, they always get a smile on their face when they catch one, and so do I watching them. Its gonna be a great day yall, enjoy it!
@scottg402 I got you bro! In fact not only did we get with the machinist to get a tool made but I also ordered the tooling I need so if one idea doesnt work I have another way to go about it. There is always more than one way to skin a cat! I am doing my damnest to get you all something to look at before this time next week. Hang in there with me.
@beach bum Good morning and thanks for stopping by and having a look! I am glad you like the new pieces and pics. Keep an eye out for me, I have so much cooking and irons in the fire, its crazy round these parts!
I wish you all the best and a great weekend! Bout to snap a couple pics, get the kids fed and then we are going fishing! Its a small pond way out in the country, over stocked with fish, most of them are small but my boys dont care, a fish is a fish, they always get a smile on their face when they catch one, and so do I watching them. Its gonna be a great day yall, enjoy it!
scottg402
Well-Known Member
Ed that is awesome! I had put in a good word with my contacts at @Haze Vaporizers for you. I told them I really appreciated your work and you were a great guy to deal with so I am thrilled they contacted you to discuss options down the line!
I can't wait for my stuff! I ordered my WT yesterday so I am ready to go once they arrive. That said don't stress on my account. You can't rush a good thing and I can be patient. I would rather see you work in things to expand your business and bring you further success. You deserve it Ed!
Enjoy the family time! My family happens to be out of town this weekend so it's just me, my dogs and all my vapes. I will be "testing" them all this weekend!
I can't wait for my stuff! I ordered my WT yesterday so I am ready to go once they arrive. That said don't stress on my account. You can't rush a good thing and I can be patient. I would rather see you work in things to expand your business and bring you further success. You deserve it Ed!
Enjoy the family time! My family happens to be out of town this weekend so it's just me, my dogs and all my vapes. I will be "testing" them all this weekend!
Last edited:
Ed - I think that the Blackwood stem you made for the FlowerMate would also look spectacular on the Haze. It's a great design!Hello and good morning everyone, I hope all is well out there! As you all know I have been hard at it working up pieces for the Haze and Flowermate. I took some pics and need some help you all, what I need is some contact info for the folks at Flowermate, I wanna fire off some emails and show them what I have come up with and see where it goes. I gotta believe that good things will come! Pls let me know what you all think of my latest work, its been fun getting out of the box!
Below is a 14mm Blackwood Wong for the Haze
Blackwood Stem
14mm Cocobolo Wong for the Flowermate
And EQ accessories
Edited to add these images
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Hello and good afternoon everyone, we had a good day fishing yesterday! Carter my 10 year old caught 3 - 2 big brim and 1 bass, my youngest Kyle caught 1 small bass, and my oldest Connor got skunked. The fish werent that big but their smiles sure were. Its still pretty hot down here, the wind was blowing yesterday but I was still sweating like hell. We came home cleaned the fish and hung out for a while. I even slipped in a little time to get the grass cut. Today has been a good day as well, been finishing up a bunch of custom pieces getting them ready for shipment Tuesday. All is well down south yall!
@scottg402 Thanks for putting the good word in for me bro! Thats much appreciated! I thank you also for the kind words about my biz, its alot of work trying to keep up with all that I do and tend to get behind from time to time. Its a good thing much business is better than no business! Oh you gotta love testing bro, thats the fun part of my biz, making these cool things and then you have to test em, wow I get ripped during testing! Got your pieces all done and they ship first thing Tuesday my man, cant wait to hear what you think and how they perform for you. Hope all is well!
@Snappo I think you got something there! Will give it some thought and see if I cant put something together. Thank you for the suggestion!
@beach bum Got your PM, all is good, thanks for throwing some more biz my way, I thank you for all you do for me!
@Quetzalcoatl LOL bro, you better watch me, aint no telling what you will see round these parts, thanks for stopping by!
@froidy I think you will be very happy with the bloodwood, its an amazing piece rich in color and is super dense, its a winner in my book! Enjoy it and pls let me know what you think of my work.
@scottg402 Thanks for putting the good word in for me bro! Thats much appreciated! I thank you also for the kind words about my biz, its alot of work trying to keep up with all that I do and tend to get behind from time to time. Its a good thing much business is better than no business! Oh you gotta love testing bro, thats the fun part of my biz, making these cool things and then you have to test em, wow I get ripped during testing! Got your pieces all done and they ship first thing Tuesday my man, cant wait to hear what you think and how they perform for you. Hope all is well!
