Ed's TnT Wooden Vapor Tubes & Vapor Stems
- Thread starter Ed's TnT
- Start date
Can you stash 1 for me - I get paid tomorrow
You bet, thank you!
jambandphan03
in flavor country
Glad it was such a successful first run, and I'm also glad to have been able to get in on the first batch.
Just squeezed myself into the first_to_own_eds_solo_stems Club!
Sent ya an email regarding your order Sessnet, had an issue need you to get back to me to work it out! Still got ya though!
Ok, I am currently sold out of these! Its been overwhelming to say the least! All orders of these will go out first thing Monday the 21st. I have sold some to stores you all are really familiar with so if you gotta have one there will be some more out there in a week or two, however long it takes for them to get em available for sale at their sites. I will have more ready in 2-3 weeks, spent $1000 buying SS yesterday to make sure I have enough and not run out for a while. Have enough lumber to last a while also.
These tubes will have the 1/2" screen inserted within the SS, there will be a 1/2" internal retaining clip placed just over the screen inside the SS to hold the screen in place. The screen may stay in place without the clip but I didn't feel confident that it would, so that's why the clip is holding it snug. I don't want anyone out there using these somewhere and they blow out the load, screen goes with it, it gets lost, they may not have an extra screen to replace it rendering useless until another is inserted. These tubes will come with a 4-5"L x 1/4" OD dowel rod/ram rod that you may use to push the screen and clip out for cleaning and replacing the screen. The clip will have to be pushed back in over the screen to hold it in place if the user see's fit to do so. Also these fit so nice and tight within the unit, way better than the glass I have used. I have placed the tube in it and turning it upside down trying to shake it out, I have really gotta shake the hell out of it to get it to dislodge.
I am sure everyone will enjoy testing them and look forward to all feedback anxiously!
Good morning Darco, thanks for the kind words! Well am really looking to have these back available within 2-3 weeks. I know there will be some at a couple online vape stores bout the same time, with more to come. Have a bunch going out tomorrow!
Took a few pics last night, who doesn't like pics right!
Took a few pics last night, who doesn't like pics right!
Nic
Well-Known Member
Got mine!!! Went home on my lunch break for quick preliminary testing. Man, did I get some clouds. Draw is slightly better too. I'm wondering if lining up the notches with the vent holes with further improve flow? It matches very nicely with my 14/18 mm GonG adapter. I will definitely be doing more extensive testing tonight! Thanks Ed!!
PS: I'd love to purchase an additional clip to experiment with adding a second screen to hold in ABV. Ed, would you mind selling me a couple extra clips and screens or point me towards a link where they are being sold online? No rush, I know you must be busy launching the new product.
PS: I'd love to purchase an additional clip to experiment with adding a second screen to hold in ABV. Ed, would you mind selling me a couple extra clips and screens or point me towards a link where they are being sold online? No rush, I know you must be busy launching the new product.
Thats what I about Nic, glad you got it and have had a good first experience! Cant wait to hear about your extensive testing results. I plan on having a Solo tube accs. pkg to offer soon. I am sending out a sample to a company in the morning for custom fitting of the high temp silicone end cap that will shield the user from the heat still in the SS after use. I will be adding one of these free with every sale of a solo tube as soon as I have em available hopefully within a couple three weeks. Thinking that I will offer these in a 3 pc. deal with the a clip/screens pkg. as well. Hang in there with me Nic, these have moved faster than I had anticipated and am trying to get all my ducks in a row but nothing ever happens as quick as I would like except for you all's excitement in the tubes!
Thanks again Nic, I really appreciate your post and look forward to hearing more ASAP!
jambandphan03
in flavor country
My Ed's stem didn't come today, but that's ok, I'm happy to see people are starting to get theirs...
Nic
Well-Known Member
Some things I've noticed:
- I like to start this guy at 5, instead of my usual 3 or 4
- I like to give it an extra 30 seconds to warm up
- I will never use a stock stem again
jambandphan03
in flavor country
lookin' good Nic, boy glass has come a long way since those coke bottle bongs they used to sell at the shops 
Loving all these diffusers and bubblers. That stem looks like a tight fit. Can't wait for mine to get here, hoping tomorrow.
Loving all these diffusers and bubblers. That stem looks like a tight fit. Can't wait for mine to get here, hoping tomorrow.
Wow Nic thats what fuck I am talking about! You have a hella rig there and looks like it performs like a heavy hitter. Thanks for the post and most importantly the awesome feedback. No need to use a stock stem again, thats what I wanna hear!
Seems as though one of my customers has a 107 and says his new tube he got from me is loose and actually falls out. Hogleg sent me a 105 and when designing mine I wanted them super snug so the OD of the tubes has been turned down .580" and may vary by a .001 or .002 which is only the difference of a human hair. I had this issue in the back of my head that there may be a slight difference between the 105-107's but didnt think they would ever change the ID of the heat port.
Really glad you're happy Turk and like your findings! Pls do tell me what model you are using!
Pls all out there that got a tube from me do tell what model you are using and how it fits! I really need to know if there is any variances in ID sizes of the heat port from model to model.
I hope you all know how much I appreciate you all for being a part of these and really need your feedback! Thank you for being a part of this!
How bout these beauties I spun last night, 1k-3k year old Irish Bog Oak, wow the these make a great match for the black Solo!
Seems as though one of my customers has a 107 and says his new tube he got from me is loose and actually falls out. Hogleg sent me a 105 and when designing mine I wanted them super snug so the OD of the tubes has been turned down .580" and may vary by a .001 or .002 which is only the difference of a human hair. I had this issue in the back of my head that there may be a slight difference between the 105-107's but didnt think they would ever change the ID of the heat port.
Really glad you're happy Turk and like your findings! Pls do tell me what model you are using!
Pls all out there that got a tube from me do tell what model you are using and how it fits! I really need to know if there is any variances in ID sizes of the heat port from model to model.
I hope you all know how much I appreciate you all for being a part of these and really need your feedback! Thank you for being a part of this!
How bout these beauties I spun last night, 1k-3k year old Irish Bog Oak, wow the these make a great match for the black Solo!