I normally take 4 or 5 hits like vape exhale vape exhale and so on (using the carb hole so I touch the bowl after my last hit to put the bowl aside) after that the bowl is warm/hot like a fresh filled coffee mug you can keep it in your hand for a while but then you want to put it away.
Yes the heater gets really hot.
.
yea especially if it was left on all day, which I wont be doing, this vvps spiked even more then my eds tnt, it was 11.4 set and idled down to 10.8ish by end of night, and today not touching the dial, turning it on - it jumps back to 11.8 (I use a smart plug). Also the smart plug tracks kwh usage so I can tell everyone how much its costing me to power up the vapbong per day/month
Thankfully this thread is not that long yet, so I'd highly recommend new owners skim through, or potential owners, because I keep seeing the same questions asked over and over again. It is good though since we are getting more new owners in here, we'll get more opinions and perspective, however some questions in my opinion don't really need that... Remember there is also the search feature at the top, to look for specific keywords and members' posts etc. Anyway I'm going to answer some again because I hate myself:
If you are afraid of getting bored, not being able to use different glass with it, and you also want to see your vapor fill up in said glass, then yeah this may not be for you... However durability of ceramic should actually be greater than most glass, it is very thick and glazes very strong, so if you do want something very different from your FP at least then it is worth getting it... they will feel different to you, so you will be mixing things up that way!
Yes absolutely it does not get hot at all, if you are taking it off to clear each hit, and leaving it off until you are ready to take your next hit, there is zero issue at all. If you put it on and wait and don't take your hit it will start to warm up, but it won't get too hot to the touch for a while, 5-10 minutes is no problem! and if it does get warm, only a part of the sphere will get warm first, so you can still hold it by the other part to empty the bowl right away etc.
Nice, good for you and your friend, your Yadro was already made though, it did not ship yet? I'm not sure even if they have it, if they are able to make the sphere. Each sphere is matched up to each vapbong, so they need to be made at the time of building in order to fit properly... I am not sure it would ever be possible to make a second sphere for a unit that is already produced and glazed, in fact I don't think I have ever seen any unit they've ever made that came with two spheres... but I was thinking that could be a cool request for a future custom order at least!
Okay so the VVPS did not spike up while it was on though, when it is turned on it tends to drop a bit, and then settle in and not change, unless you change it. However yes when you go to turn it on, it will be higher, for example: every time I turn mine on it is already at about 12.2, and that will drop all the way down to 11 something in 10-20 minutes... So I would not consider that spiking at all, in fact it is good to turn it on and have it be higher, so it can warm up faster for you. Yes the dial is rather sensitive and it is a bit of a bitch to get it on a specific setting, but when you understand how it drops and voltage a little, it is not that difficult to play around with and get it more precise. Being precise also is not so important to me since it's not temperature control regardless...
So I think every VB and vvps has a voltage that it tends to start at when you turn it on, then it drops down and settles in. You can still control it to any setting you want, but this is the pattern I've noticed... It would be cool to have a more precise power supply, with temp control and the works, but it really is not so necessary for an effective experience, though it really could enhance it someday! I know they did say they were working on their own special made power supplies along with the new website, so hopefully we will see them in the new year!!
.
maybe if you weren't so good at explaining everything! haThankfully this thread is not that long yet, so I'd highly recommend new owners skim through, or potential owners, because I keep seeing the same questions asked over and over again. It is good though since we are getting more new owners in here, we'll get more opinions and perspective, however some questions in my opinion don't really need that... Remember there is also the search feature at the top, to look for specific keywords and members' posts etc. Anyway I'm going to answer some again because I hate myself:
If you are afraid of getting bored, not being able to use different glass with it, and you also want to see your vapor fill up in said glass, then yeah this may not be for you... However durability of ceramic should actually be greater than most glass, it is very thick and glazes very strong, so if you do want something very different from your FP at least then it is worth getting it... they will feel different to you, so you will be mixing things up that way!
Yes absolutely it does not get hot at all, if you are taking it off to clear each hit, and leaving it off until you are ready to take your next hit, there is zero issue at all. If you put it on and wait and don't take your hit it will start to warm up, but it won't get too hot to the touch for a while, 5-10 minutes is no problem! and if it does get warm, only a part of the sphere will get warm first, so you can still hold it by the other part to empty the bowl right away etc.
