Custom 3D printed Widgets - Delta 3D Studios

[StormyPinkness]

Evening all!

So much exciting stuff happening around the studio, I've got a few new products nearly finished development and I can't wait to share them.

However, due to the ravaging success of my first two "Nearly Universal" adapters, I've decided to release a new "larger" version which has a large 16mm opening (it can stretch a bit if needed), and tapers to a smaller diameter so it can handle a large variety of vapes.

Allow me to introduce the Large Nearly Universal Adapter (Large NuSonG)

Stay tuned for more exciting announcements in the coming weeks. I'm trying to get in some large expenses before the end of the year!

Nice, I love these things. I'll have to ask again how big the apollo tube is. The tube might fit inside this one, right now I just squeeze my song into the tube.

 

[Delta3DStudios]

I'll have to ask again how big the apollo tube is. The tube might fit inside this one, right now I just squeeze my song into the tube.

Once you find out the OD of the tube, let me know and I'll tell you if it would fit, but I'm betting it should!

 

[Silat]

Me...I'm still on the sidelines with this one.

We agree. Scary thought
There are just too many people that are having issues with the unit for me to purchase.
And that the company is posting positive reviews without the negatives leaves a bad taste.
I am certain that there are many satisfied customers.
But it is certain that there are more than a few unsatisfied purchasers posting.
Too many from what you, I and others have read.
They cannot all be unable to inhale in the correct way to make the product work properly.

I have no doubt that when the unit functions properly it is "amazing".

 

[Delta3DStudios]

TGIF All!

Just a reminder that submissions for my Sticker Contest are due by 23:59 EST tonight. I'd like to ask everyone else to please stop by and cast your "vote" (like) for your favorite entries!

 

[ChooChooCharlie]

Let us all send positive vibes to @Ratchett who is in the path of the Hurricane today and tonight. Please be patient with him in the next few weeks as he will almost certainly lose power.

Hope you got away from the coast, @Ratchett

And THANK YOU for the freebies you sent in my latest order!
What I ordered on the left, freebies on the right:

Look at how I'm abusing the E-Nano Urchin stand:

 

[subway13029]

as is ratchett is in the path so is myself pretty close but our very own @stickstones is close as well prayers to everyone near the storm..much love..

 

[Delta3DStudios]

Morning all! I'm happy to report we survived the storm with no damage and the power has finally been restored. Apologies to anyone who's orders haven't been shipped yet, had to shut down and weatherproof the printers for a few days just in case things got worse (some spaghetti models predicted it would make landfall and then go right over my house!!)

as is ratchett is in the path so is myself pretty close but our very own @stickstones is close as well prayers to everyone near the storm..much love..

Being on the east coast I was relatively spared from the major damage of the storm while Matthew rolled 35 miles east of me still at sea. You guys up there got it WAY worse than us down here! Thoughts and prayers to everyone in northern Florida, and the Georgia / South Carolina coastlines!!


In other news, I've been talking with an experienced CAD designer whom I'd like to employ for some of my larger projects. I've got something up my sleeve I've been working on for almost two years now and I'm nearly ready for mass-production, can't wait to share this one with the world - I've been using a prototype for a year now and use it with EVERY vaporizer I own because it just makes life easier

 

[NickDlow]

In other news, I've been talking with an experienced CAD designer whom I'd like to employ for some of my larger projects. I've got something up my sleeve I've been working on for almost two years now and I'm nearly ready for mass-production, can't wait to share this one with the world - I've been using a prototype for a year now and use it with EVERY vaporizer I own because it just makes life easier

 

[Dynalowrider]

Mike, remember the case you made for the Haze cans? How about a case for VapXhale ELB's? They come in a pack of four. Maybe alternate the direction they face so the lip takes less space. I also have an idea for stealth mode for the Boundless CFX, a stand for supporting a CFX on a MFLB orbiter, a filling "station" for the ELB's, a filling "Station" for VapCap's.
We just need Boundless to send you a vape to scan.
Hint, hint, "We just need Boundless to send you a vape to scan". Come on people, "the squeaking wheel gets the grease". Let them know you need Ratchett to make you some accessories, (for those who can't take a hint). Doc

 

[Delta3DStudios]

Haha, thanks Doc! I love the ideas. Now that I know how popular the ELB's are getting, I think it's time I do make a special ELB case and maybe a tray to load multiple ELB's at one time

 

[TeeJay1952]

ELB Punch (love my basket nano/udog punch)

 

[subway13029]

what ever happen with the s and b capsule loader?

 

[Delta3DStudios]

what ever happen with the s and b capsule loader?

Welllllll, since you asked nicely. Here's a sneak peak......

Been working on it for a while now, should be done soon (the 2x1 configuration is just to save plastic on prototype prints - final version will likely be a 4x2)

 

[subway13029]

Awesome!! Nice man..

 

[subway13029]

aww look at.my little capsules sitting in their newly created filling station..i miss.the little guys..they look so big.and mature...yeah im stupid and high..

