ConVex by Entheos Devices (formerly Tokedvapors)

PPN

PPN

Volute of Vapor
Hi, I tested the @Improvaper idea with my TKV right after I seen the post... since I replaced the bowl by the Bowle ceramic bowls (yes a lot of bowles, isn't it?) this vape came back on the front scene for me, I think the slightly less wide bowl make it to perform better with this mod (I lowered my temp and get very large clouds) and it's a lot more convenient than the stock screen which tend to fall if you are not taking care.

Thank you for sharing this amazing idea @Improvaper , you said to not stir... I stir myself cause I find the taste&clouds better&bigger with stirring. I probably load more than you did though.

The TKV is a very well designed vaporizer, I wish the creator will be able to get it under production, if I had the money I would have invested in your business in order to help @Berimbolero , good luck and I'm glad you are still in business with the new colored TKV!
 
ConvectCode1

ConvectCode1

Well-Known Member
I got a response on Instagram but it wasn’t what I was hoping for. And no, this guy had nothing to do with the Bowle or it’s conception I was totally incorrect about that dumb assumption, my mistake. I was less than enthusiastic about the response I got regarding availability and price.
 
ConvectCode1,
  • Like
Reactions: dimmusp
Just Justin

Just Justin

Well-Known Member
Really interested in buying one of these in the USA. Sent him a message on his instagram. Does he respond quickly?
 
Just Justin,
Just Justin

Just Justin

Well-Known Member
havewill1 said:
Yes he does, and it’s only available from him and it ships from the Philippines
Click to expand...
Thanks for info.

Gotta have one of these! Hoping it’s like the Tafee Bowle but in a more compact / ergonomic design. Looove the Bowle but not into the cup design…
 
Just Justin,
Just Justin

Just Justin

Well-Known Member
Heard colored units are coming? Rumor or any confirmation?

Still waiting to hear back from him on device price/availability
 
buckhakeesah

buckhakeesah

Well-Known Member
It has landed and the first thing to do was the tafee bowle mod. Like folks have been sharing it seems like it was made for it. Cannot wait to test this sucker out. Thank you @Berimbolero Fit and finish on mine is quite good. I'm geeked to play around with it.

Only had time to run one bowl before heading out to San Francisco but I think with some tweaking of settings and draw strength, I’m hoping to get near Tafee quality vapor, that’s the hope anyway. Right now the vapor was similar to the RCV glow if I had to compare based on very first experience.

Had a hotspot but hoping to work that out by bringing the temp down some. I really like it though. The wobbly buttons and the body might not be for some people but I’m super gentle with my gear so it will definitely be in the mix moving forward. Nice creation!
 
Last edited:
P

PossumMD

Well-Known Member
Anyone heard back from this manufacturer recently? I pinged them on IG a bit over a week ago and haven't heard back. Just wondering if my sketchy IG handle is cursing me again (I guess that's what I get for randomly mashing my keyboard to make a handle).
 
PossumMD,
HughJass

HughJass

Well-Known Member
buckhakeesah said:
I’m hoping to get near Tafee quality vapor
Click to expand...
This is what interests me the most about this device. In theory it’s a Pocket Portable Bowle.
Have you had more time to tinker with it, and have the results improved at all?

And let me know if you do get ahold of him @PossumMD
I don’t Need another device right now, but I do wish I could take the bowle with me everywhere, which I think this could substitute nicely for times where pocketing is necessary.
 
HughJass,
buckhakeesah

buckhakeesah

Well-Known Member
No, since returning home I misplaced the device and I’m in search mode, hopefully it turns up soon so I can get back to tinkering with it.
 
buckhakeesah,
Just Justin

Just Justin

Well-Known Member
PossumMD said:
Anyone heard back from this manufacturer recently? I pinged them on IG a bit over a week ago and haven't heard back. Just wondering if my sketchy IG handle is cursing me again (I guess that's what I get for randomly mashing my keyboard to make a handle).
Click to expand...
I had better luck contacting him directly here on fc.com

Tried on instagram as well with no luck but heard back from here
 
Just Justin,
  • Like
Reactions: HughJass
buckhakeesah

buckhakeesah

Well-Known Member
Found my TV. I’m down to 195 and it’s where I’ve enjoyed it most. Having some hot spotting still but it might be due to my draw and it’s gotten better with more tinkering with lowering temps and draw strength.