Nice, good for you and your friend, your Yadro was already made though, it did not ship yet? I'm not sure even if they have it, if they are able to make the sphere. Each sphere is matched up to each vapbong, so they need to be made at the time of building in order to fit properly... I am not sure it would ever be possible to make a second sphere for a unit that is already produced and glazed, in fact I don't think I have ever seen any unit they've ever made that came with two spheres... but I was thinking that could be a cool request for a future custom order at least!
Okay so the VVPS did not spike up while it was on though, when it is turned on it tends to drop a bit, and then settle in and not change, unless you change it. However yes when you go to turn it on, it will be higher, for example: every time I turn mine on it is already at about 12.2, and that will drop all the way down to 11 something in 10-20 minutes... So I would not consider that spiking at all, in fact it is good to turn it on and have it be higher, so it can warm up faster for you. Yes the dial is rather sensitive and it is a bit of a bitch to get it on a specific setting, but when you understand how it drops and voltage a little, it is not that difficult to play around with and get it more precise. Being precise also is not so important to me since it's not temperature control regardless...
So I think every VB and vvps has a voltage that it tends to start at when you turn it on, then it drops down and settles in. You can still control it to any setting you want, but this is the pattern I've noticed... It would be cool to have a more precise power supply, with temp control and the works, but it really is not so necessary for an effective experience, though it really could enhance it someday! I know they did say they were working on their own special made power supplies along with the new website, so hopefully we will see them in the new year!!
sameI really wish there was some way we could sticky useful information or links to useful posts in a respective thread but yeah sometimes I do the same and post even though it's been answered before. In my defence I love FuckCombustion and sometimes I look for an excuse to be here
In my defence I love FuckCombustion and sometimes I look for an excuse to be here
Might hate myself, but do love FC!
Speaking of, I just got some super fantastic tools from @RogueGuy RogueWaxWorks on reddit, who is having a sale on etsy right now too btw... I am going to post more in other threads, but a main reason I got so many is for my vapbongs so sharing here first!
Check out how perfect this purple galaxy handle matches my plum jelly bandit:
It also might be my favorite tip of those I got below, for vapbong use: perfect to stir and flip the bowl between hits, then scrape n scoop to empty after a session... But the tip of the aqua blue n black one is also pretty great for our VB's, and I find the curved spade tip to be very nice with mine too... Honestly, many others could be great!!
You can also message him for custom orders, if you want a specific tip and a specific handle, he has a lot more variety than what is listed in the store right now...
I should be getting the Yardro on Tuesday. I get what you mean. I read your explanation on this before. But felt it was worth a try to ask? Maybe the Doc and Jaxel duo is just that good?
I think it's just weekend after a very hectic week with all that orders in their shop.
Yeah dude, maybe you need to chill out a bit... Try not to take too much advantage of the great hands-on customer service and remember it's still just one guy responding! I get the idea if you can ask anything, what's the harm in asking, they can always say no, but you don't need to hassle them or go over the top with the asks lol 
LOL. Cmon now. I've already admitted to my annoyance and already feel rather embarrassed about it. I do need to emphasize though, that I've never intended to take advantage of anyone. My programming will not allow that lol. I've been taken advantage of many times though but i much prefer that. I sleep excellent at night lol.
And yeah I'm telling you that about the ball bowl sphere, because I'm pretty sure someone else in this thread had already asked it in the past and posted here earlier... And logically if your Yadro is en route and going to arrive soon, yeah I'm 99% sure it's impossible!
LOL. Cmon now. I've already admitted to my annoyance and already feel rather embarrassed about it. I do need to emphasize though, that I've never intended to take advantage of anyone. My programming will not allow that lol. I've been taken advantage of many times though but i much prefer that. I sleep excellent at night lol.
I'd also rather not be described as over the top or hassling, as I had only sent two emails. One before and another after my order. Definitely less than 30 minutes apart. I was highly medicated and I'm sure we all can understand and have been in numerous stoner moments ourselves. I'd send an email afterwards regardless to confirm my notes on the order. So it's just really one extra email.
I do apologize for already knowing it's close to impossible to make an extra bowl but still asking anyways. To be fair, I know nothing about ceramics and the team didn't really chime in to confirm.
Surely I'm not the monster you make me out to be?
Just kidding buddy! You know I love ya to bits!
Also I promise you we've all been there! And also high lol
, have no clue if thats good or bad lol
neither of my vapbongs came with spares but 3/4inch screens work great and are very easily found online or i even get mine at a local head shop.
