Yeah - these baskets are flared/pleated so they aren't exactly 10mm. I'll shoot you a message when I have something ready to go
Custom 3D printed Widgets - Delta 3D Studios
- Thread starter Delta3DStudios
- Start date
Wonderful. Lookin forward to it.
AndyO
Well-Known Member
When you're talking "charging port" are you really just describing a stand with a hole for the charging cord?
Or are you trying to create a stand that will charge the Venty itself?
jbm
Not a Vapman “beta tester”
I’ve been using this unfrosted 18-10mm adapter with my tempest in the Prophet:
Reclaim / Dry Ash Catcher
Our Reclaim / Dry Ash Catcher is hand-crafted from 100% borosilicate glass for performance and cleanliness. This dual-function accessory captures resin and ash, ensuring a clog-free rig and reducing the need for regular cleaning.Our novel device features a removable 18mm to 10mm insert, allowing...
I'm talking a slot in the stand where the charging cable can slide into the bottom of the stand such that you can drop your vaporizer into the dock and charge. My latest iteration of the design is a *bit* too tight so I need to loosen the opening so it's easier to install the OEM charging cable, I also need to ensure there's enough height so there's minimal stress on the cable itself in the event you desire to remove the cable from the dock and use it as a simple stand
Happy weekend! Hope you're all doing great!
As I mentioned earlier, I've been diligently working on some cool aftermarket accessories for the Venty Vaporizer. I'm thrilled to announce that two of these awesome products are now live on the website!
First up, the Venty Charging Dock: This isn't just any stand; it's a blend of simplicity and elegance. Designed specifically for the OEM charging cable, it's a perfect addition to your setup. Plus, it's available in various colors to match your style! Check it out here: https://delta3dstudios.com/venty-charging-dock/
Next, the Venty Flexible Funnel: Say goodbye to messy loading. This funnel is a game-changer, ensuring a clean and effortless process every time. It's flexible, durable, and a must-have for every Venty owner. Take a closer look here: https://delta3dstudios.com/venty-flexible-funnel/
And that's not all! In a few weeks, I'll be publishing the Stainless Steel Venty Waterpipe Adapter, available in both 18mm and 14mm versions. Stay tuned for this!
A huge thank you to everyone for your continuous support and encouragement over the years. It's your enthusiasm and feedback that drive me to innovate and create. I'm grateful for this amazing community, and I can't wait to hear your thoughts on these new accessories.
Cheers!
As I mentioned earlier, I've been diligently working on some cool aftermarket accessories for the Venty Vaporizer. I'm thrilled to announce that two of these awesome products are now live on the website!
First up, the Venty Charging Dock: This isn't just any stand; it's a blend of simplicity and elegance. Designed specifically for the OEM charging cable, it's a perfect addition to your setup. Plus, it's available in various colors to match your style! Check it out here: https://delta3dstudios.com/venty-charging-dock/
Next, the Venty Flexible Funnel: Say goodbye to messy loading. This funnel is a game-changer, ensuring a clean and effortless process every time. It's flexible, durable, and a must-have for every Venty owner. Take a closer look here: https://delta3dstudios.com/venty-flexible-funnel/
And that's not all! In a few weeks, I'll be publishing the Stainless Steel Venty Waterpipe Adapter, available in both 18mm and 14mm versions. Stay tuned for this!A huge thank you to everyone for your continuous support and encouragement over the years. It's your enthusiasm and feedback that drive me to innovate and create. I'm grateful for this amazing community, and I can't wait to hear your thoughts on these new accessories.
Cheers!
AndyO
Well-Known Member
Happy weekend! Hope you're all doing great!
As I mentioned earlier, I've been diligently working on some cool aftermarket accessories for the Venty Vaporizer. I'm thrilled to announce that two of these awesome products are now live on the website!
Next, the Venty Flexible Funnel: Say goodbye to messy loading. This funnel is a game-changer, ensuring a clean and effortless process every time. It's flexible, durable, and a must-have for every Venty owner. Take a closer look here: https://delta3dstudios.com/venty-flexible-funnel/
A huge thank you to everyone for your continuous support and encouragement over the years. It's your enthusiasm and feedback that drive me to innovate and create. I'm grateful for this amazing community, and I can't wait to hear your thoughts on these new accessories.
Cheers!
They both look great! Although I think I'll wait for the WPA before I order.
