Ed's TnT Wooden Vapor Tubes & Vapor Stems
- Thread starter Ed's TnT
- Start date
Hey hey, @phattpiggie My man so glad those bushings worked out for you bro, a man is only as good as his tools, the right tools make the job so much easier, got a butt load of those if ya ever need any more in the future, just holla!
Wow @SSVUN~YAH very cool seeing that rig, I like George's caps those look great! Hope all is well my man, ya know you will be able to use that with the WS very soon sir!
almost there
Well-Known Member
That is my fantasy pieceHad to stop by and say thanks for your wonderful work. Got a new OmniVong, with a familiar branding, its a beauty. Hope things are going well, happy new year bro!
, you are very lucky!! I just hit Matt up at Dynavap looking for this exact combo of Skinny burl vong omni, unfortunately the only ones that exist right now are in the hands of lucky owners. Ed, if have any 14mm burl vong pieces in need of a good home please give me a shout anytime, my door is always open
.
Beezleb
Well-Known Member
This thread has brightened my whole day!
Few will recall me but I send people here for two reasons. One, when they want vaporizer information and when they want some if not the finest woodwork for this industry.
Love to see well the forum has done. Was never a doubt in my mind. Ok, back in the nether of smoking essence I go!
Beezleb!
Keep on keepin on
Few will recall me but I send people here for two reasons. One, when they want vaporizer information and when they want some if not the finest woodwork for this industry.
Love to see well the forum has done. Was never a doubt in my mind. Ok, back in the nether of smoking essence I go!
Beezleb!
Good morning everyone, so much greatness to come! Hoping you all have seen what I am doing over that the up and coming desktops thread, if not get your butts over there for a look!
@almost there I gotta agree bro that is most certainly a fine combo, one to be admired for a long time! I so wish I could help you out my man, when doing work for George I send all I have and any extras made so one laying around aint there, I do apologize. Will say that I have some nifty pieces to come that will mate up withe the VC that will be coming out with the WS very soon.
@Beezleb Wow bro I so remember you gosh its been a while, pls dont ever change your profile pic, I so appreciate all the kind words and have always been glad and get a grin every time I see you stop by. Be like you knocking at my door Id grin from ear to ear reaching out to you bro, thanks for that this morning! Pls pls check out the WS thread bro, I hope you will drop by there and let me know what you think of the direction I am heading in, am very excited and hope you will be a part of it in the future. Best wishes and thanks again for posting up, always good to see you!
@almost there I gotta agree bro that is most certainly a fine combo, one to be admired for a long time! I so wish I could help you out my man, when doing work for George I send all I have and any extras made so one laying around aint there, I do apologize. Will say that I have some nifty pieces to come that will mate up withe the VC that will be coming out with the WS very soon.
@Beezleb Wow bro I so remember you gosh its been a while, pls dont ever change your profile pic, I so appreciate all the kind words and have always been glad and get a grin every time I see you stop by. Be like you knocking at my door Id grin from ear to ear reaching out to you bro, thanks for that this morning! Pls pls check out the WS thread bro, I hope you will drop by there and let me know what you think of the direction I am heading in, am very excited and hope you will be a part of it in the future. Best wishes and thanks again for posting up, always good to see you!
Good morning everyone, been a bit since my last visit here, gosh with so much happening with the WS its been tough. All is well and all is good!
Wanted to stop by and do a Show & Tell this morning, many of you all know our guy here @Aezhenn is a true woodsman himself. He does great work in a variety of different ways, from craving to turning to anything really. He has become a good friend of mine and a solid to me, he has done some new pieces I wanted to have at my site and offer to anyone that is interested and get the word out for his work.
First off, he does these great wood storage tubes for the standard VC model
Made from Sapele, the length of it is at 4 3/8″ with an ID of 9/16″ X 4″ depth. Has the cork top that slips on the top and stays well and snug in place.
He has also done these nice Plenty Vape stands
as well as these Mighty Stands
These pieces are all well made, very sleek and definitely made with purpose. You can find them at my site at https://edstnt.com/ under the accessories section. As with all orders you get free shipping world wide!
Wanted to stop by and do a Show & Tell this morning, many of you all know our guy here @Aezhenn is a true woodsman himself. He does great work in a variety of different ways, from craving to turning to anything really. He has become a good friend of mine and a solid to me, he has done some new pieces I wanted to have at my site and offer to anyone that is interested and get the word out for his work.
First off, he does these great wood storage tubes for the standard VC model
He has also done these nice Plenty Vape stands
as well as these Mighty Stands
These pieces are all well made, very sleek and definitely made with purpose. You can find them at my site at https://edstnt.com/ under the accessories section. As with all orders you get free shipping world wide!
Alright and good morning to you all, I thought you all might like to see this and in fact @ataxian would like to see this more than anyone, so for a wee bit of Show & Tell,
Here is a 4" PTFE Solo stem I made, its rated for up to 500 degrees, the SS bushing can be easily removed for cleaning and such. I had it go out Monday for testing. I figure it will work out well and look to hear what you all think so maybe they can go to production!
