Collyland Aromatizer (formerly Vapbong by Art of Vapor)

LesPlenty

Well-Known Member
Company Rep
means even at 9v it draws 2.25A
Well you better let the maker know as he supplies the unit with a 2amp VVPS, the same one that Ed sells for his WS log (it can run 3x WS at once at 10v)..these supplies are rated 2amp at 24 and 30v so quite a bit less amps needed at 9 to 12v.
If I am wrong then this bong would cost a lot to run if left on 24/7.
 
LesPlenty,

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Well you better let the maker know as he supplies the unit with a 2amp VVPS, the same one that Ed sells for his WS log (it can run 3x WS at once at 10v)..these supplies are rated 2amp at 24 and 30v so quite a bit less amps needed at 9 to 12v.]
All your answers are here :
http://www.ohmslawcalculator.com/ohms-law-calculator
I will try to explain it to you cause i am sure the maker did his math.
http://fuckcombustion.com/threads/eds-woodscents-log-vape-eds-tnt.22287/page-25#post-1099615
Here it is mentioned that the WS uses 10 w heater and eats 0.8XXX amps at 12 vThen i guess it is a 14-15 ohm heater.You can see at the ed's site that he also has 12v 1a amp PSU listed. I cannot really tell which AIO VVPS he uses but if the range is 9-24v it is probably the 3amp model. ( https://www.banggood.com/Excellway-...-p-1250656.html?rmmds=search&cur_warehouse=CN)
-----------------------------------------------------------------------------------------------------------------------------------------
The VB uses 4 ohms which means it needs at least 3 amps at 12v(the mini dc vvps you suggested is rated only for 2a,and even it can handle more you cannot simply dial more than 2 amps,so it would never be able to run 9v on a 4 ohm heater) ,and 2.25amps at 9v (about 20watts). Also i think you are confused about the PSU that vapbong uses, look at the site https://www.art-of-vapor.com/shop-geöffnet/zubehör/trafos/ You can look the model up it is 3-12v 5a .>>>>> https://www.banggood.com/Excellway-...9.html?rmmds=search&ID=47184&cur_warehouse=CN
-----------------------------------------------------------------------------------------------------------------------------------------------------------
In other words you can run two WS at 12v for the price of 1 VB at 9v ,but the VB probably hits twice as hard :D..
-------------------------------------------------------------------------------------------------
Btw with the one i posted on the last page. You can probably run 5-6 Woodscents :) https://www.aliexpress.com/item/32986708904.html
----------------------------------------------------------
Another thing i want to mention is that those AIOs are a bit underrated.Meaning they are more powerful then listed. My 12v5a can pull up to 72w off the wall. Also they dont get as hot as the laptop PSUs when driven to their maximum. I have verified this with wall watt meter and a multimeter.
 
Last edited:

bornfree13

Well-Known Member
Well here goes the derail..I was trying to comment on the mini dc vvps which you can only dial amps up to 2a when at 9v you need 2.25 it would simply not work for the VB. You can easily run 2 WS off it ,though.
All your answers are here :
http://www.ohmslawcalculator.com/ohms-law-calculator

I dont know what the VVPS power supply is used on the WS,cause there is a sticker above it. Can you please tell me what is the voltage min - max range on it and i will solve that mystery for you.
Lookings at eds site ,i see that he also offer 12 1amp power supplies,Which means the heater is above 12 OHMS(he probably uses 20 ohm cartridge), which means it is not a problem to run 3 ws of 2amp power supply ,but the one which i suspect it uses is 9-24v 3a.
The one that vapbong uses is https://www.art-of-vapor.com/shop-geöffnet/zubehör/trafos/
You can look them model up if you dont trust me,but i own two of these and also have wattmeter and other measuring equipment. It is 3-12v 5a (actually it goes up to 12.3) .
Being 4 ohm doesn mean it would eat a lot of electricity though u can see that at 9v it eats 20watts which is not much compared to some other household items.You can run 2x WS at 12v for the price of one VB at 9v ,but the VB probably can rip twice harder :D..
--------------------
https://www.banggood.com/Excellway-...9.html?rmmds=search&ID=47184&cur_warehouse=CN
The one above is what vapbong uses.
I can only guess but if the WS can go above 12.3 i guess it is this one . https://www.banggood.com/Excellway-...-p-1250656.html?rmmds=search&cur_warehouse=CN
---------------------
I am open up for a private conversation if you want to discuss this any further :).
Btw with the one i posted on the last page. You can probably run 5-6 Woodscents :) https://www.aliexpress.com/item/32986708904.html
http://fuckcombustion.com/threads/eds-woodscents-log-vape-eds-tnt.22287/page-25#post-1099615
Here it is mentioned that the WS uses 10 w heater and eats 0.8XXX amps at 12 vThen i guess it is a 14-15 ohm heater.
Btw one thing i noticed measuring those excellway PSUs is they they are even a bit underrated(they are more powerful than listed),cause i can easily max their wattage out with some of mu DIYs and they dont get burning hot like my laptop PSUs when driven over the edge.
Also mine which 3-12v 5a which is supposed to be 60w can pull up to 72w on the wall meter.
------------------------
On a side not if the WS power supply is the one 3a 9-24v then you can use it for the vapbong,but you wont be able to go lower than 9v.


I dont know what the VVPS power supply is used on the WS,cause there is a sticker above it. Can you please tell me what is the voltage min - max range on it and i will solve that mystery for you:

Here are pics I just took of VVPS:

https://imgur.com/a/t2O0sWS

Does that work for you? I'd like to see somrthing digital with a 5.5/2.5 connection

Good Luck
 

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
I dont know what the VVPS power supply is used on the WS,cause there is a sticker above it. Can you please tell me what is the voltage min - max range on it and i will solve that mystery for you:

Here are pics I just took of VVPS:

https://imgur.com/a/t2O0sWS

Does that work for you? I'd like to see somrthing digital with a 5.5/2.5 connection

Good Luck
Thx i have noted in my post that the VB uses that model :)I was looking for the one WS uses. I even have posted a link.Are sure it is 2.5 mm,i thought it is 2.1mm like the WS.
 