Excellent job man.
RustyOldNail
SEARCH for the treasure...
Happy weekend! Hope you're all doing great!
As I mentioned earlier, I've been diligently working on some cool aftermarket accessories for the Venty Vaporizer. I'm thrilled to announce that two of these awesome products are now live on the website!
Next, the Venty Flexible Funnel: Say goodbye to messy loading. This funnel is a game-changer, ensuring a clean and effortless process every time. It's flexible, durable, and a must-have for every Venty owner. Take a closer look here: https://delta3dstudios.com/venty-flexible-funnel/
A huge thank you to everyone for your continuous support and encouragement over the years. It's your enthusiasm and feedback that drive me to innovate and create. I'm grateful for this amazing community, and I can't wait to hear your thoughts on these new accessories.
Cheers!
Just placed my order for both, thanks!
Happy Tuesday everyone!
I hope everyone is doing well, 2024 is certainly off to a better start than last year (screw 2023, worst year of my life in so many ways!)
I know many of you are still eagerly waiting on my new basket-screen press and I promise I'm still working on that design! I'm nearly there but currently trying to design a smaller 12mm basket screen using a 3/4-inch screen (instead of 1-inch screen which works perfectly to make a deep basket screen). But we're almost there, it's high on my priority list. Soon as I finalize the 12-mm baskets, I'll work on a smaller 10-mm basket screen press as well - these basket screen presses are designed to work with most any desktop/bench vice
Also as an update on the Venty vaporizer steel waterpipe adapters - the first large batch sold out much faster than expected and I am currently waiting for my metal printing partner to finish the batch (hopefully within the next week or so!) so that I can confirm the fit/function before opening the store to accept pre-orders for my next batch of steel waterpipe adapters. I'm sure they will sell out quickly again as I will likely continue with small batches as I gather feedback from early adopters.
In other news, I've been working with a sales rep from Storz & Bickel to create a series of nice display stands for their trade show needs
! I've just published two new display stands to my website, as well as updated the Plenty vaporizer stand to match the new design. If you're visiting the Champs show in Vegas this week, be sure to stop by the Storz & Bickel booth and check them out! Be sure to tell them Delta 3D Studios sent ya! 
Here's my updated Plenty stand: https://delta3dstudios.com/plenty-stand/
The new Mighty+ Display Stand: https://delta3dstudios.com/mighty-display-stand/
And a Crafty+ Display Stand: https://delta3dstudios.com/crafty-display-stand/
Thanks everyone for your continued support - D3DS wouldn't be here continuing to innovate without your patronage
I hope everyone is doing well, 2024 is certainly off to a better start than last year (screw 2023, worst year of my life in so many ways!)
I know many of you are still eagerly waiting on my new basket-screen press and I promise I'm still working on that design! I'm nearly there but currently trying to design a smaller 12mm basket screen using a 3/4-inch screen (instead of 1-inch screen which works perfectly to make a deep basket screen). But we're almost there, it's high on my priority list. Soon as I finalize the 12-mm baskets, I'll work on a smaller 10-mm basket screen press as well - these basket screen presses are designed to work with most any desktop/bench vice
Also as an update on the Venty vaporizer steel waterpipe adapters - the first large batch sold out much faster than expected and I am currently waiting for my metal printing partner to finish the batch (hopefully within the next week or so!) so that I can confirm the fit/function before opening the store to accept pre-orders for my next batch of steel waterpipe adapters. I'm sure they will sell out quickly again as I will likely continue with small batches as I gather feedback from early adopters.
In other news, I've been working with a sales rep from Storz & Bickel to create a series of nice display stands for their trade show needs
! I've just published two new display stands to my website, as well as updated the Plenty vaporizer stand to match the new design. If you're visiting the Champs show in Vegas this week, be sure to stop by the Storz & Bickel booth and check them out! Be sure to tell them Delta 3D Studios sent ya! Here's my updated Plenty stand: https://delta3dstudios.com/plenty-stand/
The new Mighty+ Display Stand: https://delta3dstudios.com/mighty-display-stand/
And a Crafty+ Display Stand: https://delta3dstudios.com/crafty-display-stand/
Thanks everyone for your continued support - D3DS wouldn't be here continuing to innovate without your patronage
Howdy y'all!
Hope all is well. Things have been quite busy around the studio with most of the print-farm running non-stop for the past six weeks keeping up with retailer needs as they stock up for 4/20!