Here is a 4" PTFE Solo stem I made, its rated for up to 500 degrees, the SS bushing can be easily removed for cleaning and such. I had it go out Monday for testing. I figure it will work out well and look to hear what you all think so maybe they can go to production!
Gosh everyone its been a bit since I was over here last, I wanted to let everyone know I have just made a released a new stem species for the Arizer Air, I did these in African Blackwood
You can grab these at my site. Also I have some great new additions from my guy at Wood4Vape, a must have for any Arizer Air user
The Arizer Air/Stem Wood Storage Case itself is 6 1/2″ in length x 2 1/2″OD. Has a tight fitting top that holds snugly ensuring your Air and stem stay in place. The depth of each cavity is just deep enough to store them both safely without moving up or down within the case. The Arizer Air/Stem Wood Storage Case can store any standard glass Air Stem as well as all my wood Air stems.
Also have these neat Arizer Air Stem Storage Tubes
The Arizer Air Aroma Stem Storage Tube measures at 4″ in length x 7/8″OD. The tube has a cork top that fits tight within ensuring your stem stays safe in place. The depth of each cavity allows for storing any of my 3″ wood Air Aroma Stems or standard Air glass stems.
Grab one now! Also have some more great stuff coming, just gotta shoot em and get em listed. A beautiful new species of VC Storage Tube w/magnetic bottom and even a Arizer Solo Glass Stem Storage Tube. Keep an eye out more goodies to come!
You can grab these at my site. Also I have some great new additions from my guy at Wood4Vape, a must have for any Arizer Air user
The Arizer Air/Stem Wood Storage Case itself is 6 1/2″ in length x 2 1/2″OD. Has a tight fitting top that holds snugly ensuring your Air and stem stay in place. The depth of each cavity is just deep enough to store them both safely without moving up or down within the case. The Arizer Air/Stem Wood Storage Case can store any standard glass Air Stem as well as all my wood Air stems.
Also have these neat Arizer Air Stem Storage Tubes
The Arizer Air Aroma Stem Storage Tube measures at 4″ in length x 7/8″OD. The tube has a cork top that fits tight within ensuring your stem stays safe in place. The depth of each cavity allows for storing any of my 3″ wood Air Aroma Stems or standard Air glass stems.
Grab one now! Also have some more great stuff coming, just gotta shoot em and get em listed. A beautiful new species of VC Storage Tube w/magnetic bottom and even a Arizer Solo Glass Stem Storage Tube. Keep an eye out more goodies to come!
ataxian
PALE BLUE DOT
Now your MODERNIZING your thought.Alright and good morning to you all, I thought you all might like to see this and in fact @ataxian would like to see this more than anyone, so for a wee bit of Show & Tell,
Here is a 4" PTFE Solo stem I made, its rated for up to 500 degrees, the SS bushing can be easily removed for cleaning and such. I had it go out Monday for testing. I figure it will work out well and look to hear what you all think so maybe they can go to production!
@SSVUN~YAH You know, I bought a solo for having a Ed'stnt blackwood stem with turquoise inlay long time ago... 
Everyone can be strike with WAS...
Everyone can be strike with WAS...
Good morning you all, all is good my way, hoping the same for everyone else! I just listed these at my site
Only got a couple to see how they would do, one sold as soon as I listed it. This is great piece now with the magnet it makes the storage tube even better. Our guy @Aezhenn is really doing a great job on all his W4V products, I suggest you grab one ASAP!
@turk You know I am going to do what I do bro! I got you on the Ti tips now and see you saw that also, quick grab on your part!
@ataxian I am glad you like what you see chief and will get you fixed up!
@SSVUN~YAH Give in bro dont fight it, I am sure you will love the AA!
Off to the shop yall, still working on Berlin!
@Aezhenn That was a nice piece I did for you back then, I hope you are enjoying it still!
Only got a couple to see how they would do, one sold as soon as I listed it. This is great piece now with the magnet it makes the storage tube even better. Our guy @Aezhenn is really doing a great job on all his W4V products, I suggest you grab one ASAP!
@turk You know I am going to do what I do bro! I got you on the Ti tips now and see you saw that also, quick grab on your part!
@ataxian I am glad you like what you see chief and will get you fixed up!
@SSVUN~YAH Give in bro dont fight it, I am sure you will love the AA!
Off to the shop yall, still working on Berlin!
@Aezhenn That was a nice piece I did for you back then, I hope you are enjoying it still!
Hey hey, glad you're still rocking yours but cant say that's my work, its our guy @Aezhenn he is a sure woodsman himself!
I offer what he has available at my site, have the VC tubes, Arizer air/stem case, mighty & plenty stands as well. If ya want anything custom you can pm him here. Have a look at my accessories section for an idea. Hope all is well your way a and thanks for stopping by!