David Goldstein's Fritted Disc

FLskwat

VAPOLITICS!
You should buy the DBV or the LSV bags for the tube or the bigger size cans as they are long round bags!
 
FLskwat,

jambandphan03

in flavor country
oops, too late, I just got the black version of the SSV bag. I hope it fits, if not, I have other bubs that might fit in there.
 
jambandphan03,

jambandphan03

in flavor country
Was looking at NVS glass shop drooling over the 18" tube when I realized that their shop is like a cpl miles from my old house. Like someone else was saying everything comes full circle, i can't wait to pick one of these up.

To you guys that got the tube it looks like it comes with a ti nail and everything is it all good stuff or should I budget for a nice dome and nail too?


Just wanted to update you, the 18" from NVS did not come with a nail, but did come with large dome.




any idea of the size for the tube bag? There is not any dimension info listed.
 
jambandphan03,

FLskwat

VAPOLITICS!
Just wanted to update you, the 18" from NVS did not come with a nail, but did come with large dome.





any idea of the size for the tube bag? There is not any dimension info listed.
Yes no nailz in any DG not even the convertibles (slide and conversion kit but no nailz as retail of a Ti is "too much" of a lose for the shop!!! ;-)
Bag sizes, yes roughly it is 12" (DBV) and 15" (LSV) but "extensible".
http://www.dimebagsstorage.com/
The best is that you go to the source and get your perfect size bag! ;)
 
FLskwat,

Xchadb

@Brownglass
Glass Blower
Careful, if they are quartz, I dont think it will work. I was explaining the Fritter to the lhs manager, and he mentioned that quartz is very bad for you to blow with, he said if a blower gets it into lungs, he is done blowing. I feel that's why it looks like DG makes his own out of Boro. Like I said, this came from my LHS manager, so I don't know how true it is. Something to look into though.
they were made to order, i think its prob boro...if not im pretty sure they can handle quartz. blowers use quartz all the time (for accents on the outside) but this being a flat colorless boring disc in a tube, i dont know if lungs are even necessary (if you put the disc in last)
 
Xchadb,

Xchadb

@Brownglass
Glass Blower
fizz bonding...its a whole new ritual i swear, not like any "water piece" you've ever had. For me its like my official scientific medicating device....not like oh lets go hit the bong. not a party piece, could be....but its just too personal for me, this thing is A+ on every level :)
 

jambandphan03

in flavor country
Yeah, I am really appreciating this piece so much more now. I have to say though, I do not regret my spur of the moment purchase of the mini can... I am really enjoying this DG 18". It's fun to light up with LEDs and make milk shot videos with...

:cheers: cheers!

BTW, nice outdoor video, and cool effect Tdub!! :cool:
 
jambandphan03,
  • Like
Reactions: t-dub

Xchadb

@Brownglass
Glass Blower
i must say with its light pull, this thing is so much easier on me throughout the week. In terms of a lot of things, its bigger than a bubbler to get me medicated faster, but wont take as long as my huge tripple perc. Also isnt nearly as bulky.
 

Xchadb

@Brownglass
Glass Blower
sorry but when i chopped the clip it ended up like that on accident, when i heard it the first time i busted up laughing so hard cause it just surpsied me, so i HAD to leave it just like that. glad to see someone mention it hahaha.

im really liking the abv oil high....strong muscle relaxant....not that common in a high for me...
 
Xchadb,
  • Like
Reactions: ogcook

jambandphan03

in flavor country
nice vid :tup: and good to know about the muscle relaxant of the ABV oil, I have a jar full ready to do a wash... think I know what I'm doing this evening... Should have the mini can Tomorrow! Can't wait! Did you freeze any of it before washing, or just run it at room temp?
 
jambandphan03,

Slightly Medicated

(SliM) Iron Lungs
I am thinking about picking up one of these. I am debating between the 18inch Tube and the 10.5inch bubbler. Does anyone have any experience with both? I have a concern about the tube. I like to sit the tubes in my lap and tilt them at an almost 45 degree angle. Will the fritted disk still work at that angle? I am concerned that the top of the fritted disk will not be in contact with the water so it will not bubble as well. If that is the case then I should probably go with the bubbler.