I know many of you are patiently waiting on the release of my new v2 Venty stainless steel waterpipe adapters. To keep a VERY long story short, I had a quality control issue with my first batch of Venty adapters where the 18mm joints were warping slightly during the annealing process causing them to not form an air-tight seal with glass joints. I went back to the drawing board and revised the design to use high-temp O-rings to hopefully get an air-tight seal. My next small test-batch of adapters should be done any day now so I can confirm they function as desired, and take updated photos for the store listing - once I know they work as intended, I'll open the store to accept pre-orders for the next batch of inventory.
Additionally I've been working on a new stainless steel cooling-unit insert for the TinyMight2 stems designed to triple the airflow distance, turning a 30mm insert into a 90mm maze for the vapor to cool down before exiting the mouthpiece. Once I confirm my test print functions as intended, I'll begin accepting pre-orders for a small batch of these adapters (which can be customized to any insert length desired). Fingers crossed the new design functions as intended! I can't wait to share some photos of the design.
As another update, work continues perfecting the basket screen presses. I've got a 10mm version essentially finished, and coming up next will be a 9mm and 12mm shortie basket press models - if you want to help test any of these sizes, send me a private message to cover shipping costs and I'll mail you a bunch of test screens to play with.
I've got a new batch of 10mm basket screens shipping out for beta-testing - the new v2 basket screen press design is complete and ready to be published as soon as I confirm these basket screens fit as intended (12mm is also nearly ready to go - thank you for the beta-testers who tested those baskets and reported your feedback). If only I had spare 3D printers in the farm available to print the finished prototypes
.
Also note that I've just published several new products to the website - Zeus ArcPod Loading tray, and Xmax V3 Pro loading tray, plus spacers for the loading trays if you desire to fill less than ten capsules at a time.
Lastly - don't forget I'm running one of my best sales of the year this month on my website. Visit the homepage and check out the banner advertisement for more details! Sale ends April 30th, limit one per customer
Hope all is well. Things have been quite busy around the studio with most of the print-farm running non-stop for the past six weeks keeping up with retailer needs as they stock up for 4/20!
I know many of you are patiently waiting on the release of my new v2 Venty stainless steel waterpipe adapters. To keep a VERY long story short, I had a quality control issue with my first batch of Venty adapters where the 18mm joints were warping slightly during the annealing process causing them to not form an air-tight seal with glass joints. I went back to the drawing board and revised the design to use high-temp O-rings to hopefully get an air-tight seal. My next small test-batch of adapters should be done any day now so I can confirm they function as desired, and take updated photos for the store listing - once I know they work as intended, I'll open the store to accept pre-orders for the next batch of inventory.
Additionally I've been working on a new stainless steel cooling-unit insert for the TinyMight2 stems designed to triple the airflow distance, turning a 30mm insert into a 90mm maze for the vapor to cool down before exiting the mouthpiece. Once I confirm my test print functions as intended, I'll begin accepting pre-orders for a small batch of these adapters (which can be customized to any insert length desired). Fingers crossed the new design functions as intended! I can't wait to share some photos of the design.
As another update, work continues perfecting the basket screen presses. I've got a 10mm version essentially finished, and coming up next will be a 9mm and 12mm shortie basket press models - if you want to help test any of these sizes, send me a private message to cover shipping costs and I'll mail you a bunch of test screens to play with.
I've got a new batch of 10mm basket screens shipping out for beta-testing - the new v2 basket screen press design is complete and ready to be published as soon as I confirm these basket screens fit as intended (12mm is also nearly ready to go - thank you for the beta-testers who tested those baskets and reported your feedback). If only I had spare 3D printers in the farm available to print the finished prototypes
.Also note that I've just published several new products to the website - Zeus ArcPod Loading tray, and Xmax V3 Pro loading tray, plus spacers for the loading trays if you desire to fill less than ten capsules at a time.
Lastly - don't forget I'm running one of my best sales of the year this month on my website. Visit the homepage and check out the banner advertisement for more details! Sale ends April 30th, limit one per customer
Last edited:
Hey all!
Thanks to everyone for their patience over the past few weeks - my farm has been BUSY keeping up with wholesale orders, while I try to squeeze in retail orders when possible (I swear none of my machines have stopped running in over 8 weeks!