@Snappo I think you got something there! Will give it some thought and see if I cant put something together. Thank you for the suggestion!
@beach bum Got your PM, all is good, thanks for throwing some more biz my way, I thank you for all you do for me!
@Quetzalcoatl LOL bro, you better watch me, aint no telling what you will see round these parts, thanks for stopping by!
@froidy I think you will be very happy with the bloodwood, its an amazing piece rich in color and is super dense, its a winner in my book! Enjoy it and pls let me know what you think of my work.
NickDlow
Log Hog
I usually have the same luck as ur oldest fishing. I take my 5yo nephew, he bags them left nd right! Me, I usually get robbed if I use live bait, or get caught up with lures haha. But I tend to get lucky here n there. As long as he's having a good time so am I. I'm glad you got a chance to relax with the family and knock out that work. Nice job! I can't wait to see those stems I'll be sure to show everyone ur beautiful work! Thanks again Ed.
@Snappo i should also thank you for the gorgous stem blanks to make this possible!
@Snappo i should also thank you for the gorgous stem blanks to make this possible!
Last edited:
beach bum
Member
Ya know...some FCers have VAS. Some have GAS. Shit, I think I have WAS. 
Had to do it. My better half wanted a Nano and didn't want to share mine. Ok..I didn't want to share it either because it's a freakin' beast. So got another Nano. Now guess what else was needed? WonG. And a pretty one.
So, talked (emailed/messaged) with @Ed's TnT and letting the artist do his thing.
I sent him a pic of the new Nano (along with other wood he'd worked in the past as a reference) and asked him to run with it. Now to be patient and see what cool thing comes this time! 
Ed, you da man!
Thanks for all your help and kindness. 
Had to do it. My better half wanted a Nano and didn't want to share mine. Ok..I didn't want to share it either because it's a freakin' beast. So got another Nano. Now guess what else was needed? WonG. And a pretty one.
So, talked (emailed/messaged) with @Ed's TnT and letting the artist do his thing.
I sent him a pic of the new Nano (along with other wood he'd worked in the past as a reference) and asked him to run with it. Now to be patient and see what cool thing comes this time! Ed, you da man!
Thanks for all your help and kindness. 
beach bum
Member
NickDlow
Log Hog
WOW!!!!! Great job @Ed's TnT these stems compliment my nano perfectly THANK YOU!!!!!!
My favorite is the one in the nano! Red with the light tip absolutly beautiful. Ed you are the man. I haven't tried the haze stem n WonG yet. I need an adapter to step down my 18mm female joints to a 14mm female joints. The stem will be used shortly I'll post pics n the Haze thread. Keep up the great work Ed! Sorry for the scare earlier also haha
My favorite is the one in the nano! Red with the light tip absolutly beautiful. Ed you are the man. I haven't tried the haze stem n WonG yet. I need an adapter to step down my 18mm female joints to a 14mm female joints. The stem will be used shortly I'll post pics n the Haze thread. Keep up the great work Ed! Sorry for the scare earlier also haha
Last edited:
CarolKing
Singer of songs and a vapor connoisseur
I received my 18 mm Blackwood WonG for my Solo. It fits really well and the taste is absolutely wonderful. I appreciate all your work. Later this weekend I will try it out with my bubbler. I also have my Pipes stand with my Solo.
Im really looking forward to what you come up with for the Indica. I will be buying an 18mm WonG, and I haven't even seen it yet. I have faith that you will come up with something great. I hope you are having fun getting to know the Indica. A great little vape with really good vapor flavor.
I always use the WonG while using my Ascent and prefer it over the regular mouthpieces that came with the unit.
Ed have a good weekend with your family. Take some time to kick back, enjoy some "me time".
Good Times
Im really looking forward to what you come up with for the Indica. I will be buying an 18mm WonG, and I haven't even seen it yet. I have faith that you will come up with something great. I hope you are having fun getting to know the Indica. A great little vape with really good vapor flavor.
I always use the WonG while using my Ascent and prefer it over the regular mouthpieces that came with the unit.
Ed have a good weekend with your family. Take some time to kick back, enjoy some "me time".
Good Times
Last edited:
Mr. Gweilo 420
Dude
wow. just popped by this thread for the first time in a little while. Its amazing to see Ed's work progressing so well. I was thinking you may have a potential market with the new S & B portables as well 