Ed's TnT Wooden Vapor Tubes & Vapor Stems

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Nice line up @Snappo

I know the which are the Bog-Oak and Blackwood, but what types of wood are the others? Also, are the first three (from the left) 3", next 2" and two stems 4" in length?? Thanks... :tup:
@Gray Area - From left to right: 14mm Bog Oak 3"; 18mm Amboyna Burl 3-3/4"; 18mm Bog Oak 3-3/4"; 18mm Amboyna Burl 3"; 18mm Black wood 3"; 14mm Granadillo 4"; 14mm Amboyna 4". I use the shorter ones as both dry stem and Wong.
mV7zW3L.jpg
 

Ed's TnT

Woodsman
Manufacturer
@ataxian Damn it boy! The girl is probably the toughest one of em all I bet. I know what you mean, mines shoes keep getting smaller, legs keep getting longer, and want so much shit! Oh I am just waiting on them to get a little older so I can put their asses to work. I got sand paper that will fit their hands and plenty for em to do. Their time is coming!
 

ataxian

PALE BLUE DOT
@ataxian Damn it boy! The girl is probably the toughest one of em all I bet. I know what you mean, mines shoes keep getting smaller, legs keep getting longer, and want so much shit! Oh I am just waiting on them to get a little older so I can put their asses to work. I got sand paper that will fit their hands and plenty for em to do. Their time is coming!
You may know I'm a woodwork of exotics (mostly art pieces) however with my ATAXIA was getting too hard to operate my tools so I sold most of my big stuff. My boy's never liked to learn these skills. My daughter is an incredible artist (like her mom).
I have transfered my energy to gardening. (SAFER).

I would make what I need if I was whole. Lucky you have the skills!

We all have different interest and abilities!

Enjoy and be grateful!

When I close with CANNABIS is the HOLY GRAIL it's because it's true!
 
Last edited:

Radio

stay true to yourselves
You may know I'm a woodwork of exotics (mostly art pieces) however with my ATAXIA was getting too hard to operate my tools so I sold most of my big stuff. My boy's never liked to learn these skills. My daughter is an incredible artist (like her mom).
I have transfered my energy to gardening. (SAFER).

I would make what I need if I was whole. Lucky you have the skills!

We all have different interest and abilities!

Enjoy and be grateful!

When I close with CANNABIS is the HOLY GRAIL it's because it's true!
I can get caught up in consumerism and self-indulgence sometimes with all the beautiful products on FC, so thank's for always taking us back to the one truth.
holygrail-marijuana-holygrail-medical-cannabis-thcfinder-2390393d.jpg
 

Caligula

Maximus
Oh Jesus Christ, you had to find that picture.

Fuck those people.

Sorry side rant.

Greenworks was buying herb from some acquaintances of mine who are primo growers. Picked up their Skywalker OG, renamed it "Holygrail 619" (619 being a local area code), and told people they grew it in house, while charging a $10 premium over public sale prices from the grower.

So once again FUCK YOU GREENWORKS SD AND I'M GLAD YOU GOT RAIDED.

BTW I have a quarter oz of that stuff at home. My jyar is obviously labeled "Skywalker OG" and yes it is fucking AMAZING.
 
Last edited:

beach bum

Member
Hiya Ed! I think it's time to try a Nano (oh who am I kidding - I'm drooling over that thing) and I've PM'd @Snappo about some wood as would like a matching stem. I see you've now got turquoise to add a little "bling". You'll be hearing from me (or Snappo) soon with any luck.

Best to you and Mrs. Ed! :wave:

Edited to add: Ok...it's done. @Snappo found some beautiful wood and it'll be headed your way shorly. :D
 
Last edited:

Ed's TnT

Woodsman
Manufacturer
Well, hello, hello, hello! I hope all is well out there, been working a little here and there, not nearly as hard as I should be considering all the load I have on me. Should be giving it hell and working at least 12 hours a day but cant seem to muster enough mojo to get the fire lit in my ass! Spoke to a good friend yesterday for bout an hour who gave me some good advice, just gotta put the words to action is all and keep my head up looking for those better dayz! I did take a little time out and went with a couple of friends to the gun store and oh I fell in love with this bad boy right here


m2_20ga_-_max-5.png

Its by far the best gun I have ever owned. Its super light weight and is gonna make one hellova duck gun! I cant wait to get out in the blind with it and freaking slay em, its a semi auto and can deliver the steel. Damn it sure looks good! Maybe I can get the boys to pull some skeet for me and that will help shake a little of the funk off of me! Shooting shit is fun no matter what!