)
Anyway I'm happy to report that the my new v2 Venty Waterpipe adapters fit/function as intended with the help of some high-temp O-rings so I am now taking pre-orders for my next batch - I have updated photos but haven't had a chance to edit/publish to the store just yet. This will be another limited batch so don't miss your opportunity!
Also keep in mind my 4/20 sale ends April 30th so don't miss your chance for one of my best sales of the year (YES - Venty WPA preorders also qualify for the 4/20 sale
)
Lastly, I understand that there are now TinyMight2 capsules on the market. I believe they are the same size as HealthyRips Rogue capsules, however if someone has digital calipers and can message me the diameter and height of the capsule (with and without the lid installed), that would be extremely helpful for me to revise/publish a TM2 capsule loading tray for the website.
Thanks to everyone for their patience over the past few weeks - my farm has been BUSY keeping up with wholesale orders, while I try to squeeze in retail orders when possible (I swear none of my machines have stopped running in over 8 weeks!
)Anyway I'm happy to report that the my new v2 Venty Waterpipe adapters fit/function as intended with the help of some high-temp O-rings so I am now taking pre-orders for my next batch - I have updated photos but haven't had a chance to edit/publish to the store just yet. This will be another limited batch so don't miss your opportunity!
Also keep in mind my 4/20 sale ends April 30th so don't miss your chance for one of my best sales of the year (YES - Venty WPA preorders also qualify for the 4/20 sale
)Lastly, I understand that there are now TinyMight2 capsules on the market. I believe they are the same size as HealthyRips Rogue capsules, however if someone has digital calipers and can message me the diameter and height of the capsule (with and without the lid installed), that would be extremely helpful for me to revise/publish a TM2 capsule loading tray for the website.
Handwritten in millimeters, but I hope it helps
Thank you so much! Message me your email address, I'll give you a store credit for your help
Long story short, they are a huge PITA to make due to the humidity in my climate - it takes a day preparing the raw material and most of a day to print the larger oversized case.
However I can still make them as a special order request, just send me a private message with what size you want and what color, I can send you a link to add a custom order to the shopping cart.
Mickk
Well-Known Member
That's very kind, thank you! I just sent a dm
Hey everyone!
Hope you all had a fantastic holidaze season! It's been a whirlwind of activity on my end— I've been running the printer farm non-stop for the past few months to keep up with demand from wholesale partners. But, things have slowed down and I've managed to carve out some time to finalize a couple of products that have been in the works for a bit.
I'm thrilled to share that after years of brainstorming since the original v1 basket screen press was discontinued, the v2 Basket Screen Press is finally here! This new version is a game-changer, transforming standard round screens into pleated basket screens, available in four sizes: 9.0mm, 10.5mm, 12mm Short, and 12mm Deep baskets. I came up with a versatile design to work seamlessly with any standard desktop bench vice that can open at least 2.5 inches, it's ready to up your vaping game. Check it out here:
delta3dstudios.com
These pleated basket screens are perfect replacements for OEM screens in devices like the E-Nano, TinyMight, or Phase3 vaporizers, and the 12mm deep baskets can even serve as a secondary screen in 18mm waterpipe adapters, keeping your glass and water clean and free from debris. If you're curious about sizes, I've got pre-pressed screens available in 5-packs here: https://delta3dstudios.com/basket-screens-5-pack/
Not sure which size will fit your setup, or looking for a custom size? Don't hesitate to drop me a message—I'm here to help!
Looking forward to hearing what you all think!
Hope you all had a fantastic holidaze season! It's been a whirlwind of activity on my end— I've been running the printer farm non-stop for the past few months to keep up with demand from wholesale partners. But, things have slowed down and I've managed to carve out some time to finalize a couple of products that have been in the works for a bit.
I'm thrilled to share that after years of brainstorming since the original v1 basket screen press was discontinued, the v2 Basket Screen Press is finally here! This new version is a game-changer, transforming standard round screens into pleated basket screens, available in four sizes: 9.0mm, 10.5mm, 12mm Short, and 12mm Deep baskets. I came up with a versatile design to work seamlessly with any standard desktop bench vice that can open at least 2.5 inches, it's ready to up your vaping game. Check it out here:
Basket Screen Press V2
3D Design and Fabrication Studio offering 3D Printed Widgets
delta3dstudios.com
These pleated basket screens are perfect replacements for OEM screens in devices like the E-Nano, TinyMight, or Phase3 vaporizers, and the 12mm deep baskets can even serve as a secondary screen in 18mm waterpipe adapters, keeping your glass and water clean and free from debris. If you're curious about sizes, I've got pre-pressed screens available in 5-packs here: https://delta3dstudios.com/basket-screens-5-pack/
Not sure which size will fit your setup, or looking for a custom size? Don't hesitate to drop me a message—I'm here to help!