Edit: I thought about it some. I realized the Bubbler was the better option. I have a water pipe that I like quite allot. The reason I wanted a new piece was so that I could film video demonstrations easier. I currently have a water pipe with a cobalt colored beaker. It looks nice but it make sit hard to see the vapor milking in the chamber. It is also 18 inches and kind of hard to manage while trying to film a video. I can put the Bubbler on the table and sit near it. It will be easier to film in the long run. Also I can take smaller hits... sometimes i have to do multiple takes while filming a video... I noticed with my 18 inch water pipe after clearing bowl after bowl I got too medicated for my comfort level. This will allow me to film more but not use as much.
 
Slightly Medicated,
  • Like
Reactions: Organibis

jambandphan03

in flavor country
Well, I have the 18" tube, been using it for about a week, waiting on the UPS guy to deliver the mini can (bubbler) today. I was having to use the 18" in the same manor you mentioned, in my lap, and at a slight tilt. The nice thing about the tube is you can put quite a bit of water in there, so covering the disk shouldn't be an issue with enough water. Plenty of diffusion going on IMO... but i have to say, I am looking forward to getting the mini can for my desk use, as I found the long tube to be a little too awkward at my desk. It does work well on our dresser however, the perfect hight for standing and doing nail hits.
 
jambandphan03,

Slightly Medicated

(SliM) Iron Lungs
I think I made the right choice. Personally, I have not used anything below 18 inches in YEARS! I had to work myself down to about 20 inches from my usual 6 foot water pipe.... yea i know. I liked standing and one hitting a large piece. The punch to the lungs feels good. I wanted a bubbler in the first place. I figured it would be easier to film. The call of the 18 inch water pipe was strong. I decided it would not be a good decision though. I already keep 20 inch tall water pipe on my desk, two would just be way way to crowded. I ordered this one:

IMG_5197.jpg


I need to get a Female to Female adapter so I can use it with my VripTech and other male GonG vaporizers.

Is the rooster just a decal like the Syn logo? I might want to take that off... I have not decided. Do we know if it can be removed easily?
 

ilovebOObs

can i stick my male joint in there?
did you get that from nvs? also aqualabs have an adapter for $20, and its real beefy.
 
ilovebOObs,

Slightly Medicated

(SliM) Iron Lungs
I have found a couple...

PlanetVape has a 18mm female to 18mm female - straight/22.5 degree/45 degree for 19.99 There is no picture though.

http://www.planetvape.ca/18mm-to-18mm-adapters.html


AquaLabs has an 18mm female to 18mm female for 20.00

http://aqualabtechnologies.com/glass-accessories/alt-18-mm-female-to-18-mm-female-90-adapter.html

I wonder how much space there is from the Can to the Stem. I don't want to get an adapter that is too wide that it will not fit properly. I trust PlanetVape more because I have ordered from them before. Wish there were pictures though.
 

ilovebOObs

can i stick my male joint in there?
k guess they didn't get new stock in then. i have the aqualabs adapter, its wider then expected by i think it should still work. but its about 1.5" wide in total.

also did you ask for pics of it?
 
ilovebOObs,

Slightly Medicated

(SliM) Iron Lungs
Thanks for that measurement... I was wondering what it would be.

Does anyone have a Bubbler they can measure for me? I am looking at you @Flskwat :)

I don't want to buy the adapter if it will be too wide to fit. Thanks for anyone who can help me out.

Another way to do the measurement is someone who has a vapor dome from DG, if you can measure that diameter at the widest part. If it is wider then 1.5 inches then it should fit.
 
Slightly Medicated,
Top Bottom