@beach bum You did good and am sure @Snappo done you very well picking out a sweet slab of burl also. Cant wait to work it up for you. Its been a while since I did anything for you, my work has come a long way and look forward to what you think of your newest piece. Hope all is well and wish you all the best!
 

Gray Area

Well-Known Member
@Ed's TnT going to be sending you a PM next few days as I've a beautiful Afzelia Burl blank from snappo that I'd like you to do something with. Apparently it's a bit longer than normal, so I'm hoping ther's enough for both a nano stem and 14mm GonG... I'll give you more details when I shoot you a PM...

Just wanted to ask if you still did the 3" blackwood stems for the Solo as they're not on the website - I'm assuming (hoping) you can do one for me when you do the custom nano stuff..?
Thanks, we'll talk more soon :tup:
 

Ed's TnT

Woodsman
Manufacturer
@Gray Area Good afternoon, I would be more than happy to do ya some custom work for the nano and the solo if you want! If there is enough in the blank to make a couple pieces I will sure try it. I took the 3" blackwood solo stems down a while back and have never put them back up, just keeping the regular stuff in stock is hard enough. I can do ya a 3" blackwood solo also. Just holla when you are ready and we will go from there! Hope all is well and thank you again for this opportunity!
 

KidFated.

Unknown Member
Ed bro, Remember the purpleheart UD stem you made me? I was looking for another UD stem, but I want this one to go around the heatport like the gongs do instead of inside like the nylon stems. Is this something you could do for me?
 

Ed's TnT

Woodsman
Manufacturer
Hello and good morning everyone, I hope all is well out there! Its been busy busy on my end as always, have been getting my oldest ready for football. Its his first year to play in the 7th grade, he is not the biggest kid out there by any means and is playing public school ball so he is gonna see some sho nuff big boys out there on the field. I am afraid that he is gonna get his ass knocked off and he is gonna loose his desire to play really quick. He's tough but I dont know how tough, time will tell.

@BOBCAT Hang in there with me bro, I am gonna work on custom stuff this coming week. I got a really nice picked out for you already my man!

@KidFated. You bet your ass I could do you something like that my friend! Let me know some particulars and I will make it happen!
 

Caligula

Maximus
Don't worry about your kid ed. I played football when I was in Jr High and a few years in HS. Never did weigh more than 150 lbs.

Anyway I found sports that better fit me but at least i got to try FB out to find out myself if I liked it or not. Even if he gets his ass handed to him, if he likes the sport he'll get back on the horse. Just be sure not to push him so hard that he feels obligated to do it for you. I had that experience with the piano, lol

BTW how's that secret project coming?
 

Ed's TnT

Woodsman
Manufacturer
What's goes good with a Pod?.. :/

Oh I got just the thing, katalox, very similar in color!

@Caligula I feel ya bro, I aint trying to push him at all, want him to do what he wants and just hope he doesnt get hurt is all! I am glad he is playing something other that PS3, he is a gamer for sure, just glad he is not in front of the tv all the time. Thanks for the words bro!
 

Ed's TnT

Woodsman
Manufacturer
Oh shit!!! I got that feeling too bro, going to scout the new duck lease next week, cant wait, just got access to 500 flooded acres of bliss! I smell what youre cooking! Hit me back when you can and let me know how the season looks for ya, maybe we could trade some hunts this year if youre up for it, could get ya in on some wild hog hunts maybe also. Good luck man, be safe those freakin snakes are still out there!

@Snappo I keep getting drawn back to the pic you posted above, what a fine collection you have my man, fine collection, thanks for posting it!
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Oh shit!!! I got that feeling too bro, going to scout the new duck lease next week, cant wait, just got access to 500 flooded acres of bliss! I smell what youre cooking! Hit me back when you can and let me know how the season looks for ya, maybe we could trade some hunts this year if youre up for it, could get ya in on some wild hog hunts maybe also. Good luck man, be safe those freakin snakes are still out there!

@Snappo I keep getting drawn back to the pic you posted above, what a fine collection you have my man, fine collection, thanks for posting it!
It is quite an amazing lineup of your stunning work! I find myself going back to that picture also! Incredible detail!!!
 
Top Bottom