Looking forward to hearing what you all think!
Last edited:
Ramahs
Fucking Combustion (mostly) Since February 2017
Hey everyone!
Hope you all had a fantastic holidaze season! It's been a whirlwind of activity on my end— I've been running the printer farm non-stop for the past few months to keep up with demand from wholesale partners. But, things have slowed down and I've managed to carve out some time to finalize a couple of products that have been in the works for a bit.
I'm thrilled to share that after years of brainstorming since the original v1 basket screen press was discontinued, the v2 Basket Screen Press is finally here! This new version is a game-changer, transforming standard round screens into pleated basket screens, available in four sizes: 9.0mm, 10.5mm, 12mm Short, and 12mm Deep baskets. I came up with a versatile design to work seamlessly with any standard desktop bench vice that can open at least 2.5 inches, it's ready to up your vaping game. Check it out here:Basket Screen Press V2
3D Design and Fabrication Studio offering 3D Printed Widgets
These pleated basket screens are perfect replacements for OEM screens in devices like the E-Nano, TinyMight, or Phase3 vaporizers, and the 12mm deep baskets can even serve as a secondary screen in 18mm waterpipe adapters, keeping your glass and water clean and free from debris. If you're curious about sizes, I've got pre-pressed screens available in 5-packs here: https://delta3dstudios.com/basket-screens-5-pack/
Not sure which size will fit your setup, or looking for a custom size? Don't hesitate to drop me a message—I'm here to help!
Looking forward to hearing what you all think!
I love the idea of a basket screen press I can use at home. And I especially love that you've designed it to be used with one's own press.
However, I don't like having to buy a different one for each screen size I may need. Any chance one is in the making where you can just change out the metal pieces for different size screens?
Totally get it - that was something I considered. Unfortunately each basket size uses a different size press pin and forming collar for the screens - there was no easy way to keep things fully aligned if I made it universal.
I could sell the two 12mm (short and deep) as a kit since they both use the same press pin (but different types of forming collars), contact me if that's the size you were looking at.
Last edited:
Ramahs
Fucking Combustion (mostly) Since February 2017
Cool. Just figured I'd ask. I'd want the pins to be threaded in or something so one could just screw one off, and screw another in.
I feel like I've had press kits for hydraulic presses before where the die on the end, and the hole it goes into, was able to be changed out.
I feel like I've had press kits for hydraulic presses before where the die on the end, and the hole it goes into, was able to be changed out.
Mickk
Well-Known Member
Shoutout to @Delta3DStudios for doing custom prints. Supper happy with the case for my TinyMight 2 and the scoop. Love 'em both!
Happy Summer, y'all! 
I hope everyone is managing to stay cool during this blazing summer season—I'm sweating buckets over here!
First off, a huge shout-out to all my repeat customers. Your unwavering support keeps this venture thriving, even through slower periods. Thank you from the bottom of my heart—I literally couldn't do this without you all!
Important Update: After a solid decade of partnership, my industrial printing partner, who specialized in stainless steel and nylon 3D printing, has unexpectedly filed for bankruptcy . This has temporarily affected my inventory, especially items like the Venty waterpipe adapters, which are out of stock for now. I'm actively seeking new printing partners to ensure prices remain affordable and standards meet expectations, I plan to test a small batch of inventory soon. I'll keep you updated as I adapt to these changes. Meanwhile, items like most nylon and steel scoop tools are still available, but hurry—they're moving fast!
Exciting News: I’m thrilled to announce a new partnership with Joda Glassworks (@VaPeD&CoNfUsEd). I'm now stocking some of his most popular items on my storefront, including 14mm Waterpipe adapters for the E-Nano XL (both standard and carbureted editions), along with a dimpled cooling stem that’s compatible with both the TinyMight and E-Nano XL vaporizers. All three items are in stock and ready to ship!