The ceramic tafee Bowle is a definite upgrade in my eyes for this thing. Can’t believe how well it fits. The stock glass bowl had some yellow tape/lining on it? Did anyone else’s have that on their stock bowl. Not sure if the creator intended for it to be that way or just forgot to remove it? I prefer the tafee bowle anyhow for this thing to hold my flower and never used the stock one yet.

I know he had very limited units to sell when I got my order in. All concerns have been documented well here from other users. I tend to stay away from plastic vapes but this thing got me and I’m quite happy with my purchase to have something with replaceable batteries and top down heating.

Hoping others get a chance to try it.
 
buckhakeesah,
  • Like
Reactions: HughJass
iDRINKBLEACH

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
havewill1 said:
How’d you make it work
Click to expand...
https://imgur.com/a/0SB0gwW
https://imgur.com/a/nPmhGkH
I took the bottom metal plate off and drilled a hole through the plastic with a 5/8 bit, then sized up with a step bit. Took the glass liner out since my stem goes all the way to the heater . Stem I put an o ring on, actually have two on there now. I found another that worked after the pic. The OG stem adapter had no airflow going to it because my stem, but I wrapped it with silicone because thing gets pretty warm
Grass Yes said:
Great looking MP, but also look at all those Atlas handles! 😍
Click to expand...
Oh yeah bro. I think there’s 3-4 atlas and 6-7 halos. Wiring tomorrow in the evening after getting some other wood stuff done. Busy as heck now that I’m able to work with no issues
 
iDRINKBLEACH,
  • Like
Reactions: Grass Yes
H

havewill1

Well-Known Member
iDRINKBLEACH said:
https://imgur.com/a/0SB0gwW
https://imgur.com/a/nPmhGkH
I took the bottom metal plate off and drilled a hole through the plastic with a 5/8 bit, then sized up with a step bit. Took the glass liner out since my stem goes all the way to the heater . Stem I put an o ring on, actually have two on there now. I found another that worked after the pic. The OG stem adapter had no airflow going to it because my stem, but I wrapped it with silicone because thing gets pretty warm

Oh yeah bro. I think there’s 3-4 atlas and 6-7 halos. Wiring tomorrow in the evening after getting some other wood stuff done. Busy as heck now that I’m able to work with no issues
Click to expand...
Oh man, so I have to send my unit back to you then lol
 
havewill1,
iDRINKBLEACH

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
havewill1 said:
Oh man, so I have to send my unit back to you then lol
Click to expand...
haha, it does make a huge difference in enjoy ability for me. I hate the o ring around the bowl when I would open it and cashing and exchanging herb. Now I can just pull the stem, blow it out and repack. Heats more even since the air is gettin pulled straight through instead of pulling air more into one side from the L shape
 
iDRINKBLEACH,
H

havewill1

Well-Known Member
iDRINKBLEACH said:
haha, it does make a huge difference in enjoy ability for me. I hate the o ring around the bowl when I would open it and cashing and exchanging herb. Now I can just pull the stem, blow it out and repack. Heats more even since the air is gettin pulled straight through instead of pulling air more into one side from the L shape
Click to expand...
Let me know and I’ll ship back on my own dime
 
havewill1,
  • Like
Reactions: Adobewan
iDRINKBLEACH

iDRINKBLEACH

knowing is half the power - Gi-JOE
Accessory Maker
havewill1 said:
Oh shit I’m an idiot lol I thought you were the maker for a second
Click to expand...
Haha all good brother. My unit is the first purchased and received unit and the bowl was driving me crazy to where I didn’t use it much any more even though it is a great vape so instead of collecting dust I modded it. I did make the stem for it though.
 
You must log in or register to reply here.
Top Bottom