 

[MinnBobber]

Welllllll, since you asked nicely. Here's a sneak peak......

Been working on it for a while now, should be done soon (the 2x1 configuration is just to save plastic on prototype prints - final version will likely be a 4x2)

.................................................

So, loading is the easy part. What's the procedure for removing without spilling and getting the covers on?
Thanks

 

[Delta3DStudios]

So, loading is the easy part. What's the procedure for removing without spilling and getting the covers on?

Well I can't spoil ALL the secrets just yet now can I?? I'll have more info when I print the finished version and take some nicer (cleaner!) pictures

 

[newVaper420]

Ok so I got my adapters and everything... How do you clean them? The 18-14mm reducer is picking up all sorts of lint and stuff...... Just want to make sure it's absolutely safe to use :-). Been using with my grasshopper. It's awesome.

 

[Delta3DStudios]

Ok so I got my adapters and everything... How do you clean them? The 18-14mm reducer is picking up all sorts of lint and stuff...... Just want to make sure it's absolutely safe to use :-). Been using with my grasshopper. It's awesome.

Lol, that glossy finish on the silicone does make it a lint magnet, I'll admit

My silicone rubber is safe to clean with any traditional glass cleaning chemicals - ISO, PBW, hell even boiling water is safe for the silicone!

The only thing I found that doesn't work on my silicone, is a blow torch

 

[newVaper420]

Lol, that glossy finish on the silicone does make it a lint magnet, I'll admit

My silicone rubber is safe to clean with any traditional glass cleaning chemicals - ISO, PBW, hell even boiling water is safe for the silicone!

The only thing I found that doesn't work on my silicone, is a blow torch

I really love the mini funnel for the grasshopper. Holy shit, that thing is incredible :-).

 

[Dynalowrider]

Does anybody on here have ideas for a loading/filling station for the VapCap? An Urchin type stand with a place for magnets, holes for holding the VapCap by the mouthpiece for filling w/nugs.
I have an idea for using the magnet on the top of the CFX to help secure the CFX, (with WPA), on the MFLB Orbiter.
Got any other ideas? Here's your chance to say, "I've got an idea."
Doc

 

[Delta3DStudios]

Does anybody on here have ideas for a loading/filling station for the VapCap? An Urchin type stand with a place for magnets, holes for holding the VapCap by the mouthpiece for filling w/nugs.

by all means someone gimme a list of what they wanna store on a stand and what shape of stand they like and I'll make it work!

 

[Vape Donkey 650]

omg, Ratchett, how was I not aware of this? Is this new? Did I miss the announcement? I've made a few failed attempts at adapting my trusty "PPWT" pinnacle water tools to my crafty, but I've been disappointed and dissatisfied how having this water tool stick out diagonally, sideways, attached to the default straw, makes the whole piece feel awkward and imbalanced, you can't easily set it down without tipping over, and this particular water tool can't be rested sidways (flat)

The only way to really make this work is to have the water tool be straight upwards from a custom cooling-unit top piece! And you've made it! I WANTS! ! ! !

I also sent you some more sketches for another custom vape stand, so maybe I can wait till you can make all this stuff in a big order, and save on shipping? I can wait....but this crafty water tool adapter... eye wantz it....

 

[Delta3DStudios]

omg, Ratchett, how was I not aware of this? Is this new? Did I miss the announcement? I've made a few failed attempts at adapting my trusty "PPWT" pinnacle water tools to my crafty, but I've been disappointed and dissatisfied how having this water tool stick out diagonally, sideways, attached to the default straw, makes the whole piece feel awkward and imbalanced, you can't easily set it down without tipping over, and this particular water tool can't be rested sidways (flat)

The only way to really make this work is to have the water tool be straight upwards from a custom cooling-unit top piece! And you've made it! I WANTS! ! ! !

Lol, damn you guys are fast! Indeed yesterday I finally published my Crafty CU-Mod. After the wild success of my Mighty CU-MOD, It was a project I'd been thinking about for at least a year but had no time/access to make one. However I finally got a cooling unit thanks to a fellow FC member and I was able to trace the profile and design the finished parts. Sadly it took me at least two months to FINALIZE this part (the mold went through at least 5 revisions before finally getting a good fit).

Making big moves with the business right now folks. I'm making some huge investments, and hiring some new talent to help take this business to the next level. I apologize to everyone for the recent delays in shipping and responding to emails. I hate making people wait, but there's just not enough time in one day to do everything I want/need!

Thank you again to all of my friends and customers, I wouldn't be here without your support

 

[cloudsosmoke]

@Ratchett

just a FYI

im in UK
ive got two adapters.. (thanks - they work nicely)
both times there was a tax and handling charge
that increased the cost (proportionately.. quite a bit)

but my vapcap also from US - which cost more - didnt get taxed at all


i dont know if this experience is same in other EU countries


thinking you might be able to re-label them or something
..i dont really know
i dont have the packaging any more to check what was the difference between them

hopefully other FC members will know more

oh and good luck with your expansion!