Summer of Savings: Dive into my summer sale with 20% OFF STOREWIDE, running now through August 15th! No coupon code needed—the discount automatically applies at checkout. It’s the perfect time to stock up or try something new.
As always, thanks for your continued support. Remember, summer is the best time to submit custom order requests as I have more bandwidth to dedicate to unique projects. However, I tend to scale back on custom orders once winter approaches, so don’t wait!
Stay cool and vape on!
I hope everyone is managing to stay cool during this blazing summer season—I'm sweating buckets over here!
First off, a huge shout-out to all my repeat customers. Your unwavering support keeps this venture thriving, even through slower periods. Thank you from the bottom of my heart—I literally couldn't do this without you all!
Important Update: After a solid decade of partnership, my industrial printing partner, who specialized in stainless steel and nylon 3D printing, has unexpectedly filed for bankruptcy
. This has temporarily affected my inventory, especially items like the Venty waterpipe adapters, which are out of stock for now. I'm actively seeking new printing partners to ensure prices remain affordable and standards meet expectations, I plan to test a small batch of inventory soon. I'll keep you updated as I adapt to these changes. Meanwhile, items like most nylon and steel scoop tools are still available, but hurry—they're moving fast!Exciting News: I’m thrilled to announce a new partnership with Joda Glassworks (@VaPeD&CoNfUsEd). I'm now stocking some of his most popular items on my storefront, including 14mm Waterpipe adapters for the E-Nano XL (both standard and carbureted editions), along with a dimpled cooling stem that’s compatible with both the TinyMight and E-Nano XL vaporizers. All three items are in stock and ready to ship!
Summer of Savings: Dive into my summer sale with 20% OFF STOREWIDE, running now through August 15th! No coupon code needed—the discount automatically applies at checkout. It’s the perfect time to stock up or try something new.
As always, thanks for your continued support. Remember, summer is the best time to submit custom order requests as I have more bandwidth to dedicate to unique projects. However, I tend to scale back on custom orders once winter approaches, so don’t wait!
Stay cool and vape on!
Howdy y'all!
Hope you're all enjoying this gorgeous fall weather as much as I am, especially after our sizzling summer
. The last few months have been quieter than usual, which gave me ample time to tinker in the studio and create some new widgets—with many more on the horizon.
While I won't overload you with all the latest product launches (you can check out the Delta3DStudios homepage for new listings), I'm excited to share some fantastic news.
As some of you might remember, my long-time industrial printing partner who specialized in stainless steel and nylon parts unfortunately closed down a few months back. But, I'm thrilled to announce that I've teamed up with a new industrial printing partner—and the results are nothing short of stunning. Our stainless steel items now boast a beautiful polished finish that many of you have requested over the years, and I'm delighted to deliver on that at last. Plus, I've managed to slash the prices for both my Nylon and Steel accessories by nearly HALF!
I'm also happy to let you know that our stainless steel Venty Waterpipe adapters are back in stock and available at much lower prices!
Thanks for your continued interest and support. As always, happy vaping and stay tuned for more exciting updates!
Hope you're all enjoying this gorgeous fall weather as much as I am, especially after our sizzling summer
. The last few months have been quieter than usual, which gave me ample time to tinker in the studio and create some new widgets—with many more on the horizon.While I won't overload you with all the latest product launches (you can check out the Delta3DStudios homepage for new listings), I'm excited to share some fantastic news.
As some of you might remember, my long-time industrial printing partner who specialized in stainless steel and nylon parts unfortunately closed down a few months back. But, I'm thrilled to announce that I've teamed up with a new industrial printing partner—and the results are nothing short of stunning. Our stainless steel items now boast a beautiful polished finish that many of you have requested over the years, and I'm delighted to deliver on that at last. Plus, I've managed to slash the prices for both my Nylon and Steel accessories by nearly HALF!
I'm also happy to let you know that our stainless steel Venty Waterpipe adapters are back in stock and available at much lower prices!
Thanks for your continued interest and support. As always, happy vaping and stay tuned for more exciting updates!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Oh those look spectacular! Fantastic news, love that finish on the SS now, and nylon is always great... Half the price even better!!
Absolutely, my new partner exceeded my expectations. So of course I'm going to pass the savings on to my customers and get back to making fun scoop tools and other high-temp accessories at reasonable prices. Best of all, my new partner is also located in the country so I can still proudly say "Made in America".