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Hi i’m a young man
I’m High

Don’t know if it helps, but here are comparison pics of the WS & VB VVPS I just took.



I look forward to find the endgame VVPS. :)

All love <3
Thank you very much,so i guessed right bout the specs of the WS. Can you please just tell me on the last photo are those two different ,i cant really tell,looks like one is slightly bigger,so it is probably 2.5 mm . If it is so it might not be possible to use the WS supply on the VB ,maybe if you can but you will have to replace the connection or hardwire it :).
Dont know what the endgame is ,but there are some pretty accurate ones i suggested one the previous page,there is no soldering ,just screw terminals.DIY is going to be easy,but some people prefer ready made solutions :).(I can post parts list if anyone is interested,i have built myself many controllers and AIO units,featuring those led strip PSU for installation. )
 
Last edited:

VapeEnthusiast

Troy's Army
page,there is no soldering ,just screw terminals.DIY is going to be easy,but some people prefer ready made solutions :).(I can post parts list if anyone is interested,i have built myself many controllers and AIO units,featuring those led strip PSU for installation. )

I, for one, would be interested in a parts list and write up!
 
VapeEnthusiast,
  • Like
Reactions: lazylathe

dron19

Well-Known Member
I'm confused... are you still talking about the vapbong? and for some reason you want to modify the power supply? Guess I will have to see after I receive mine why it needs modifications as I thought everyone is pleased as is.
 

lazylathe

Almost there...
I'm confused... are you still talking about the vapbong? and for some reason you want to modify the power supply? Guess I will have to see after I receive mine why it needs modifications as I thought everyone is pleased as is.

The supplied power supply has a variable voltage knob and this adjustment knobs graduations are not fine enough, so the power will either move up or down once the heater has warmed up and everything is heat soaked.
What they are after is a buffer after the power adapter that will output a stable voltage throughout the entire session.
 

dron19

Well-Known Member
The supplied power supply has a variable voltage knob and this adjustment knobs graduations are not fine enough, so the power will either move up or down once the heater has warmed up and everything is heat soaked.
What they are after is a buffer after the power adapter that will output a stable voltage throughout the entire session.

Gotcha... that makes sense. Thanks!
 

lazylathe

Almost there...
I received an email saying my AoV Vap Bong has been shipped!!!
:o:brow::lol::cool::D:rofl::razz::clap::nod::rockon::clap:

I wonder if they received their batch of VVPS earlier than anticipated?
It would certainly seem so if they are shipping units!

Fingers crossed it is the Koi Pond design!
Just very excited now!!!
 

lazylathe

Almost there...
Mine shipped too! I was expecting it to be months before it got here.

Same here!!
The guys must be working full time now and firing a lot of vapes at a time!
Both the pottery and decorating sides must be just banging them out.

I wonder if @AoV Daniel has his massive new kiln up and running??
Big Blue looks like she can handle a number of vaporizers at a time!

Would be great to get some updates on the progress with orders and if the new VVPS came in!
Any updates are always appreciated!!
 

Collyland / Daniel

Manufacturer
Manufacturer
High guys !

I have ordered 2 batches of US power supplys from 2 different vendors - i received one batch by the end of last week. With this batch i was able to ship all orders to USA&Canada execpt 1 order. As soon as i received the other batch i will send the last order. :peace:
Indeed we are working pretty much at the moment, the 420 sale and its aftermath still keeps us pretty busy:lol: We are very happy and thankful that our business keeps going during these crazy times !
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Nice! Very exciting that the 420 orders are shipping to the US and Canada already!
Can't wait to see some fresh photos...

@AoV Daniel the site is moving over to a new domain btw, details here http://fuckcombustion.com/posts/1474975/
So it may be worth creating a new VapBong thread over there as soon as possible, then people can post there when they get their orders... It also has better image hosting :brow:
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Shit Snacks,

VapeEnthusiast

Troy's Army
There is very little draw restriction. It's one of the most free flowing air paths of any vape I've tried. The only 2 inhibitors of airflow are about twenty (yes, 20) small holes for air intake into the heating chamber, and the herb chamber screen, which is about the size of my thumb. As you can see from the pictures above, both of those areas have amazing airflow, those holes on the heater are probably 1/8 inch or so. With 20 of those, you can pull in a huge amount of air.

Woodland Fantasy? Mine has five holes as well, I believe that is normal if you compare to the others on the site... New art models up I see!

I agree... perhaps I'm misunderstanding this earlier post...?

Edit: @Shit Snacks Also, my unit is a Woodland Fantasy Special (if you want the full name). It's an art edition that looks somewhat like the standard Woodland Fantasy but with brown/reddish splotches and dark green outlines around some of the shapes. I'll post a picture... soon...
 
Last edited:
VapeEnthusiast,

Collyland / Daniel

Manufacturer
Manufacturer
My unit has 5 holes. It's a woodland special. The heating is very even despite having less holes than some seem to have!
they have all 5 holes now, we changed it because the smaller wholes can become clogged during manufacture.

@AoV Daniel the site is moving over to a new domain btw, details here http://fuckcombustion.com/posts/1474975/
So it may be worth creating a new VapBong thread over there as soon as possible, then people can post there when they get their orders... It also has better image hosting :brow:

thank´s i´ll register in the new forum. pretty sad thing your admin has gone lost :goon:

all orders are shipped now, we received our new bath of US power supply :tup:
 
Top Bottom